Northern Tool + Equipment Aluminum Storage Tote Truck Box - Diamond Plate, 20in.L x 10in.W x 9in.H

$74.98

The Northern Tool + Equipment aluminum tote storage box helps keep your tools organized, dry and secure. U.S.A. Dimensions: A=20in.; B=10in.; C=9in. Refers to image diagram above. Body Material: Aluminum, Body Finish: Tread Plate, Handle: Stationary, Lock Included: No, Tray included: No, Dimensions L x W x H (in.): 20 x 10 x 9 Lockable hatch [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool

Tradesman Steel Single-Lid Crossbed Truck Box - Rhino Lining Finish, 70in.L x 20 1/2in.W x 15 1/2in.H, Model# TSTF581RHINO

$529.98

Tradesman Truck Cross Bed Boxes with Rhino Linings protect your equipment from water, petroleum, chemicals, corrosion and abrasion. Rhino Linings are made from thick seamless polyurethane and will not crack or peel. protects against scratches and provides superior toughness and skid resistance. Limited lifetime warranty on Rhino Lining exterior coating. Dimensions: A=60 3/4in.; B=70in.; C=15 1/2in.; D=20 1/2in.; E=7in.; F=4 1/4in.; G=9 3/4in. Click Images tab below for more information. Lid Style: Single, Body Finish: Rhino Linings Coated Steel, Style: Standard, Gas Struts: Yes, Lock Included: Yes, Dimensions L x W x H (in.): 70 x 20 1/2 x 15 1/2 Fits most full-size trucks Ample storage space under truck box [Read more]

Store: Northern Tool and Equipment

Brand: Tradesman

Vestil Low-Profile Pallet Truck - 5000-lb. Capacity, Digital Scale, Model# PM-2748-SCL-LP

$1,499.98

The pallet truck with digital scale allows you to weigh your load on the spot for maximum efficiency. The frame uses heavy-duty steel construction for maximum strength and durability. This model is very user friendly and is suitable for low height lifting. Load Capacity (lbs.): 5,000, Min. Lift Height (in.): 3, Max. Lift Height (in.): 7 1/2, Extension Length (in.): 47 1/2, Extension Width (in.): 7, Outside Fork Width (in): 27 1/2, Overall Dimensions L x W (in.): 47 1/2 x 27 1/2, Includes: Keyboard calibration and functional setup with automatic-zero capabilities Built-in scale allows you to weigh your load as you are handling it Scale is selectable in a variety of increments to adjust to the size of your load Digital filtering is used to help compensate for vibration and motion to ensure accuracy Factory calibrated for shipping destination [Read more]

Store: Northern Tool and Equipment

Brand: Vestil

Torin Two Post Car/Truck Lift - 4 Ton Capacity, 137in.W x 144in.H, Model# QJY240B

$2,199.98

The Torin Series above-ground Symmetric Floorplate Lift offers an excellent auto lift designed for areas with more support in mind for cracked concrete issues. Designed for low-clearance ceilings on the light-duty level. Features heavy-duty lifting chains that are raised by two hydraulic cylinders, mechanical safety latches, adjustable lift pads and a wide base to keep you supported for years of work. Lift must be installed using epoxy anchors or anchors designed specifically for cracked concrete. Lift Capacity (lbs.): 8,000, Max. Rise (in.): 74, Pad Height (in.): 4.7, Drive-Thru Clearance (in.): 98, Overall Height (in.): 113.5, Overall Width (in.): 137.5, HP: 3, Motor Phase(s): 1, Volts: 220, Time of Full Rise (seconds): 60 Floorplate with sub-base assembly Symmetric equal length arms Safety locking system offers a unique two-position locking mechanism Symmetric equal length adjustable lifting arms 2.5 diameter cylinders Aircraft-quality equalizing cables Matted powder-coat finish 74in. lifting height clearance Best fit for low ceiling requirements [Read more]

Store: Northern Tool and Equipment

Brand: Torin Big Red

Trux Accessories LED Truck Light - 6in. Oval, Red

$11.98

This Trux Accessories LED truck light is designed to fit a standard 6in. oval grommet. Size (in.): 6, Shape: Oval, Color: Red, LED Light: Yes, Compatible With: 6 Inch oval grommet, Lights Included (qty.): 1 Contains 13 diodes [Read more]

Store: Northern Tool and Equipment

Brand: Trux Accessories

Truxedo TruXport Pickup Bed Cover - GM Full Size Trucks 2007-2009 with 5Ft.8In. Bed

$299.98

TruXport is a soft, roll-up tonneau cover that provides an economical alternative to snap-style and zip strip-style covers. Strong black vinyl-coated, leather-grain fabric. Rear cross member and bows roll up with the cover in less than 30 seconds and complete cover self-stores at the front of the bed. No parts to remove and no snaps, clips or zip-style strips to hassle with. Adjustable tension control keeps fabric tight in any weather. Positive latching mechanism delivers extra security. U.S.A. Cover Type: TruXport, Tension Control: Manual, Mounting Type: Top, Drilling Required: No, Cover Height Above Bed Rails (in.): 1 1/2, Color: Black, Warranty Length: 5 years, Latching System: Dual side latching, Material Type: Vinyl coated, leather grain fabric Fits GM full size trucks 2007-2009 with 5ft.8in. Bed [Read more]

Store: Northern Tool and Equipment

Brand: Truxport

Northern Tool + Equipment Aluminum Industrial Size Commercial Underbody Truck Box - Diamond Plate, 36in.L x 24in.W x 24in.H

$579.98

This Northern Tool + Equipment industrial truck box features a super heavy-duty 0.100in. thick aluminum construction that is designed for the rigors of over the road professional haulers. This rugged all-weather box can be mounted as a traditional underbody box or placed topside on the trailer frame or deck. U.S.A. Body Material: Aluminum, Body Finish: Tread plate, Handle: T-handle, Drawers (qty.): None, Drawer Material: None, Drawer Finish: None, Drawer Dimensions L x W x D (in.): None, Lock Included: Yes, Dimensions L x W x H (in.): 36 x 24 x 24 Single door design Lockable T-handle Diamond plate finish [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool

Ramsey Patriot Profile Truck Winch with Wireless Remote- 12,000-Lb. Capacity, Model# 109196

$1,349.98

Patriot Profile Truck Winch has an efficient 5.5 HP 12V DC series wound electric reversible motor for increased pulling power, proven 3-stage planetary gear system designed for fast line speed and 12,000 lbs. rated line pull (single line). Wireless remote system allows you to stand up to 50ft. away while operating the winch. U.S.A. Volts: 12, HP: 5.5, Line Pull (lbs.): 12,000, Gear Train: 3-stage planetary gears, Gear Ratio: 194:1, Clutch: Cam action for freespooling, Braking: Automatic load-holding, Switching Method: Handheld remote control and wireless, Remote Length (ft.): 12 and wireless, Rope Type: Wire cable with replaceable clevis hook and safety latch, Rope Size L x dia. (ft. x in.): 125 x 3/8, Fairlead Type: Roller, Battery Leads: 6ft. of 2-gauge cables with connectors, Dimensions L x W x H (in.): 22 3/8 x 7 25/32 x 8 29/32 3-stage planetary gear-reduction system provides the torque needed to get out of any situation Motor and solenoid are grounded directly to battery to prevent performance failures and damage to winch caused by poor grounding Cam action clutch disengages the planetary gear for free spooling Strong automatic load-holding brake Weather-resistant fully integrated solenoid assembly 4-way roller fairlead Drum size: 9in.L x 3in. dia. [Read more]

Store: Northern Tool and Equipment

Brand: Ramsey Winch

Truck and Trailer Winch - 15,000-Lb. Capacity, Model# 40849036

$1,499.00

High-capacity Winch has a 15,000-Lb. pulling capacity for use on industrial trucks and trailers. Line Pull (lbs.): 15,000, Line Speed (FPM): 23, Gear Train: 2-stage planetary, Gear Ratio: 23: 1, Clutch: Manual, Braking: Spring-applied disc brake, Rope Type: Not included, Rope Size L x dia. (ft. x in.): Not included, Fairlead Type: Roller, Mounting Hardware Included: No, Dimensions L x W x H (in.): 32 1/2 x 15 x 9 3/8 [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

SuperSprings Self-Adjusting Suspension Stabilizers - Fits Ford: 2001-08 E450 Class C RV; 2001-08 F450 Cutaway Box Trucks, Model# SSA21

$475.98

SuperSprings self-adjusting suspension stabilizers prevent sag on loaded vehicles, keeping cargo load level under heavy loads. Reduces sway and increases driver control and safety on heavy loads. U.S.A. Capacity (lbs.): 5,000, Includes (qty.): 2, Compatible With: Ford 2001-08 E450 Class C RV, and 2001-08 F450 cutaway box trucks Prevents sag on loaded vehicles, keeping cargo load level under heavy loads (Never exceed the gross vehicle weight rating) Reduces sway up to 30% and increases driver control and safety on heavy loads Extends the life of brakes, tires and existing suspension Quick, easy installation with no maintenance or adjustments required [Read more]

Store: Northern Tool and Equipment

Brand: SuperSprings

Mile Marker Hydraulic Winch Adapter Kit - For 1978-1996 Ford Full-Size Trucks, Model# 34-5010-07H

$429.98

This Mile Marker Hydraulic Winch Adapter kit for Mile Marker Series-H hydraulic winches includes everything you need to tap into an existing power-steering system and pull non-stop with your full-size Ford truck with Hydroboost. U.S.A. Application: Adapter kit, Works With: H-series hydraulic winches, Amps: 2, Compatible With: 1978-1996 Ford full-size trucks Remote with 12ft.L lead Rated to 7 GPM [Read more]

Store: Northern Tool and Equipment

Brand: Mile Marker

Mile Marker Hydraulic Winch Adapter Kit - For 1972-1987 GM C/K Trucks, 1988-1991 RV Models, Model# 34-5020-14

$429.98

This Mile Marker Hydraulic Winch Adapter kit for Mile Marker Series-H hydraulic winches includes everything you need to tap into an existing power-steering system and pull non-stop with your GM C/K or RV. U.S.A. Application: Adapter kit, Works With: H-series hydraulic winches, Amps: 2, Compatible With: 1972-1987 GM C/K trucks, 1988-1991 RV Remote with 12ft.L lead Rated to 7 GPM [Read more]

Store: Northern Tool and Equipment

Brand: Mile Marker

Northern Tool + Equipment Aluminum Single-Lid Crossbed Truck Box - Black, 72 1/4in.L x 20 1/2in.W x 15 1/2in.H

$349.98

This Northern Tool + Equipment single-lid crossbed truck box provides secure storage and protection for your tools and supplies. U.S.A. Dimensions: B=72 1/4in.; A=63in.; C=15 1/2in.; D=20 1/2in.; E=5 1/2in.; F=4 1/4in.; G=10in. Refers to image diagram above. Lid Style: Single, Body Material: Aluminum, Body Finish: Black Powder Coat, Style: Standard, Gas Struts: Yes, Lock Included: Yes, Tray included: Yes, Dimensions L x W x H (in.): 72 x 20 1/2 x 15 1/2 Fits wider bed trucks Allows storage under the box Full lid/black finish Domed lid for added aerodynamics 1-pc. main tub for greater strength Solid channel lid construction Storage at each end for assorted tools [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool

Buyers Retractable 3-Rung Truck Step - Model# RS3

$139.99

Retractable step features nonslip treads for safety. Sturdy steel with black finish. Dimensions L x W (in.): 30 1/2 x 14 3/8, Material: Steel, Nonskid Surface: Yes, Corrosion Resistant: Yes, Retractable: Yes, Rung (qty.): 3 Bolts onto truck with 17 3/8in.L bracket Model RS3 [Read more]

Store: Northern Tool and Equipment

Brand: Buyers Products

Northern Tool + Equipment Aluminum Storage Chest Truck Box - Diamond Plate, 60 3/4in.L x 20 1/2in.W x 18 1/2in.H

$319.98

This Northern Tool + Equipment aluminum truck chest storage box provides secure storage and protection for your tools and supplies. U.S.A. Dimensions: A=60 3/4in.; B=20 1/2in.; C=18 1/2in.; D=16 1/4in.; E=4in. Refers to image diagram above. Body Material: Aluminum, Body Finish: Tread Plate, Style: Standard, Offset Lid: Yes, Gas Struts: Yes, Lock Included: Yes, Dimensions L x W x H (in.): 60 3/4 x 20 1/2 x 18 1/2 Angled at bottom front and sidewalls to fit sloped bed walls and wheel wells Offset lid construction allows lid to open fully without back wall interference Flush mount/bright finish [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool

Northern Tool + Equipment Aluminum Heavy-Duty In-Frame Truck Box - Diamond Plate, Locking T-Handle Style, 24in.L x 22in.W x 10in.H

$379.98

This heavy-duty Northern Tool + Equipment in-frame truck box is designed for mounting between the frame and truck rails to provide low-profile access for storage of heavy chains, binders and tie-down straps. Features rugged 0.100 diamond plate aluminum construction. U.S.A. Application: To provide low-profile access for storage of heavy chains, binders and tie-down straps, Dimensions L x W x H (in.): 24 x 22 x 10, Handle Type: Locking T-handle, Finish Type: Smooth aluminum finish with diamond plate open lid, Mount Type: Between frame and truck rails T-handle [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool

Truxedo Premium Low-Profile Pickup Tonneau Cover - 2007-09 GM Trucks with 5Ft.8In. Bed with Track

$479.98

Truxedo is an all-climate, soft roll-up tonneau cover for pickups. Black vinyl-coated, leather-grain fabric is the strongest in the industry. U.S.A. Cover Type: Lo Pro QT, Tension Control: Auto, Mounting Type: Inside, Drilling Required: No, Cover Height Above Bed Rails (in.): 3/4, Color: Black, Warranty Length: Lifetime, Latching System: Driver side latch, one finger trigger, Material Type: Vinyl coated, leather grain fabric Fits 2007-09 GM trucks with 5ft.8in. bed with track Kits are preassembled and easily installed in about 20 minutes Side rails mount to the inside lip of the truck bed with specially designed clamps, allowing Truxedo to be used with other accessories Rear header and bows roll up with the cover and self-store behind cab for full access to the truck bed Trigger-style latch automatically secures every time and can be locked with locking tailgate Automatic tension control uses spring-loaded plungers to keep constant tension on the cover EPDM rubber seals on all 4 sides help keep elements out Velcro fastening system provides continuous contact with entire length of rail - no snaps or adhesives to fail [Read more]

Store: Northern Tool and Equipment

Brand: Truxedo Lo-Pro

Truxedo Lo Pro QT Pickup Tonneau Cover - 1967-1972 GM Full-Size Short Bed Trucks

$489.98

Truxedo Lo Pro QT is an all-climate, soft roll-up tonneau cover for pickups. Black vinyl-coated, leather-grain fabric is the strongest in the industry. U.S.A. Cover Type: Lo Pro QT, Tension Control: Auto, Mounting Type: Inside, Drilling Required: No, Cover Height Above Bed Rails (in.): 3/4, Color: Black, Warranty Length: Lifetime, Latching System: Driver side latch, one finger trigger, Material Type: Vinyl coated, leather grain fabric Fits 1967-1972 GM full-size short bed trucks Kits are preassembled and easily installed in about 20 minutes Side rails mount to the inside lip of the truck bed with specially designed clamps, allowing Truxedo to be used with other accessories Rear header and bows roll up with the cover and self-store behind cab for full access to the truck bed Trigger-style latch automatically secures every time and can be locked with locking tailgate Automatic tension control uses spring-loaded plungers to keep constant tension on the cover EPDM rubber seals on all 4 sides help keep elements out Velcro fastening system provides continuous contact with entire length of rail - no snaps or adhesives to fail [Read more]

Store: Northern Tool and Equipment

Brand: Truxedo Lo-Pro

Northern Industrial Convertible Log Cart and Hand Truck - 330-lb. Capacity

$69.98

This cart lets you easily move up to 330-lbs. of split logs. In addition to a dolly-like design, it has a pair of sturdy L-tubes that keep logs in order, like a mobile log rack. Remove the two L-tubes to convert the log cart into a hand truck, allowing you to manage even more tasks. Material: Steel, Dimensions L x W x H (in.): 24 13/16 x 27 x 46 7/8, Capacity (lbs.): 330 Made out of 2 5/22in. steel tubing 17 5/16in.L x 8 5/16in.W toe plate 24 13/16in.L x 27in.W x 46 7/8in.H overall 10in. pneumatic tires for easy riding [Read more]

Store: Northern Tool and Equipment

Brand: Northern Industrial Tools

PBE Truck Bed Roller Dolly, Model# RR500

$139.99

The PBE truck bed roller dolly stores or transports any truck bed. Store or transport any truck bed on this mobile frame dolly Supports up to 1000 lbs Rolls on four heavy-duty casters Folds for easy storage [Read more]

Store: Northern Tool and Equipment

Brand: Torin Big Red

Pierce Arrow Pickup Truck Dump Hoist Kit - 4000-Lb. Capacity, Dodge Long Bed 1984-1993

$1,349.98

Load capacity of kit is 4000 Lbs, but cargoes should not exceed GVW of your pickup. Lifts cargo box to a 45 angle in 10 seconds. Includes 12 Volt DC hydraulic pump, cylinder hardware. U.S.A. Capacity (lbs.): 4,000, Application: Pickup dump hoist kit, Works With: Dodge, long bed, Degree of Angle ( ): 45, Includes: 12 Volt DC hydraulic pump, cylinder hardware Fits: 1984-1993 Dodge Long Bed [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Coxreels Truck Series Hose Reel with EZ-Coil - 8 3/4in. x 25 1/2in. x 23in, 3/8in. x 75ft. Hose, Model# EZ-TSH-375

$499.98

The Coxreels Truck Series full-frame spring rewind hose reel offers a larger chassis and three support points to the center shaft with SuperHub for extra strength and stability. This EZ-Coil model features controlled retraction that reduces rewind speed up to 80% slower than conventional hose reels. U.S.A. Hose Diameter (in.): 3/8, Hose Length (ft.): 75, Max. PSI: 300, Dimensions L x W x H (in.): 8 3/4 x 25 1/2 x 23, Hose Application: Air, Water, Hose Included: Yes Includes adjustable guide arm for various mounting positions [Read more]

Store: Northern Tool and Equipment

Brand: Coxreels

Northern Industrial Pickup Truck Crane - 1000-Lb. Capacity

$149.99

Northern Industrial Pickup Truck Crane has boom that extends out to 51in. long. Pivots in base for easy loading. Includes bed-mounted base plate. Capacity (lbs.): 500 / 1,000, Lift Range (in.): 77, Base Size (in.): 10 x 10, Boom Length (in.): 51 Boom extends from 37in. to 51in. Pivots 360 in base for easy loading Lockpin set screws Hydraulic RAM provides lifting power Lifts 1000 lbs. fully retracted; 500 lbs. fully extended [Read more]

Store: Northern Tool and Equipment

Brand: Northern Industrial Tools

Vestil LP Tank Truck - 6-Tank Capacity, Model# LP-6

$2,389.98

This Vestil LP tank truck provides an easy answer to lifting storing and transporting problems associated with LP tanks. All-in-one cart will allow the user to transport LP tanks to the location they are needed. U.S.A. Common Usage: LP tank truck, Compatible With: Full LP tanks, Capacity: 6 Tanks (2 vertical and 4 horizontal), Dimensions L x W x H (in.): 80 x 33 x 73, Remote Included: No, Material Type: Welded steel, Finish Type: Painted, Cylinders (qty.): 6 Max. Built-in crane can be used to safely load full tanks into fork trucks Crane pivots 360 for maximum versatility Crane boom is raised and lowered with a manual hand pump hydraulic lift Tank attachment at the end of the boom automatically clamps to each end of the cylinder Unit includes a push handle with 2 rigid and 2 swivel casters for portability [Read more]

Store: Northern Tool and Equipment

Brand: Vestil

OTC Wide 20-Ton Truck Ramp Set, Model# 5269

$699.98

The OTC wide 20-ton truck ramp set is designed for use with vehicles with wider front wheels, such as cement, dump and garbage trucks. Load Capacity (lbs.): 40,000, Ramp Length (in.): 51, Ramp Width (in.): 16, Ramps (qty.): 2 Designed for use with vehicles with wider front wheels (cement, dump, garbage trucks) Non-skid rubber matting prevents slippage during use Long, 33in. retractable T-handle enhances mobility Durable, heavy-duty rubber wheels [Read more]

Store: Northern Tool and Equipment

Brand: OTC

Pierce Arrow Pickup Truck Dump Hoist Kit - 4000-Lb. Capacity, Chevy/GMC Long Bed 1988-98

$1,349.98

Load capacity of kit is 4000 Lbs, but cargoes should not exceed GVW of your pickup. Lifts cargo box to a 45 angle in 10 seconds. Includes 12 Volt DC hydraulic pump, cylinder hardware. U.S.A. Capacity (lbs.): 4,000, Application: Pickup dump hoist kit, Works With: Chevy, GMC, Degree of Angle ( ): 45, Includes: 12 Volt DC hydraulic pump, cylinder hardware Description: 88-98 Chev/GMC Long Bed [Read more]

Store: Northern Tool and Equipment

Brand: Pierce Sales

Pierce Arrow Pickup Truck Dump Hoist Kit - 4000-Lb. Capacity, Ford F250/350 Short Bed 1999-2007

$1,349.98

Load capacity of kit is 4000 Lbs, but cargoes should not exceed GVW of your pickup. Lifts cargo box to a 45 angle in 10 seconds. Includes 12 Volt DC hydraulic pump, cylinder hardware. U.S.A. Capacity (lbs.): 4,000, Application: Pickup dump hoist kit, Bed Size (ft.): 6 1/2, Works With: Ford, short bed, Degree of Angle ( ): 45, Includes: 12 Volt DC hydraulic pump, cylinder hardware Description: 6 1/2ft. Short Bed, 1999-2007 Ford F250/350 [Read more]

Store: Northern Tool and Equipment

Brand: Pierce Sales

Milton Truck Tire Inflator Gauge with 15-Ft. Hose - Osha Compliant, Model# 98-A1-501

$87.98

Milton designed the Series 500 inflator gauge in accordance with OSHA requirements requiring a safe distance between operator and tire during inflation. Hose Length (ft.): 15, Max. PSI: 10 - 160 15-ft. hose allows tire service personnel to be out of range of potential injury should a steel-belted tire rupture PSI range: 10-160. [Read more]

Store: Northern Tool and Equipment

Brand: Milton

Coxreels Truck Series Maximum-Duty Air Hose Reel - 1/2in. x 75ft. Hose, Max. 300 PSI, Model# TSH-N-475

$429.98

Coxreels Truck Series Maximum-Duty hose reel features the original Super Hub system, providing this reel with a third support point to the 1 solid steel axle. In addition, the Truck Series spring-rewind reel is strongly supported by a 1/4in. steel dual pedestal-style arm that spans from the roller guide bracket down to the sturdy mounting base to increase strength, durability and reliability in demanding environments. The reel has an adjustable guide arm for various mounting positions. Applications include air, water and oil on stationary or mobile units. U.S.A. Hose Diameter (in.): 1/2, Hose Length (ft.): 75, Max. PSI: 300, Material Type: Steel, Hose Application: Air, water, oil, Reel Capacity (Hose Length ft. x Hose Diameter in.): 1/2 x 75, Hose Included: Yes, Hose Temp Range ( F): Max 150 Solid brass NPT swivel inlet Arm guide adjusts to wall, ceiling or floor mounting positions Multiposition locking ratchet secures hose at desired length [Read more]

Store: Northern Tool and Equipment

Brand: Coxreels

Coxreels Truck Series Hose Reel with EZ-Coil - 8 3/4in. x 25 1/2in. x 23in, 1/2in. x 75ft. Hose, Model# EZ-TSH-475

$629.98

The Coxreels Truck Series full-frame spring rewind hose reel offers a larger chassis and three support points to the center shaft with SuperHub for extra strength and stability. This EZ-Coil model features controlled retraction that reduces rewind speed up to 80% slower than conventional hose reels. U.S.A. Hose Diameter (in.): 1/2, Hose Length (ft.): 75, Max. PSI: 300, Dimensions L x W x H (in.): 8 3/4 x 25 1/2 x 23, Hose Application: Air, Water, Hose Included: Yes Includes adjustable guide arm for various mounting positions [Read more]

Store: Northern Tool and Equipment

Brand: Coxreels

Monster Truck Wash Super Concentrate Kit - 6 Gallon by Monster Labs

$179.99

Use the cleaning fluid made from Monster truck wash to quickly and effortlessly dissolve road film, carbon stack, exhaust stains, black streaks, tar, bugs and tree sap, leaving glass and paint spot-free and sparkling-clean. Not for use on polished or anodized aluminum U.S.A. Usage: Repels road dirt, helping vehicles stay clean longer, Removal Of: Road film, carbon stack, exhaust stains, black streaks, tar, bugs and tree sap, Gallons: 6 6 gallon kit makes 55 gallons of concentrated cleaning fluid One gallon of concentrate is further diluted to make up to 30 gallons of cleaning fluid Makes up to 1650 gallons of ready to use formula Eliminates static which attracts dirt & dust Typical Uses: Tractors Trailers Fleet Maintenance Boats Aircrafts Off road vehicles Under carriages Carbon stack stain Wheel bearing grease Dirt and Mud [Read more]

Store: Northern Tool and Equipment

Brand: Monster

Coxreels Truck Series Hose Reel with EZ-Coil - 8 3/4in. x 25 1/2in. x 23in, 3/8in. x 100ft. Hose, Model# EZ-TSH-3100

$579.98

The Coxreels Truck Series full-frame spring rewind hose reel offers a larger chassis and three support points to the center shaft with SuperHub for extra strength and stability. This EZ-Coil model features controlled retraction that reduces rewind speed up to 80% slower than conventional hose reels. U.S.A. Hose Diameter (in.): 3/8, Hose Length (ft.): 100, Max. PSI: 300, Dimensions L x W x H (in.): 8 3/4 x 25 1/2 x 23, Hose Application: Air, Water, Hose Included: Yes Includes adjustable guide arm for various mounting positions [Read more]

Store: Northern Tool and Equipment

Brand: Coxreels

Northern Industrial Truck Tire Gauge

$10.98

Reads 10 to 150 PSI. Max. PSI: 150 [Read more]

Store: Northern Tool and Equipment

Brand: Northern Industrial Tools

Vestil Pallet Truck Hoist - 500-Lb. Capacity, Model# PJ Lift

$499.98

The Vestil Pallet Truck Hoist lifting jib installs on a standard 27in. x 48in. pallet truck to lift and lower loads to and from elevated work stations. For maximum convenience, the pallet truck may be used to transport pallets and skids while the hoist is installed. This allows the operator to transport, lift and lower loads with one piece of equipment. Pallet truck not included. U.S.A. Cable Length (ft.): 6 Uses a clutchless cable winch with an 80in. cable (88in. with hook and shackle) Constructed of high-strength steel with enamel finish Fork pockets measure 7 3/4in.W x 2 3/4in.H. 76 1/2in.H overall 30in.W base 22 3/4in.L boom 19in. hook from upright [Read more]

Store: Northern Tool and Equipment

Brand: Vestil

Pierce Arrow Pickup Truck Dump Hoist Kit - 4000-Lb. Capacity, Chevy/GMC Long Bed 1999-03

$1,349.98

Load capacity of kit is 4000 Lbs, but cargoes should not exceed GVW of your pickup. Lifts cargo box to a 45 angle in 10 seconds. Includes 12 Volt DC hydraulic pump, cylinder hardware. U.S.A. Capacity (lbs.): 4,000, Application: Pickup dump hoist kit, Works With: Chevy / GMC, long bed, Degree of Angle ( ): 45, Includes: 12 Volt DC hydraulic pump, cylinder hardware Description: 99-03 Chev/GMC Long Bed [Read more]

Store: Northern Tool and Equipment

Brand: Pierce Sales

Ken-Tool Heavy-Duty Double-End Truck Wrench, Model# TR10

$129.99

Use this Ken-Tool heavy-duty double-end truck wrench for off-road Budd-type wheels. Handle sold separately. U.S.A. Stock (in.): 1 1/4, Socket Sizes (in.): 1 3/4 hex and 15/16 square, Length (in.): 29 1/2 For Budd-type wheels Requires handle Item# 13490, sold separately Long length for extra leverage [Read more]

Store: Northern Tool and Equipment

Brand: Ken-tool

Pierce Arrow Flatbed Truck Hoist Kit - 7.5-Ton Capacity, 12ft. to 14ft. Flatbed

$1,999.98

Makes unloading faster. Lifts trucks flat bed to 45 dumping position in 30 to 45 seconds. Stop lifting and lowering in any position; cab-mounted switch. Installs on truck or trailer with flat, straight frame. Items 3309025 and 3309022 have heavier duty scissor and cylinder than item 3309021 to increase capacity. U.S.A. Capacity (lbs.): 15,000, Application: Flatbed truck hoist kit, Bed Size (ft.): 12 - 14, Works With: Flatbed, Degree of Angle ( ): 45 For Flatbed Truck Size: 12ft-14ft. Load Capacity: 7.5 Tons [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Tradesman Truck Steel Storage Tank with Rhino Lining - L-Shaped Tank, 92-Gallon Capacity, Model# TLST90RHINIO

$679.98

The Tradesman Truck steel storage tank features an extremely durable Rhino lining, which protects the tank from dents and corrosion. Tank Type: Storage, Mounting Type: Truck bed, Compatible With: Nonflammable and nonhazardous liquids, Tank Size (gal.): 92, Shape: L shaped, Overall Dimensions L x W x H (in.): 54 x 31 x 25, Material Type: Steel, DOT Approved: No, Includes: Extremely durable Rhino polyurethane lining Provides long life under harsh conditions Protects against damage from water, petroleum and chemicals Ideal for storing diesel, fertilizer and water Not intended for transferring gasoline or other flammables Should not be used as an auxiliary fuel tank [Read more]

Store: Northern Tool and Equipment

Brand: Tradesman

Classic Accessories PolyPro III Deluxe Truck Camper Cover - Fits 10Ft. Camper, Model# 8003715310100

$369.98

The Classic Accessories PolyPro II deluxe camper cover offers the ultimate in protection from precipitation and weather. Easy to use, easy to fit and adds years of protection and value to your truck camper. Cover Type: Truck camper, Material Type: PolyPro III, Top Layer (qty.): Triple, Side Layer (qty.): Single, UV Inhibitors: Yes, Zippered Access: Yes, Elastic Corners: Yes, Air Vents: Yes, Storage Bag Included: Yes, Tie-Downs Included: Yes, Cover Height: 102, Fits Length (ft.): 10, Dimensions L x W x H (in.): 235 x 102 x 102 PolyPro III triple-ply top resists rain and snow Single-ply sides protect against UV rays, dirt and scratches Vents out inside water vapor and condensation Zippered side and rear panels for easy access Adjustable tension panels and elasticized corners for a custom fit Integrated rope attachment system Included toss bag minimizes crawling under camper [Read more]

Store: Northern Tool and Equipment

Brand: Classic

Vestil Fork Truck Jack - Manual Hydraulic, 8000-Lb. Capacity, Model# FORK-J

$449.98

Designed to raise your fork truck for maintenance. Lift Capacity (tons): 4, Single, Pair, or Set: Set, Height Range (in.): 2 1/4 to 16, Material Type: High-quality seals, chrome-plated internal components and rugged steel construction Maximum lift of 16in. provides room needed to perform a variety of repairs Manually raised by hand pump lever Removable handle and compact size make it easy to maneuver and transport Includes 2 jack stands with holding pins for adjustable heights [Read more]

Store: Northern Tool and Equipment

Brand: Vestil

Pierce Arrow Pickup Truck Dump Hoist Kit - 4000-Lb. Capacity, Ford 1973-96 and Chevy/GMC 1973-87

$1,349.98

Load capacity of kit is 4000-Lbs, but cargoes should not exceed GVW of your pickup. Lifts cargo box to a 45 angle in 10 seconds. Includes 12 Volt DC hydraulic pump, cylinder hardware. Truck Ship. U.S.A. Capacity (lbs.): 4,000, Application: Pickup dump hoist kit, Works With: Ford and Chevy, Degree of Angle ( ): 45, Includes: 12V Dc hydraulic pump, cylinder hardware Description: Universal, 73-96 Ford, 73-87 Chev/GMC [Read more]

Store: Northern Tool and Equipment

Brand: Pierce Sales

Flatbed Truck Hoist Kit - 5-Ton Capacity, 8ft. to 12ft. Flatbed

$1,949.98

Makes unloading faster. Lifts trucks flat bed to 45 dumping position in 30 to 45 seconds. Stop lifting and lowering in any position; cab-mounted switch. Installs on truck or trailer with flat, straight frame. Items 3309025 and 3309022 have heavier duty scissor and cylinder than item 3309021 to increase capacity. Truck Ship. U.S.A. Capacity (lbs.): 10,000, Application: Flatbed truck hoist kit, Bed Size (ft.): 8 - 12, Works With: Flatbed trucks, Degree of Angle ( ): 45 For Flatbed Truck Size: 8ft-12ft. Load Capacity: 5 Tons [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Coxreels Truck Series Maximum-Duty Air Hose Reel - 3/8in. x 75ft. Hose, 300 PSI, Model# TSH-N-375

$499.98

Coxreels Truck Series Maximum-Duty hose reel features the original Super Hub system, providing this reel with a third support point to the 1 solid steel axle. In addition, the Truck Series spring-rewind reel is strongly supported by a 1/4in. steel dual pedestal-style arm that spans from the roller guide bracket down to the sturdy mounting base to increase strength, durability and reliability in demanding environments. The reel has an adjustable guide arm for various mounting positions. Applications include air, water and oil on stationary or mobile units. U.S.A. Hose Diameter (in.): 3/8, Hose Length (ft.): 75, Max. PSI: 300, Material Type: Steel, Hose Application: Air, water, oil, Reel Capacity (Hose Length ft. x Hose Diameter in.): 75 x 3/8, Hose Included: Yes, Hose Temp Range ( F): Max 150 Solid brass NPT swivel inlet Arm guide adjusts to wall, ceiling or floor mounting positions Multiposition locking ratchet secures hose at desired length [Read more]

Store: Northern Tool and Equipment

Brand: Coxreels

Ranger Super-Duty Truck Tire Changer - Model R2600HD

$6,499.99

Heavy-duty tire changer handles BIG truck tires! Features super duty spindle arm construction and powerful 4-jaw chuck. Handles steel and alloy rims up to 26in. and tire/wheels up to 63in. U.S.A. Application: Tire changer, Volts: 208-230, Tire Diameter (in.): 63 Super duty spindle arm construction Powerful 4-jaw chuck Handles steel and alloy rims from 14in. up to 26in. Accommodates 63in. max. diameter tire/wheel; 31 1/2in. max. tire/wheel width Electric/hydraulic drive system Adjustable hydraulic pressure Remote control pedestal for safe, easy operation Armor-plate disc bead breaking system Operates on 208-230V, 60Hz, single-phase Different voltages available on request [Read more]

Store: Northern Tool and Equipment

Brand: Ranger Products

TSI Chain-It Tight Chain Tightener - For Commercial Trucks, Model# CT-060

$39.99

The quick, easy and safe way to tighten tire chains on commercial trucks. Tired of damaging your passenger and light truck vehicles due to loose chains? Tired of buying replacement tighteners after a couple of uses? Eliminate your worries of losing your chains when you need them the most with Chain-It Tight. U.S.A. Application: Commercial trucks, Storage Case Included: Yes, Dimensions L x W x H (in.): 8 x 6 x 3 Provides the uniform tension chains need [Read more]

Store: Northern Tool and Equipment

Brand: TSI

RDS Diesel Install Kit for Auxiliary Diesel Fuel Tank - Fits Chevy/GMC Trucks thru 2010, Model# 011029

$79.98

This RDS kit is designed to connect your auxiliary diesel fuel tank to your trucks fuel fill hose and provide consistent gravity feed of fuel. Automatically controls the fuel level going into your OEM tank so that it does not overfill. Easy, simple installation. Kit includes hoses, clamps and fittings. Intended for diesel fuel only. Application: Installing diesel tank, Compatible With: 2000 - 2010 Chevy/GMC trucks and 2000 and some older Ford trucks, Fuel Type: Diesel Fits all Chevy/GMC trucks up to and including 2010 models Fits some Ford 2000 and older trucks with 2in. fuel fill hoses [Read more]

Store: Northern Tool and Equipment

Brand: RDS

Coxreels Truck Series Hose Reel with EZ-Coil - 8 3/4in. x 21 13/16in. x 19 5/8in, 3/8in. x 50ft. Hose, Model# EZ-TSH-350

$429.98

The Coxreels Truck Series full-frame spring rewind hose reel offers a larger chassis and three support points to the center shaft with SuperHub for extra strength and stability. This EZ-Coil model features controlled retraction that reduces rewind speed up to 80% slower than conventional hose reels. U.S.A. Hose Diameter (in.): 3/8, Hose Length (ft.): 50, Max. PSI: 300, Dimensions L x W x H (in.): 8 3/4 x 21 13/16 x 19 5/8, Hose Application: Air, Water, Hose Included: Yes Includes adjustable guide arm for various mounting positions [Read more]

Store: Northern Tool and Equipment

Brand: Coxreels

Coxreels Truck Series Hose Reel with EZ-Coil - 8 3/4in. x 25 1/2in. x 23in, 1/2in. x 100ft. Hose, Model# EZ-TSH-4100

$599.98

The Coxreels Truck Series full-frame spring rewind hose reel offers a larger chassis and three support points to the center shaft with SuperHub for extra strength and stability. This EZ-Coil model features controlled retraction that reduces rewind speed up to 80% slower than conventional hose reels. U.S.A. Hose Diameter (in.): 1/2, Hose Length (ft.): 100, Max. PSI: 300, Dimensions L x W x H (in.): 8 3/4 x 25 1/2 x 23, Hose Application: Air, Water, Hose Included: Yes Includes adjustable guide arm for various mounting positions [Read more]

Store: Northern Tool and Equipment

Brand: Coxreels

Legacy Truck Tire Inflator Kit with 3/8in. x 50ft. Flexzilla Hose

$49.99

Legacy Flexzilla Hybrid Polymer construction offers extreme all-weather flexibility, boasting a temperature range of 150 to -40 F! The superior bend radius, kink resistance, excellent abrasion-resistant cover and ZillaGreen color make this the ideal hose/inflator kit to have on the jobsite. Use your trucks on-board air supply to inflate tires in remote areas. 300 PSI working pressure. [Read more]

Store: Northern Tool and Equipment

Brand: Legacy

DEWALT Heavy-Duty Pavement Breaker with Hammer Truck and Chisels, Model# D25980KB

$1,699.98

The DEWALT Pavement Breaker is ideal for general concrete, sidewalk and road demolition, plus ground-rod driving and basement waterproofing. Features SHOCKS Active Vibration Control to reduce user fatigue and increases comfort and productivity. Blows Per Minute (BPM): 900, Amps: 15, Impact Energy (ft. lbs.): 61, Chisels Included: (1) Bull-point Chisel (1) 1in. Cold Chisel (1) 3in. Wide Chisel Motor provides maximum power and overload protection Rubber-coated handles for greater comfort and control Electronic soft start reducing bit walking Hammer truck easily transports pavement breaker [Read more]

Store: Northern Tool and Equipment

Brand: Dewalt

RDS Diesel Install Kit for Auxiliary Diesel Fuel Tank - Fits 1999-Current Ford, Dodge and 2011 Chevrolet and GMC Trucks, Model# 011025

$79.98

This RDS kit is designed to connect your auxiliary diesel fuel tank to your trucks fuel fill hose to provide consistent gravity feed of fuel. Automatically controls the fuel level going into your OEM tank so that it does not overfill. Easy, simple installation. Kit includes hose, clamps and fittings. Intended for diesel fuel only. Application: Installing diesel tank, Compatible With: 2001 and newer Ford and Dodge trucks, 2011 Chevrolet & GMC Trucks, Fuel Type: Diesel [Read more]

Store: Northern Tool and Equipment

Brand: RDS

Pierce Arrow Pickup Truck Dump Hoist Kit - 4000-Lb. Capacity, Dodge Full Size 1994-2002

$1,349.98

Load capacity of kit is 4000 Lbs, but cargoes should not exceed GVW of your pickup. Lifts cargo box to a 45 angle in 10 seconds. Includes 12 Volt DC hydraulic pump, cylinder hardware. U.S.A. Capacity (lbs.): 4,000, Application: Pickup dump hoist kit, Works With: Dodge full size pick up trucks, standard cab, long bed, Degree of Angle ( ): 45, Includes: 12V DC hydraulic pump, cylinder hardware Fits: 1994-2002 Dodge Full Size, Standard Cab, Long Bed [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Pierce Arrow Flatbed Truck Hoist Kit - 10-Ton Capacity, 14ft. to 16ft. Flatbed

$2,899.98

Makes unloading faster. Lifts trucks flat bed to 45 dumping position in 30 to 45 seconds. Stop lifting and lowering in any position; cab-mounted switch. Installs on truck or trailer with flat, straight frame. Items 3309025 and 3309022 have heavier duty scissor and cylinder than item 3309021 to increase capacity. U.S.A. Capacity (lbs.): 20,000, Application: Flatbed truck hoist kit, Bed Size (ft.): 14 - 16, Works With: Flat bed truck, Degree of Angle ( ): 45 For Flatbed Truck Size: 14ft-16ft. Load Capacity: 10 Tons [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Load Handler Cargo Unloader - 2000-Lb. Capacity, for Full-Size Trucks

$89.98

Unload firewood, black dirt, gravel, patio rock, lumber, building materials and more off the back of your truck with ease! Unloads cargo in as little as 30 seconds. Crank pulls the heavy-duty bed liner into the tailgate roller. Installs and removes in less than 5 minutes with no drilling or permanent installation required. U.S.A. Capacity (lbs.): 2,000, Application: Cargo unloader, Works With: Full size trucks Fits: Full Size Pickup Trucks including Toyota T-100 Perfect for home or personal use Use with a bed liner or bed mat [Read more]

Store: Northern Tool and Equipment

Brand: Load Handler

Load Handler Cargo Unloader - 2000-Lb. Capacity, for Small to Mid-Size Trucks

$89.98

Unload firewood, black dirt, gravel, patio rock, lumber, building materials and more off the back of your truck with ease! Unloads cargo in as little as 30 seconds. Crank pulls the heavy-duty bed liner into the tailgate roller. Installs and removes in less than 5 minutes with no drilling or permanent installation required. U.S.A. Capacity (lbs.): 2,000, Application: Cargo unloader, Works With: Small to mid-size trucks, Includes: Unloader kit, Material: Poly fabric Fits: Compact Pickup Trucks including Dakota and Step Sides Maximum Load Capacity: 2000 Lbs. Perfect for home or personal use Consists of heavy duty gauge poly fabric rolled onto a steel bar running the length of the tailgate Recommended to be used with bed liner [Read more]

Store: Northern Tool and Equipment

Brand: Load Handler

Tradesman Truck Steel Storage Tank with Rhino Lining - Rectangular Tank, 98-Gallon Capacity, Model# TRST98RHINIO

$569.98

The Tradesman Truck steel storage tank features an extremely durable Rhino lining, which protects the tank from dents and corrosion. Tank Type: Storage, Mounting Type: Truck bed, Compatible With: Nonflammable and nonhazardous liquids, Tank Size (gal.): 98, Shape: Rectangle, Overall Dimensions L x W x H (in.): 54 x 22 1/2 x 19 1/4, Material Type: Steel, DOT Approved: No, Includes: Extremely durable Rhino polyurethane lining Provides long life under harsh conditions Protects against damage from water, petroleum and chemicals Ideal for storing diesel, fertilizer and water Not intended for transferring gasoline or other flammables Should not be used as an auxiliary fuel tank [Read more]

Store: Northern Tool and Equipment

Brand: Tradesman

Sunex Truck Ratcheting Locknut Tool - 3/4in. Drive, Model# 10636

$34.99

This tool removes and installs the screw-in-type ball joints used on Chrysler and Dodge light trucks and vans. Single, Pair, or Set: Single, Vehicle Make: Chrysler and Dodge light trucks and vans, Common Usage: For the removal and installation of the screw in type ball joints, Works With: 29/64in. Ball joints, Drive (in.): 3/4, Material Type: CR-MO alloy steel, Storage Case Included: No, Includes: 1 Tool, Pieces (qty.): 1 [Read more]

Store: Northern Tool and Equipment

Brand: Sunex Tools

Ken-Tool Light Truck Lug Wrench, Model# 35690

$54.99

The Ken-Tool Light Truck Lug Wrench features welded center construction for strength and durability. Stock (in.): 3/4, Socket Sizes (in.): 7/8, 15/16, 1, 1 1/16, Material: Special bar quality steel Welded center construction for strength and durability U.S.A. [Read more]

Store: Northern Tool and Equipment

Brand: Ken-tool

Monster Truck Wash - 1 Gallon by Monster Labs

$10.98

Monster truck wash is an anti-static road film removal blend with excellent penetrating action that quickly dissolves road film, carbon stack; exhaust stains, black streaks, tar, bugs, and tree sap, leaving glass, chrome and painted surfaces spot free and sparkling clean. U.S.A. Usage: Tractors, Trailers, Fleet maintenance, Boats, Aircraft, Off road vehicles, Under carriages, Carbon stack stain, Wheel bearing grease, Dirt and mud, and Roadfilm, Removal Of: Road film, carbon stack; exhaust stains, black streaks, tar, bugs, and tree sap, Gallons: 1 Makes up to 30 gallons Eliminates static cling Repels road dirt so vehicle stays clean longer Contains tree extract ingredient Small amount of cleaning solution needed per job [Read more]

Store: Northern Tool and Equipment

Brand: Monster

Milton Dual Chuck Truck Tire Gauge - 20-120 PSI, Model# S-927

$7.98

2 sides, 20 to 120 PSI in 2 lb. increments and 2 sides, kilo pascals (kpa) 120 to 820 in 20 kpa increments. U.S.A. Max. PSI: 120 [Read more]

Store: Northern Tool and Equipment

Brand: Milton

Vestil Fork Truck LP Tank Caddy, Model# LP-170

$399.98

This Vestil fork truck LP tank caddy holds up to 6 LP tanks up to 12in. dia. U.S.A. Common Usage: Tank caddy, Compatible With: LP cylinders, Capacity: Holds up to 6 LP tanks that are up to 12in diameter, Dimensions L x W x H (in.): 41 x 38 x 29, Material Type: Steel, Finish Type: Painted, Cylinders (qty.): Up to 6, Closure Type: Safety chains to hold the tanks in place Portable with fork truck [Read more]

Store: Northern Tool and Equipment

Brand: Vestil

Campbell Hausfeld Service Truck Series Air Compressor - 13 HP Kohler Command Engine, 24.3 CFM @ 175 PSI, Model# CE7002

$2,399.98

Outfit your work truck with a gas-powered Campbell Hausfeld Service Truck Series air compressor. Ideal for fleet service trucks, welding/mechanics trucks, or worksite locations without electric power. Includes ACME-certified tank, pilot valve, throttle control, electric start and alternator charging system. U.S.A. Max. PSI: 200, Air Tank Size (gal.): 30, Tank Description: Horizontal, Pump: 2 stage, Engine: Kohler Command, HP: 13, Portable or Stationary: Stationary, Dimensions L x W x H (in.): 21 x 44.5 x 52.5 [Read more]

Store: Northern Tool and Equipment

Brand: Campbell Hausfeld

Campbell Hausfeld Service Truck Series Air Compressor - 14 HP Subaru EX40 Engine, 24.3 CFM @ 175 PSI, Model# CE7004

$2,199.98

Outfit your work truck with a gas-powered Campbell Hausfeld Service Truck Series air compressor. Ideal for fleet service trucks, welding/mechanics trucks, or worksite locations without electric power. Includes ACME-certified tank, pilot valve, throttle control, electric start and alternator charging system. U.S.A. Max. PSI: 200, Air Tank Size (gal.): 30, Tank Description: Horizontal, Pump: 2 stage, Engine: Subaru EX40, HP: 14, Portable or Stationary: Stationary, Dimensions L x W x H (in.): 25 x 49.5 x 53 [Read more]

Store: Northern Tool and Equipment

Brand: Campbell Hausfeld

Northern Industrial Truck Wheel Dolly - 150-Lb. Capacity

$49.99

Heavy duty dolly lifts up to 150 lbs. Saves backs when removing and replacing heavy truck wheels and tires. 3in. casters allow accurate positioning under tire. Dolly supports weight as wheel slides off hub. Replacing wheel is just as simple. Rollers on each leg allow wheel to be rotated for stud alignment as wheel slides onto hub. Capacity (lbs.): 150, Caster Size (in.): 3 [Read more]

Store: Northern Tool and Equipment

Brand: Northern Industrial Tools

Monster Truck Wash - 5 Gallon by Monster Labs

$44.99

Monster truck wash is an anti-static road film removal blend with excellent penetrating action that quickly dissolves road film, carbon stack; exhaust stains, black streaks, tar, bugs, and tree sap, leaving glass, chrome and painted surfaces spot free and sparkling clean. U.S.A. Usage: Anti-static road film removal blend with excellent penetrating action leaving glass, chrome and painted surfaces spot free and sparkling clean, Removal Of: Road film, carbon stack; exhaust stains, black streaks, tar, bugs, and tree sap, Gallons: 5 Makes up to 100 gallons Eliminates static cling Contains tree extract ingredient Small amount of cleaning solution needed per job Typical Uses: Tractors Trailers Fleet maintenance Boats Aircraft Off road vehicles Under carriages Carbon stack stain Wheel bearing grease Dirt and mud Roadfilm [Read more]

Store: Northern Tool and Equipment

Brand: Monster

Torin Two Post Car/Truck Lift - 9000-Lb. Capacity, 135in.W x 142in.H, Model# QJY3.8G

$2,199.98

The Torin Commercial Series Symmetric Clear Floor Lift offers an excellent above-ground auto lift at price that fits any shop size. Designed for high clearance ceilings and a narrow floorspace. Features heavy-duty lifting chains that are raised by two hydraulic cylinders, mechanical safety latches, adjustable lift pads and a wide base to keep you supported for year of work. The key feature of this lift is you get the space of a symmetric lift with the use of asymmetric lifting arms. Lift Capacity (lbs.): 9,000, Max. Rise (in.): 79, Pad Height (in.): 4.7, Drive-Thru Clearance (in.): 91 1/2, Overall Height (in.): 142, Overall Width (in.): 135, HP: 3, Motor Phase(s): 1, Volts: 220, Time of Full Rise (seconds): 60 9000-lb. lifting capacity Safety Locking System offers a unique two-position locking mechanism 2.5+/- diameter cylinders Aircraft-quality equalizing cables Matted powder-coat finish [Read more]

Store: Northern Tool and Equipment

Brand: Torin Big Red

Coxreels Truck Series Maximum-Duty Air Hose Reel - 3/8in. x 100ft. Hose, Max. 300 PSI, Model# TSH-N-3100

$449.98

Coxreels Truck Series Maximum-Duty hose reel features the original Super Hub system, providing this reel with a third support point to the 1 solid steel axle. In addition, the Truck Series spring-rewind reel is strongly supported by a 1/4in. steel dual pedestal-style arm that spans from the roller guide bracket down to the sturdy mounting base to increase strength, durability and reliability in demanding environments. The reel has an adjustable guide arm for various mounting positions. Applications include air, water and oil on stationary or mobile units. U.S.A. Hose Diameter (in.): 3/8, Hose Length (ft.): 100, Max. PSI: 300, Material Type: Steel, Hose Application: Air, water, oil, Reel Capacity (Hose Length ft. x Hose Diameter in.): 3/8 x 100, Hose Included: Yes, Hose Temp Range ( F): Max 150 Solid brass NPT swivel inlet Arm guide adjusts to wall, ceiling or floor mounting positions Multiposition locking ratchet secures hose at desired length [Read more]

Store: Northern Tool and Equipment

Brand: Coxreels

Pierce Arrow Pickup Truck Dump Hoist Kit - 4000-Lb. Capacity, Ford F250/350 Long Bed 1999-2008

$1,349.98

Load capacity of kit is 4000 Lbs, but cargoes should not exceed GVW of your pickup. Lifts cargo box to a 45 angle in 10 seconds. Includes 12 Volt DC hydraulic pump, cylinder hardware. U.S.A. Capacity (lbs.): 4,000, Application: Pickup dump hoist kit, Bed Size (ft.): 8, Works With: Long bed, Ford, Degree of Angle ( ): 45, Includes: 12 Volt DC hydraulic pump, cylinder hardware Description: 8ft. Long Bed, 1999-2008 Ford (fits F250/350 only) [Read more]

Store: Northern Tool and Equipment

Brand: Pierce Sales

Vestil Fork Truck Jack - Air, 44,000-Lb. Capacity, Model# AIR-J

$669.98

Air powered for quick and easy operation. Air-assist motor quickly raises saddle to lift point and then lifts load to desired height. Lift Capacity (tons): 22, Min. Lift Height (in.): 8 1/4, Max. Lift Height (in.): 18 1/4, Operation: Air 44,000-lb. capacity Uses standard coupler hook-up to a shop air compressor with air regulator control lever handle Pressure relief valve is located on top of handle for metered control and load height adjustment [Read more]

Store: Northern Tool and Equipment

Brand: Vestil

Ken-Tool Heavy-Duty Truck Wrench - Model# TR10

$109.98

Use the Ken-Tool Heavy-Duty Truck Wrench for off-road Budd-type wheels. Requires handle Item# 133402, sold separately. U.S.A. Socket Sizes (in.): 1 3/4 hex and 15/16 square, Length (in.): 30 Use for off-road Budd-type wheels Requires handle Item# 133402, sold separately [Read more]

Store: Northern Tool and Equipment

Brand: Ken-tool

T & E Tools Heavy-Duty 4-way Truck Wheel Wrench, Model# TW5000

$79.98

Drop-forged, CR-V alloy steel truck wheel wrench handles the most popular size lug nuts. Socket Sizes (in.): Works with any 3/4 Inch drive socket, Material: CR-V alloy steel, Length (in.): 27 x 27 1 1/8in. (28mm) x 1 1/4in. (32mm) 1 1/2in. (38mm) x 3/4in. square drive for use with any 3/4-drive socket [Read more]

Store: Northern Tool and Equipment

Brand: T & E Tools

MTP Air-Operated Truck/RV Tire Spreader, Model# EZ-RVT

$799.98

Heavy-duty pneumatic tire spreader is easy to operate. Works on passenger, RV and truck tires up to 12in. wide. Dimensions L x W x H (in.): 24 x 24 x 41, Typical Application: Passenger, RV, truck tires Spreads and holds bead Handles tires up to 12in.W Sidewall adjustments Foot pedal operated Includes flex-arm light and utility tray Heavy-duty pneumatic cylinder with filter/regulator/lubricator [Read more]

Store: Northern Tool and Equipment

Brand: MTP

TSI Chain-It Tight Chain Tightener - For Commercial Trucks With 24 1/2in. Tires, Model# CT-065

$39.99

The quick, easy and safe way to tighten tire chains on commercial trucks with 24 1/2in. tires. Tired of damaging your passenger and light truck vehicles due to loose chains? Tired of buying replacement tighteners after a couple of uses? Eliminate your worries of losing your chains when you need them the most with Chain-It Tight. U.S.A. Application: Commercial trucks, Storage Case Included: Yes, Dimensions L x W x H (in.): 8 x 6 x 3 Chain tightener for 24 1/2in. tires Provides the uniform tension chains need [Read more]

Store: Northern Tool and Equipment

Brand: TSI

Northern Industrial Pickup Truck Crane - 1000-Lb. Capacity

$179.99

This Swiveling Pickup Truck Crane lifts heavy trucks and trailers. Rotates 360 to access items from all sides and features a telescopic boom that extends from 35in. to 55 1/2in. Height range is from 31 in. to 71 in. Includes manual winch with 25-ft. cable to raise and lower cargo hook. Capacity (lbs.): 1,000, Lift Range (in.): 31 - 71, Base Size (in.): 9 1/2 x 7 1/2, Boom Length (in.): 35 - 55 1/2, Cable Length (ft.): 25, Column Diameter (in.): 3 1/2, Height from Base to Pump Support (in.): 26 3/16, Height from Base to Top (in.): 40 3/16 Boom Swings 360 Degrees for easy access to cargo Mounts directly to truck or trailer bed with 9 1/2 in. x 7 1/2 in. base plate I.D. of Bottom Section of Post: 3in. Lifts 1000 lbs. fully retracted Lifts 500 lbs. fully extended [Read more]

Store: Northern Tool and Equipment

Brand: Northern Industrial Tools

Campbell Hausfeld Service Truck Series Air Compressor - 13 HP Honda GX390 Engine, 24.3 CFM @ 175 PSI, Model# CE7003

$2,399.98

Outfit your work truck with a gas-powered Campbell Hausfeld Service Truck Series air compressor. Ideal for fleet service trucks, welding/mechanics trucks, or worksite locations without electric power. Includes ACME-certified tank, pilot valve, throttle control, electric start and alternator charging system. U.S.A. Max. PSI: 200, Air Tank Size (gal.): 30, Tank Description: Horizontal, Pump: 2 stage, Engine: Honda GX390, HP: 13, Portable or Stationary: Stationary, Dimensions L x W x H (in.): 25 x 49.5 x 53 [Read more]

Store: Northern Tool and Equipment

Brand: Campbell Hausfeld

Coxreels Truck Series Maximum-Duty Air Hose Reel - 1/2in. x 100ft. Hose, Max. 300 PSI, Model# TSH-N-4100

$579.98

Coxreels Truck Series Maximum-Duty hose reel features the original Super Hub system, providing this reel with a third support point to the 1 solid steel axle. In addition, the Truck Series spring-rewind reel is strongly supported by a 1/4in. steel dual pedestal-style arm that spans from the roller guide bracket down to the sturdy mounting base to increase strength, durability and reliability in demanding environments. The reel has an adjustable guide arm for various mounting positions. Applications include air, water and oil on stationary or mobile units. U.S.A. Hose Diameter (in.): 1/2, Hose Length (ft.): 100, Max. PSI: 300, Material Type: Steel, Hose Application: Air, water, oil, Reel Capacity (Hose Length ft. x Hose Diameter in.): 1/2 x 100, Hose Included: Yes, Hose Temp Range ( F): Max 150 Solid brass NPT swivel inlet Arm guide adjusts to wall, ceiling or floor mounting positions Multiposition locking ratchet secures hose at desired length [Read more]

Store: Northern Tool and Equipment

Brand: Coxreels

Pierce Arrow Pickup Truck Dump Hoist Kit - 4000-Lb. Capacity, Chevy Full Size Short/Wide Bed 1988-98

$1,349.98

Load capacity of kit is 4000 Lbs, but cargoes should not exceed GVW of your pickup. Lifts cargo box to a 45 angle in 10 seconds. Includes 12 Volt DC hydraulic pump, cylinder hardware. U.S.A. Capacity (lbs.): 4,000, Application: Pickup dump hoist kit, Works With: Chevy full size, short / wide, Degree of Angle ( ): 45, Includes: 12 Volt DC hydraulic pump, cylinder hardware Description: 1988-98 Chevy Full Size Short/Wide Pickup [Read more]

Store: Northern Tool and Equipment

Brand: Pierce Sales

Torin Big Red Truck Wheel Balancer - Model# TRE0448

$2,699.98

The Torin Big Red truck wheel balancer is an economical solution that is suitable for heavy-duty trucks, buses and other passenger vehicles, including cars and motorcycles. Max. Rim Width: 1.5 to 20 inches, Max. RPM: 215, Motor: 3-phase, 500W 200V/60 Hz Large, easy-to-read display High-capacity, high-stability microprocessor Self-calibration and self-diagnosis functions Can run static, dynamic or 3 ALU programs Easily converts from metric to SAE measurements Includes pneumatic lifter for heavy wheels Handles rims from 10in-24in. dia. Maximum wheel weight: 330 lbs. Maximum rim width: 1.5in-20in. Average balancing speed 215 RPM [Read more]

Store: Northern Tool and Equipment

Brand: Torin Big Red

Northern Industrial Tools Pickup Truck Crane - 750-Lb. Capacity

$619.98

Power-in, power-out high torque motor lifts and lowers up to 750 lbs. when installed on your 3/4- or 1-ton truck, and up to 500 lbs. on your 1/2-ton pickup truck. Great for lawn and garden, construction site, workshop or loading dock. Handles jobs too heavy for manual lifting. Remote control. Vented disk brake controls rate of load descent. Exclusive Torq handle easily rotates the 2-position boom a full 360. Crane arm has a vertical lift of 78in. and a horizontal reach of 37in. 4 FPM line speed at full load. Uses 12 to 15 Volts max. with a battery of at least 55 Ah and 450 CCA min. 12-ft. x 1/4in. aircraft cable included. Crane folds for transport. Base dia. 15 13/16in. D x 15 13/16in. Removes for storage. Ships truck freight only. Capacity (lbs.): 500 - 750, Lift Range (in.): 78, Base Size (in.): 15 13/16 x 15 13/16, Cable Length (ft.): 12 x 1/4 [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Trux Accessories LED Truck Light - 2in. Round, Red

$3.99

This Trux Accessories LED truck light is designed to fit a standard 2in. round grommet. Size (in.): 2, Shape: Round, Color: Red, LED Light: Yes, Compatible With: 2 Inch round grommet, Lights Included (qty.): 1 Contains 9 diodes [Read more]

Store: Northern Tool and Equipment

Brand: Trux Accessories

Buyers Steel Truck and Trailer Light Box - 6in. x 6in. x 3in.

$27.98

Black powder-coat steel with single round opening. U.S.A. Application: Truck and Trailer Light Box, Finish Type: Black Powder Coat, Material: Steel, Box Shape: Square, Opening Type: Round, Opening Size L x H (in.): 4 7/16, Opening Quantity: Single, Dimensions L x W x H (in.): 6 x 6 x 3 [Read more]

Store: Northern Tool and Equipment

Brand: Buyers Products

Buyers Aluminum Truck and Trailer Light Box - 3in. x 16in. x 3in.

$37.99

Heavy-duty diamond-tread aluminum with double oval opening. U.S.A. Application: Truck and Trailer Light Box, Finish Type: Polished Diamond Tread, Material: Aluminum, Box Shape: Rectangle, Opening Type: Oval, Opening Quantity: Double, Dimensions L x W x H (in.): 3 x 16 x 3 [Read more]

Store: Northern Tool and Equipment

Brand: Buyers Products

Buyers Steel Truck and Trailer Light Box - Triple Oval, Model LB3253

$59.99

Steel box has continuous welds for durability. Holds three 6 1/2in. standard oval lights. U.S.A. Application: Box for Standard 6 1/2 Inch Oval Lights (Horizontally), Finish Type: Black Powder Coat, Material: Steel, Box Shape: Rectangle, Opening Type: Oval, Opening Size L x H (in.): 6 1/2, Opening Quantity: Triple, Dimensions L x W x H (in.): 25 x 3 x 3 Designed for standard 6 1/2in. oval lights Model LB3253 [Read more]

Store: Northern Tool and Equipment

Brand: Buyers Products

Buyers Aluminum Truck and Trailer Light Box - 3in. x 8in. x 3in.

$27.98

Heavy-duty diamond-tread aluminum with single oval opening. U.S.A. Application: Truck and Trailer Light Box, Finish Type: Polished Diamond Tread, Material: Aluminum, Box Shape: Rectangle, Opening Type: Oval, Opening Size L x H (in.): 6 13/16 x 2 5/8, Opening Quantity: Single, Dimensions L x W x H (in.): 3 x 8 x 3 [Read more]

Store: Northern Tool and Equipment

Brand: Buyers Products

Buyers Aluminum Truck and Trailer Light Box - 6in. x 6in. x 3in.

$29.98

Heavy-duty diamond-tread aluminum with single round opening. U.S.A. Application: Truck and Trailer Light Box, Finish Type: Polished Diamond Tread, Material: Aluminum, Box Shape: Square, Opening Type: Round, Opening Size L x H (in.): 4 7/16, Opening Quantity: Single, Dimensions L x W x H (in.): 6 x 6 x 3 [Read more]

Store: Northern Tool and Equipment

Brand: Buyers Products

Buyers Steel Truck and Trailer Light Box - 3in. x 16in. x 3in.

$37.99

Black powder-coat steel with double oval opening. U.S.A. Application: Truck and Trailer Light Box, Finish Type: Black Powder Coat, Material: Steel, Box Shape: Rectangle, Opening Type: Oval, Opening Quantity: Double, Dimensions L x W x H (in.): 3 x 16 x 3 [Read more]

Store: Northern Tool and Equipment

Brand: Buyers Products

Buyers Steel Truck and Trailer Light Box - Triple Oval, Model LB3133

$54.99

Steel box has continuous welds for durability. Holds three 6 1/2in. standard oval lights in a vertical position. U.S.A. Application: Box for Standard 6 1/2 Inch Oval Lights (Vertically), Finish Type: Gray Primer Finish, Material: Steel, Box Shape: Rectangle, Opening Type: Oval, Opening Size L x H (in.): 6 1/2, Opening Quantity: Triple, Dimensions L x W x H (in.): 13 x 3 x 8 Designed for standard 6 1/2in. oval lights Model LB3133 [Read more]

Store: Northern Tool and Equipment

Brand: Buyers Products

Trux Accessories LED Truck Light - 6in. Oval, Amber

$11.98

This Trux Accessories LED truck light is designed to fit a standard 6in. oval grommet. Size (in.): 6, Shape: Oval, Color: Amber, LED Light: Yes, Compatible With: 6 Inch oval grommet, Lights Included (qty.): 1 Contains 13 diodes [Read more]

Store: Northern Tool and Equipment

Brand: Trux Accessories

Buyers Steel Truck and Trailer Light Box - 3in. x 8in. x 3in.

$27.98

Black powder-coat steel with single oval opening. U.S.A. Application: Truck and Trailer Light Box, Finish Type: Black Powder Coat, Material: Steel, Box Shape: Rectangle, Opening Type: Oval, Opening Size L x H (in.): 6 13/16 x 2 5/8, Opening Quantity: Single, Dimensions L x W x H (in.): 3 x 8 x 3 [Read more]

Store: Northern Tool and Equipment

Brand: Buyers Products

LUND EZ Bracket TrailRunner Mounting Kit for LUND Running Boards - 2001-03 Ford Super Crew and 1997-2000 Ford Light- Duty F-250 Pickup Trucks

$99.98

EZ bracket kit is required for complete installation of the LUND Trailrunner running board style. Kit contains all necessary hardware and instructions for truck installation. Heavy-duty solid U-channel steel construction. U.S.A. Bracket kit for installing Trailrunner running boards on 2001-03 Ford Super Crew and 1997-2000 Ford Light-Duty F-250 pickup trucks [Read more]

Store: Northern Tool and Equipment

Brand: Lund

Buyers Steel Truck and Trailer Light Box - Double Round, Model LB6123

$54.99

Steel box has continuous welds for durability. Holds two 4in. standard round lights. U.S.A. Application: Box for Standard 4 Inch Round Truck and Trailer Lights, Finish Type: Black Powder Coat, Material: Steel, Box Shape: Rectangle, Opening Type: Round, Opening Size L x H (in.): 4, Opening Quantity: Double, Dimensions L x W x H (in.): 12 x 3 x 6 Designed for standard 4in. round lights Model LB6123 [Read more]

Store: Northern Tool and Equipment

Brand: Buyers Products

Hauler Racks Universal Heavy-Duty Aluminum Truck Rack - Full-Size Extended & Crew Cab; Standard Cab, Model# T11U2863-1

$889.98

Heavy-duty Hauler II aluminum rack features 3 cross bars for maximum strength and durability. Heavy-duty support braces for optimum structural integrity. Bright dipped aluminum rack is anodized to prevent rust and corrosion. U.S.A. Chevy/GMC truck owners The Universal Aluminum Truck Rack requires Mounting Kit SPBKIT-1 for installation on your truck. This Kit is FREE with your order. Please call 1-800-221-0516 to order your Truck Rack and receive the Mounting Kit. Application: Truck rack, Capacity (lbs.): 1,200, Material Type: Aluminum, Finish Type: Anodized, Compatible With: Full-size extended & crew cab (6.5ft. bed) / standard cab (8ft. bed), Assembly Required: Yes Fits Full-size extended & crew cab (6.5ft. bed); standard cab (8ft. bed) [Read more]

Store: Northern Tool and Equipment

Brand: Hauler Racks

Northern Tool + Equipment Aluminum Storage Chest Truck Box - Diamond Plate, 36 3/4in.L x 24in.W x 18 1/2in.H

$299.98

This Northern Tool + Equipment aluminum truck chest storage box provides secure storage and protection for your tools and supplies. U.S.A. Dimensions: A=36 3/4in.; B=24in.; C=18 1/2in.; D=24in.; E=4in. Refers to image diagram above. Body Material: Aluminum, Body Finish: Tread Plate, Style: Wide, Offset Lid: Yes, Gas Struts: Yes, Lock Included: Yes, Dimensions L x W x H (in.): 36 3/4 x 24 x 18 1/2 Offset lid construction allows lid to open fully without back wall interference Flush mount/bright finish [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool

Hauler Racks Universal Heavy-Duty Aluminum Truck Rack - Full-Size Extended & Crew Cab, Model# T12U2863-1

$899.98

Heavy-duty Hauler II aluminum rack features 3 cross bars for maximum strength and durability. Heavy-duty support braces for optimum structural integrity. Bright dipped aluminum rack is anodized to prevent rust and corrosion. U.S.A. Chevy/GMC truck owners The Universal Aluminum Truck Rack requires Mounting Kit SPBKIT-1 for installation on your truck. This Kit is FREE with your order. Please call 1-800-221-0516 to order your Truck Rack and receive the Mounting Kit. Application: Truck rack, Capacity (lbs.): 1,200, Material Type: Aluminum, Finish Type: Anodized, Compatible With: Full-size extended & crew cab (8ft. bed), Assembly Required: Yes Fits Full-size extended & crew cab (8ft. bed) [Read more]

Store: Northern Tool and Equipment

Brand: Hauler Racks

LUND EZ Bracket TrailRunner Mounting Kit for LUND Running Boards - 2004-06 Ford F-150 Crew Cab Pickup Trucks

$99.98

EZ bracket kit is required for complete installation of the LUND Trailrunner running board style. Kit contains all necessary hardware and instructions for truck installation. Heavy-duty solid U-channel steel construction. U.S.A. Bracket kit for installing Trailrunner running boards on 2004-06 Ford F-150 Crew Cab pickup trucks [Read more]

Store: Northern Tool and Equipment

Brand: Lund

Northern Tool + Equipment Aluminum Wheel Well Storage Truck Box - Diamond Plate, 48 1/2in.L x 8 1/2in.W x 20 1/2in.H

$259.98

The Northern Tool + Equipment wheel well storage box provides extra storage without losing the space in your truck bed! Designed to fit in unused space around pickup wheel well either in front of or behind well. U.S.A. Dimensions: A=48 1/2in.; B=20 1/2in.; C=8 1/2in.; D=8 1/2in.; E=12in.; F=21in. Refers to image diagram above. Body Material: Aluminum, Body Finish: Tread plate, Dimensions L x W x H (in.): 48 1/2 x 8 1/2 x 20 1/2 Fits short beds Increases secure storage space in your truck bed Easy access to stored items Opens from the top and can be used on either side, in front of or behind the wheel well [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool