Shop-Vac Stainless Steel Wet/Dry Vacuum - 8-Gallon, 5.5 HP, Model# 5866100

$84.99

This heavy-duty Shop-Vac wet/dry vac features a stainless steel tank and a powerful 5.5 peak HP motor to handle just about any cleanup job, wet or dry. Easy-rolling casters provide increased stability while vacuuming. Convenient large top and side carrying handles for transport. Onboard cord wrap and tank wedge for structural integrity. Includes hose, 3 extension wands, 2 nozzles, crevice tool, filter and filter bag. U.S.A. Application: Wet / dry, Gallons: 8, Hose Length (ft.): 7, Hose Diameter (in.): 1 1/4, HP: 5.5, Tank Material: Stainless steel, Seal Pressure (in.): 59, CFM: 195, Power Cord (ft.): 12 Includes 7ft. hose, 3 extension wands, wet/dry nozzle, gulper nozzle, crevice tool, cartridge filter and disposable filter bag [Read more]

Store: Northern Tool

Brand: Shop-Vac

Oil Dri Spill Kit - 5 Gallon Bucket

$39.99

Place in area of plant or shop where spills may occur. Includes 5-gal. bucket, 2 general 4-ft. socks, 10 universal perforated pads and 1 disposable bag with twist tie. Can also be kept in a vehicle for spills at the job site. U.S.A. Application: Oil Dri, Gallons: 5, Socks: 2 4-ft socks, Pads Included (qty.): 10, Bags Included (qty.): 1 [Read more]

Store: Northern Tool

Brand: Oil-Dri

Shop Vac Heavy-Duty Portable Vac - 6 Gallon, 3 HP, Model# 9650610

$89.99

This Shop Vac® Heavy-Duty Portable Vac is easy-to-carry and fully featured. Includes a Lock-On® hose system, Ultra Web cartridge filters, a high-efficiency drywall disposable filter bag, a blow port for clearing ground surfaces and more. U.S.A. Application: Wet / dry, Gallons: 6, Hose Length (ft.): 8, Hose Diameter (in.): 1 1/4, HP: 3, Tank Material: Poly, Seal Pressure (in.): 57, CFM: 143, Power Cord (ft.): 12 Quiet operation On-board accessory storage Top carry handle Removable dolly [Read more]

Store: Northern Tool

Brand: Shop-Vac Right Stuff

Shop-Vac Stainless Steel Wet/Dry Vacuum - 5-Gallon, 4.5 HP, Model# 586600

$64.99

This heavy-duty Shop-Vac wet/dry vac features a stainless steel tank and a powerful 4.5 peak HP motor to handle just about any cleanup job, wet or dry. Easy-rolling casters provide increased stability while vacuuming. Convenient large top and side carrying handles for transport. Onboard cord wrap and tank wedge for structural integrity. Includes hose, 3 extension wands, 2 nozzles, crevice tool, filter and filter bag. U.S.A. Application: Wet / dry, Gallons: 5, Hose Length (ft.): 7, Hose Diameter (in.): 1 1/4, HP: 4.5, Tank Material: Stainless steel, Seal Pressure (in.): 57, CFM: 150, Power Cord (ft.): 6 Includes 7ft. hose, 3 extension wands, wet/dry nozzle, gulper nozzle, crevice tool, cartridge filter and disposable filter bag [Read more]

Store: Northern Tool

Brand: Shop-Vac

Skylink Universal Garage Door Opener System - Keyless Entry, Model# G6KR

$39.99

Wireless garage door opener system utilizes patented Smart Button™ technology which is compatible with all major brand garage door openers and offers easy, one-step installation, with no batteries or AC outlet required. Smart Button receives signal from remote control and opens/closes garage door. Keyless Entry: Yes, Remote Included: No, Works With: System works with up to 15 remote controls (additional remotes can be purchased separately), Batteries Required: Yes, Battery Included: Yes, Mounting Hardware Included: Yes, Weather Resistant: Yes, Includes: Backlit keypad with personal access codes Can operate up to 4 different garage doors Uses rolling code technology for top security No programming required After connection, your existing remote control will still function FCC/IC approved [Read more]

Store: Northern Tool

Brand: SkyLink

G-Floor Garage/Shop Floor Coverings - 7 1/2ft. x 17ft, Ribbed Design, Racing Blue, Model# GF717RB

$179.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Sturdy 100% PVC construction reduces dust and debris and withstands most contaminants found in garage or work environments. Durable non-slip coverings are easy to install, wont absorb oil or antifreeze and clean easily with soap and water. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 17 x 7 1/2, Material Type: PVC, Color: Racing Blue, Pattern Design: Ribbed Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

Libman Lobby Broom & Dust Pan Set, Model# 919

$19.99

This Libman lobby broom & dust pan set is always ready for quick clean-ups. Combo unit includes 12in. wide dust pan and lobby broom that stores inside pan and clips to handle. Unit is 36in. tall when open. Locks in upright position for easy storage. U.S.A. Application: Broom, Max. Width (in.): 12, Length (in.): 36, Material: Steel / resin / polymer fibers, Handle Length (in.): 36, Includes (qty.): 1 set [Read more]

Store: Northern Tool

Brand: Libman

G-Floor Garage/Shop Floor Coverings - 7 1/2ft. x 17ft, Coin Design, Racing Blue, Model# FG75CN717RB

$274.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 17 x 7 1/2, Material Type: PVC, Material Thickness (mils): 75, Color: Racing Blue, Pattern Design: Coin Sturdy 100% PVC, 75 mil thick construction reduces dust and debris and withstands most contaminants found in garage or work environments Durable non-slip coverings are easy to install Wont absorb oil or antifreeze Clean easily with soap and water Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Better Life Technology

Rockwell Jawhorse Work Table, Model# RK9204

$59.99

The Rockwell Jawhorse™ Work Table accessory converts the Jawhorse Work Station (Item# 253800; sold separately) or Jawhorse Sheetmaster (Item# 23049; sold separately) into a heavy-duty split-style work table. The table allows for handsfree clamping as the table halves are controlled using the foot pedal action of the Jawhorse. 220-lb. load capacity. Application: Converts Jawhorse into a heavy-duty split-style work table, Capacity (lbs.): 220, Dimensions L x W x H (in.): 24 x 14, Works With: 253800, 23049 Table accommodates uneven pieces up to a 13° offset Pivoting surface clamps, or "dogs," hold irregularly shaped objects tightly for painting, sanding, scraping or other work Table measures 24in. x 14in Maximum opening between table halves is 22in. [Read more]

Store: Northern Tool

Brand: Rockwell

Northern Industrial Roller Stand with Rolling Balls

$19.99

Roller stand features a chrome-plated 11in.L x 1 5/6in. diameter steel roller topped with 8 rolling balls. Ideal when you need additional guidance for long workpieces like pipes or wood planking. Roller Size (in.): 1 5/6, Height Range (in.): 27 1/2 - 42 1/2, Material: Steel, Application: Long pipes or wood [Read more]

Store: Northern Tool

Brand: Northern Industrial Tools

Rolling Garden Seat with Turnbar

$59.99  $54.99

This comfortable rolling seat helps make your gardening easy, eliminating the back pressure, pain and stress caused by continuous squatting, stooping, kneeling and other repetitive movements. You sit on an old-fashioned tractor-style seat that is adjustable up to 18in.H and swivels in any direction. Adjustable: Yes, Capacity (lbs.): 300, Height Range (in.): 18, Dimensions W x H (in.): 10 1/4 x 18 3/4, Material: Steel, Wheel Type: Pneumatic, Wheel Size (in.): 10, Includes: Storage area [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

Shop Vac Stainless Steel Wet/Dry Vacuum - 10-Gallon Capacity, 6.5 HP, Model# 9625510

$179.99

This Shop Vac® Stainless Steel Wet/Dry Vacuum has a large 10-gal. stainless steel tank with 6.5 HP motor, 60in. SP and 195 CFM. Includes 1 1/2in. x 12ft. economy Lock-On® hose, two 1 1/2in. extension wands, 14in. floor nozzle, claw nozzle, blow-molded crevice tool and 18ft. cord. U.S.A. Application: Wet / dry, Gallons: 16, HP: 6 1/2, Tank Material: Poly, Seal Pressure (in.): 60, CFM: 195, Power Cord (ft.): 18 Ultra-Web® cartridge filter High-efficiency drywall collection filter bag Accessory storage basket Blower port [Read more]

Store: Northern Tool

Brand: Shop-Vac

Meguiars Headlight Restoration Kit, Model# G1900K

$24.99

Meguiars Headlight Restoration Kit safely restores clarity to cloudy, oxidized, yellowed and lightly scratched headlights and other clear plastics. Uses PlastX and a Buffing Pad Drill adapter which is included along with a microfiber towel. U.S.A. Application: Automotive [Read more]

Store: Northern Tool

Brand: Meguiars

Libman Telescoping Window Washer, Model# 188

$24.99

This handy telescoping window washer with aluminum handle extends to 8 feet to clean windows with its 10in. wide scrub net and sponge head. Flip over head to use the 10in. rubber blade to wipe windows without streaking. Built-in hanger tip for storage. U.S.A. Application: Squeegee & washer, Max. Width (in.): 9 7/8, Length (in.): 47 1/2, Material: Aluminum / rubber / sponge, Handle Length (in.): 96, Includes (qty.): 1 [Read more]

Store: Northern Tool

Brand: Libman

Refurbished Rug Doctor Mighty Pro - 3.1-Gallon Tank, Model# MP-C2C

$499.99  $399.00

Save a dirty, grimy old carpet with the professional-grade Rug Doctor Mighty Pro carpet cleaner. This combination steam cleaner, upholstery cleaner and vacuum gives you a deep clean in only one pass, thanks to a strong vacuum motor, an exclusive vibrating brush and a high-pressure pump. This cleaning product is factory reconditioned to perform like new. NorthernTool.com offers reconditioned tools and equipment that meet the same standards and quality as new products, yet give you identical features at considerable savings. Application: Carpet cleaner, Gallons: 3.1, Hose Length (ft.): 12 Includes the Rug Doctor Universal Hand Tool at the end of a 12ft.L hose, perfect for staircases, car interiors and other tight spaces 10.4in.W vacuum path [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

Oil Dri Oil Absorbent Pads - 16in. x 20in. Size

$44.99

Convenient dispenser box of 100 pads can be located anywhere spills may occur. Absorb most petroleum-based fluids. Keep in vehicle for cleaning oil spills and more. U.S.A. Application: Oil Dri, Pads Included (qty.): 100 [Read more]

Store: Northern Tool

Brand: Oil-Dri

Master Magnetics Ceramic Disc Magnets - 6-Pc. Set, Model# 07004

$2.99

6-pc. ceramic disc magnet set. Each measures 1in. dia. x 5/32in. thick. Also known as ferrite magnets, these powerful discs are idea for medium-weight projects. They are made from the highest grade of ceramic magnet material available, giving them unbeatable pull strength, and are ideal for all types of projects around the house, office, shop or garage. These magnets are highly resistant to demagnetization, and have excellent resistance to corrosion. Product Style: Holding magnet, Material: Ceramic, Thickness (in.): 5/32, Diameter (in.): 1 [Read more]

Store: Northern Tool

Brand: Magnet Source

Grip-On Tools Magnetic Tool Holders - 3-Pc. Set

$14.99

The Grip-On tool holders feature powerful magnets to hold tools and other ferrous objects in place. Keeps tools off the floor and available for use. In 8in, 12in. and 18in. sizes. Includes installation hardware. Product Style: Holding magnet, Height (in.): 8, 12, and 18 [Read more]

Store: Northern Tool

Brand: Grip On

G-Floor Van/Trailer Floor Coverings - 9ft. x 44ft, Diamond Design, Slate Gray, Model# GF85DT944SG

$899.99

Heavy-duty G-Floor van/trailer floor coverings are designed to cover an entire trailer deck without a seam and are suitable for a wide variety of commercial, industrial and agricultural applications. Super durable 85 mil thickness with 100% PVC construction makes these coverings easy to install and clean. U.S.A. Dimensions L x W (ft.): 44 x 9, Material Type: PVC, Material Thickness (mils): 85, Color: Slate Gray, Pattern Design: Diamond Protects against stains and spills Durable, heavy-grade PVC construction Easily trims for a custom fit Design channels debris and avoids tracking Cleans easily with soap and water Provides cushioning and anti-fatigue benefits [Read more]

Store: Northern Tool

Brand: Better Life Technology

Gorilla Glue - 4 Ounce

$5.98

The strongest glue on the planet Earth! All-purpose waterproof glue can be used indoors or out. Bonds to wood, stone, metal, ceramic and more. Capacity (oz.): 4 ( glue ), Includes (qty.): 1 Container, Works With: Many items [Read more]

Store: Northern Tool

Brand: Gorilla Glue

G-Floor Garage/Shop Floor Coverings - 10ft. x 22ft, Ribbed Design, Slate Gray, Model# GF55RB1022SG

$299.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 10 x 22, Material Type: PVC, Color: Slate Gray, Pattern Design: Ribbed Sturdy 100% PVC, 55 mil thick construction reduces dust and debris and withstands most contaminants found in garage or work environments Durable non-slip coverings are easy to install Wont absorb oil or antifreeze Clean easily with soap and water Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Better Life Technology

Better Life Technologies G-Floor Peel and Stick Tiles - 2Ft.L x 2Ft.W, Black, 10-Pack, Model# T95DT24MB10P3

$149.99

This versatile G-Floor tile virtually seals your garage or workshop floor from moisture and contaminants, while reducing the amount of dirt tracked into your home and cushioning the floor. Rugged polyvinyl construction features ultimate diamond tread appearance. In Black. U.S.A. Dimensions L x W (ft.): 2 x 2, Material Type: Polyvinyl, Material Thickness (in.): .095, Material Thickness (mils): 95, Color: Midnight Black, Pattern Design: Diamond Tread, Tile Size (in.): 24 x 24 Prevents concrete floor damage Non-porous surface Easy to clean Reduces noise [Read more]

Store: Northern Tool

Brand: Better Life Technology

Torin Big Red Heavy-Duty Shop Seat with Cup Holder, Model# TR6340

$49.99

The Torin heavy-duty shop seat with cup holder features a chrome-plated steel frame with a high-density foam seat. Capacity (lbs.): 400, Height Range (in.): 17 11/16, Dimensions W x H (in.): 16 1/8 x 17 11/16, Material: Chrome plated steel frame with high density foam seat, Caster Type: Swivel, Caster Size (in.): 3, Includes: Cup holder, storage tray [Read more]

Store: Northern Tool

Brand: Torin Big Red

Master Magnetics Handi Hook - 20-Lb. Capacity, Model# 07218

$3.99

Handi Hook - 20-lb. pull. 2in. dia. A powerful ceramic magnet encased in a nickel plated steel housing with a J-hook. Includes a liner to prevent surface scratches. Hang a drop light underneath an auto hood, plus keys, tools and utensils from any ferrous metal surface. Approx. 20-lb. pull on a horizontal surface. Highly resistant to heat. Permanent magnetism guaranteed. Product Style: Holding magnet, Material: Ceramic magnet encased in a nickel plated steel house, Pulling Power (lbs.): 20, Diameter (in.): 2 [Read more]

Store: Northern Tool

Brand: Magnet Source

Master Magnetics Round Base Magnet - 65-Lb. Capacity, Model# 07222

$6.98

Round base magnet - 65-lb. pull. 2 2/3in. dia. x 3/8in. thick with 1/4in. hole. This magnetic base has a powerful ceramic ring magnet encased in a durable nickel-plated cup with a mounting hole in the center. The extra strong magnet will hold up to 65 pounds and can suspend heavy items such as speakers and spotlights. Under normal use, permanent magnetism guaranteed. Highly resistant to heat. Product Style: Holding magnet, Material: Ceramic ring, Pulling Power (lbs.): 65, Thickness (in.): 3/8, Diameter (in.): 2 2/3 [Read more]

Store: Northern Tool

Brand: Magnet Source

G-Floor Garage/Shop Floor Coverings - 7 1/2ft. x 17ft, Coin Design, Midnight Black, Model# GF75CN717MB

$274.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 17 x 7 1/2, Material Type: PVC, Material Thickness (mils): 75, Color: Midnight Black, Pattern Design: Coin Sturdy 100% PVC, 75 mil thick construction reduces dust and debris and withstands most contaminants found in garage or work environments Durable non-slip coverings are easy to install Wont absorb oil or antifreeze Clean easily with soap and water Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Better Life Technology

Master Magnetics Ceramic Block Magnets - 2-Pc. Set, Model# 07044

$2.98

2-pc. ceramic block magnet set. Each measures 1 7/8in.L x 7/8in.W x 3/8in. thick. Also known as a ferrite magnet, this powerful magnet can be used to hang polaroids of projects in process on the lip of a metal shelf above a workbench, or to pin blueprints onto the side or hood of a vehicle. These magnets are highly resistant to demagnetization, and have excellent resistance to corrosion. Product Style: Holding magnet, Material: Ceramic, Thickness (in.): 3/8, Dimensions L x W (in.): 1 7/8 x 7/8 [Read more]

Store: Northern Tool

Brand: Magnet Source

Grip-On Tools Magnetic Pickup Tool - 5-Lb. Capacity

$5.00

Telescoping tool has a 5-lb. capacity. Product Style: Retrieving magnet, Pulling Power (lbs.): 5 [Read more]

Store: Northern Tool

Brand: Grip On

Tennsco 60in. x 30in. Workbench Side/Backstop Rail, Model SB-3060MG

$39.99

The Tennsco 60in. x 30in. Workbench Side/Backstop Rail is 3in. high to keep items from rolling off ends and back. For use with Tennsco 60in. workbench, sold separately. U.S.A. Material: Steel, Dimensions W x D x H (in.): 60 x 30 x 3 side/back rail, Includes: 3 rail pieces for 60in. workbench Made of 16-gauge steel 3in. high rail [Read more]

Store: Northern Tool

Brand: Tennsco

Torin Shop Stool - Black Top, 28in.H, Model# TR6185-1

$34.99

The Torin black top shop stool is great for shop, home or garage use. Classic design features chrome-plated legs and a cushioned seat that swivels for easy use. Adjustable: No, Dimensions W x H (in.): 20 x 28, Material: Vinyl seat, chrome-plated legs, Wheel Type: None 14 1/2in. diameter seat Comfortable 3in. cushion Protective floor caps Swivels 360° on ball bearings Clear coating for added durability Easy assembly [Read more]

Store: Northern Tool

Brand: Torin Big Red

PikStik Pro 32in. Reacher/Grabber - Model# P-321

$24.98

The PikStik Pro 32in. reacher/grabber is in a class of its own! The reacher preferred by professionals is a multipurpose reacher designed for all uses. Patented design is strong, lightweight and safe. Made of durable thermoplastic resin, the textured tips provide nonslip gripping for all surfaces. Patented jaws rotate 360° to pick up objects from any angle. Wide 5 1/2in. jaws pick up larger objects. Designed for ultimate safety with no sharp edges to pinch fingers. Multi-flex dimple design on overmold provides no-slip gripping from any angle. Pentagon jaws allow larger objects to be moved safely. One-piece molded jaw housing will never separate. Dual vault channel design provides extreme shaft strength. Handle locking mechanism saves hands and fingers from strain. Patented trigger multiplies gripping strength. Application: Reach extender, Max. Width (in.): 5 1/2, Length (in.): 32, Material: Thermoplastic resin [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

Vacmaster Professional Wet/Dry Vac - 14-Gallon, 6.5 HP, Model# VJ1412P

$129.99

This big, tough feature-packed Vacmaster professional 14-gallon wet/dry unit with a powerful 6.5 peak HP motor can handle the toughest cleanup jobs with ease. Large rear wheels with foam grip push/pull handle make it easy to maneuver anywhere. Vac has extra-large drain for quick disposal. Comes with onboard storage to keep all accessories handy. Item is on backorder until Ausut 31st. Application: Wet / dry, Gallons: 14, Hose Length (ft.): 10, Hose Diameter (in.): 2 1/2, HP: 6.5, Tank Material: Polypropylene, Power Cord (ft.): 18 Large dust-sealed on/off switch Long 18-ft. power cord for extra reach Includes 2 1/2in. x 10ft. crushproof hose, 2 extension wands, fine dust cartridge filter, contour air control handle, accessory bag, 14in. squeegee nozzle, 14in. floor brush, crevice tool, 8in. utility nozzle and air/noise diffuser [Read more]

Store: Northern Tool

Brand: VacMaster

Shop-Vac Industrial Back Pack Vacuum - 7 Quart, 2.0 HP, Model# 285-00-10

$489.99

The Shop-Vac Industrial Back Pack vacuum features a long-life 2.0 HP motor and a comfortable, adjustable backpack harness system. Lightweight design allows user to tackle large areas with minimum effort and clean the toughest hard-to-reach spots. For use with dry pick-up only. U.S.A. Application: Dry, Gallons: 1 3/4, Hose Length (ft.): 5, HP: 2, Power Cord (ft.): 50 7 quart capacity Super quiet sound level 1.5in. dia. lock-on hose Convenient tool belt Two ergonomic aluminum wands Includes adjustable floor nozzle, gulper nozzle, crevice tool and round brush Use for dry pick-up only [Read more]

Store: Northern Tool

Brand: Shop-Vac

US Stove Ash Vacuum - 6.5 Gallon Capacity, Model# AV15

$129.99

This US Stove Ash Vacuum has a powerful 2 HP motor and big 6.5-gallon capacity to make ash cleanups in fireplaces, wood stoves or pellet stoves quick and easy. Application: Ash, Gallons: 6 1/2, Hose Length (ft.): 3 1/4, HP: 2, Tank Material: Steel, Power Cord (ft.): 8 Safe for warm or cold ashes 39in. suction hose with aluminum wand 3-layer fine dust filter with mesh cage keeps ash in canister Plastic crevice tool for deep cleaning Darcon prefilter bag Integrated cord and hose storage [Read more]

Store: Northern Tool

Brand: US Stove Company

Namco Scooter Jr. Carpet Cleaner, Model# 4108

$1,299.99

One of the best carpet cleaners in the market! Cleans deep-down dirt and refreshes carpet. Loaded with features, this is the one for you. Application: Carpet cleaner, Gallons: 12, Hose Length (ft.): 50, Max. PSI: 100, Dimensions W x H (in.): 16 x 40 1/2 2-stage motor 12in. steel and aluminum floor wand 160in. water lift 12-gal. waste tank U.S.A. [Read more]

Store: Northern Tool

Brand: Mco

NoTrax Diamond Top Interlock Floor Mat - 28in. x 31in. Single, Black, Model# 545S2831BL

$39.99

NoTrax® Diamond Top Interlock™ Floor Mat has solid rubber construction formed with a diamond deckplate pattern on top surface. A sturdy waffle support system on underside achieves maximum safety and comfort for workers. Overall thickness is 1/2in. Dimensions L x W (ft.): 2 1/2 x 2 1/3, Material Type: Rubber, Material Thickness (in.): 1/2, Color: Black, Pattern Design: Diamond plate A single work station mat with beveled borders on all 4 sides [Read more]

Store: Northern Tool

Brand: NoTrax

G-Floor Garage/Shop Floor Coverings - 10ft. x 22ft, Ribbed Design, Forest Green, Model# FG55RB1022FG

$299.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 22 x 10, Material Type: PVC, Color: Forest Green, Pattern Design: Ribbed Sturdy 100% PVC, 55 mil thick construction reduces dust and debris and withstands most contaminants found in garage or work environments Durable non-slip coverings are easy to install Wont absorb oil or antifreeze Clean easily with soap and water Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Better Life Technology

UST Hair Pins - 150-Pc. Set, Model# W5210

$9.99

Contains 6 most popular sizes of hair pins in a handy storage case. 3/32in. x 1 3/16in, 5/64in. x 1 5/16in, 5/64in. x 1 9/16in, 7/64in. x 1 5/8in, 9/64in. x 1 3/4in, 5/32in. x 2 15/16in. sizes Resealable plastic case [Read more]

Store: Northern Tool

Brand: UST

Master Magnetics Magnetic Push Pins - 6-Pc. Set, Model# 07507

$8.98

6-pc. red, white and blue magnetic push pins. 5/8in.D x 5/8in.H. Powerful neodymium magnets encased in colorful plastic shapes are useful for posting memos, invoices and photos. Package contains 2 red circles, 2 blue squares, and 2 white triangles. Product Style: Holding magnet, Material: Neodymium, Diameter (in.): 5/8 [Read more]

Store: Northern Tool

Brand: Magnet Source

Grip On Magnetic Parts Tray Set - 3-Pc, Model# 67456

$21.99

Use the Grip On Magnetic Parts Tray Set to keep parts and tools from being misplaced or lost while working in the garage or workshop. Magnetic trays prevent items from rolling or sliding and can be used at any angle. Polished stainless steel resists rust and corrosion. Includes 9 1/2in. x 10in, 4in. round and mini trays. Product Style: Holding magnet, Material: Stainless steel [Read more]

Store: Northern Tool

Brand: Grip On

Red (Duct) Tape - 2in. x 60 Yard Length

$7.99

Versatile duct tape has dozens of uses. Polyethylene-coated adhesive cloth tape. 2in. W x 60 yard roll. U.S.A. Tape Type: Duct tape, Length (ft.): 180, Max. Width (in.): 2, Material: Polyethylene coated adhesive cloth, Includes (qty.): 1 [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

Vestil Variable Height V-Roller Stand - 1760-Lb. Capacity, 33-43in.H Range, Model# STAND-G-V-HR

$229.99

This rolling stand is designed for use in front of saws, sheers and other machinery. U.S.A. Capacity (lbs.): 1,760, Roller Size (in.): 5, Height Range (in.): 33 - 43, Material: Chrome-plated rollers and Cast steel base, Application: Designed for use in front of saws, sheers and other machinery Foot-operated gas cylinder lifts rollers to desired height when empty Manual locking collar [Read more]

Store: Northern Tool

Brand: Vestil

Master Magnetics Round Base Magnet - 15-Lb. Capacity, Model# 07216

$2.98

Round base magnet - 15-lb. pull 1 7/16in. dia. x 1/4in. thick with a 3/16in. hole. This magnetic base has a powerful ceramic ring magnet encased in a durable nickel-plated cup with a mounting hole in the center. Add a hook or knob and this magnet is perfect for holding wiring or cords in place. It will hold up to 15 pounds. Highly resistant to heat. Under normal use, permanent magnetism guaranteed. NOTE: Pounds pull is rated by vertical test on 3/8in. thick ground steel plate. Pounds pull rating will be reduced if the item you wish to lift is thinner, painted, or an uneven surface. Product Style: Holding magnet, Material: Ceramic ring encased in durable nickel plated cup, Pulling Power (lbs.): 15, Thickness (in.): 1/4, Diameter (in.): 1 7/16 [Read more]

Store: Northern Tool

Brand: Magnet Source

HTC "V" Roller Support - Super Duty

$149.99

Super-duty "V" roller support is designed to capture round or unusually shaped items which require infeed/outfeed support. Features 2 adjustable 1 1/4in roller balls that will also support flat stock when used in top position. Has a 500-lb. capacity and 4 nonskid leveling feet. Adjusts from 28in. to 44in. high. Capacity (lbs.): 500, Roller Size (in.): 1 1/4, Height Range (in.): 28 - 44, Application: Round or unsual shapes "V" roller support for handling round or unusually shaped items 2 adjustable 1 1/4in roller balls 4 nonskid leveling feet Limited lifetime warranty Model HVR-18 [Read more]

Store: Northern Tool

Brand: HTC

ShelterLogic Quick Cover PVC Garage Floor Mat - 18ft.L x 8ft.W, Model# 16000

$299.99

This ShelterLogic Quick Cover™ PVC Garage Floor Mat is an innovative portable coverage solution for garage or workshop floors. It is designed to protect floors from snow buildup, oil or fluid stains, dirt and debris. In Black. U.S.A. Dimensions L x W (ft.): 18 x 8, Material Type: PVC, Material Thickness (in.): 1, Material Thickness (mils): 21, Color: Black, Pattern Design: Solid Features rip stop tough, ultra-duty PVC fabric with watertight, reinforced heat welded seams 1in. raised edge with high-density foam insert to contain spills [Read more]

Store: Northern Tool

Brand: ShelterLogic

Northern Industrial Tools Cable Ties - 11in. Size, 100-Pk.

$5.99

Nylon cable ties in a pack of 100. Each is 11in. long in white. Great for hundreds of uses, including electrical, home, garden, auto and marine. Length (in.): 11, Pieces (qty.): 100, Material: Nylon, Dimensions L (in.) x W (mm): 11 x .187 Tensile Strength: 50 lb. [Read more]

Store: Northern Tool

Brand: Northern Industrial Tools

Northern Industrial Mechanical Elevating Table - 2,200 Lb. Capacity, 36in. x 24in. x 23 1/2in. Size

$399.99

Northern Industrial 36 in.L x 24in.W mechanical elevating table has 24 1/8in. minimum lift and 42 1/8in. maximum lift. Maximum weight capacity 2,200 lbs. 5 in. dia. wheels allow for easy manueverability. Capacity (lbs.): 2,200, Dimensions L x W x H (in.): 36 x 24 x 23 1/2, Wheel Size (in.): 5 Features a mechanical hand crank for precise height adjustment Steel construction Powder-coat finish Table raises or lowers as handle actuates mechanism which simultaneously turns four screw posts Features foot-operated floor lock 36 in.L x 24in.W table has 24 1/8in. minimum lift and 42 1/8in. maximum lift 2,200-lb. maximum weight capacity Four 5 in. wheels with iron core (2 rigid, 2 swivel) [Read more]

Store: Northern Tool

Brand: Northern Industrial Tools

2x4 Basics Workbench Kit, Model# 90158

$64.99

Use the 2x4 Basics Workbench Kit to make a custom workbench to fit anywhere you need a work surface or a storage area. Simply add 2x4s and plywood or particleboard to these leg supports to create a workbench 36in. tall in any length or width up to 8 x 4. U.S.A. Capacity (lbs.): 1,000 per shelf, Material: Heavy gauge resin, Includes: Hardware Only straight 90° cuts are required - no miters or angles Simple assembly with power screwdriver and saw Lumber not included [Read more]

Store: Northern Tool

Brand: Blitz

G-Floor Garage/Shop Floor Coverings - 10ft. x 24ft, Coin Design, Racing Blue, Model# FG75CN1024RB

$519.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 24 x 10, Material Type: PVC, Material Thickness (mils): 75, Color: Racing Blue, Pattern Design: Coin Sturdy 100% PVC, 75 mil thick construction reduces dust and debris and withstands most contaminants found in garage or work environments Durable non-slip coverings are easy to install Wont absorb oil or antifreeze Clean easily with soap and water Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Better Life Technology

Tennsco Adjustable Workbench - Wood Top, 60in.W x 30in.D, Model# WBA-1-3060WMG

$369.99

The Tennsco Adjustable Wood Top Workbench features 6 1/2in. of height adjustment (in 1 1/2in. increments) to provide working comfort for many different users. Heavy-duty hard maple laminated wood features butcher block construction to resist warping and can hold 150 lbs. per sq. ft. of evenly distributed weight. U.S.A. Capacity (lbs.): 150 / sq. ft, Material: Steel frame & legs, Wood top, Top Material: Maple laminated butcher block, Dimensions W x D x H (in.): 60 x 30 x 33 1/4, Finish Type: Electrostatic enamel, Includes: Adjustable legs Legs are welded from 13-gauge steel with 14-gauge lower cross members You can adjust leg height from 27 7/8in. to 35 3/8in. on 1 1/2in. increments Hard maple laminated butcher block top Stringers are 14-gauge steel formed into 5 5/16in. channel [Read more]

Store: Northern Tool

Brand: Tennsco

Little Giant Welded Steel Workbench - 60in.W x 30in.D x 36in.H

$299.99

Smooth 12-gauge steel top is reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Lower half-shelf with lip at rear provides room for additional storage while leaving ample room for legs when seated. Truck ship. U.S.A. Capacity (lbs.): 4,500, Material: Steel and angle iron, Top Material: 12 gauge steel, Dimensions W x D x H (in.): 60 x 30 x 36, Finish Type: Powder-coat 500-lb. capacity on lower shelf Legs and lower braces are 1 1/2in. x 1 1/2in. x 3/16in. thick angle iron Legs have 2in. square footpads with 9/16in. hole for mounting to the floor All-welded unit ships fully assembled and ready for immediate use Truck ship U.S.A. [Read more]

Store: Northern Tool

Brand: Little Giant Hand Truck

Work Table/ Cart - 200-Lb. Capacity

$69.99

Convenient table/cart with adjustable tabletop features trays and slots to hold tools. Height adjusts from 33in. to 48in. Main support post is 2in. diameter 10 gauge steel. Bench swivels 360°. 4 swivel casters provide maneuverability. Tray is 29 1/8in. L x 19in. W x 1in. D and is constructed of durable steel. Capacity (lbs.): 200, Dimensions L x W x H (in.): 29 18 x 19 x 1, Wheel Type: Swivel casters, Material: 10 gauge steel Lower Height: 33in. Raised Height: 48in. Main Support Post is 2in. I.D. and 10 Gauge Steel [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

Triton Products Magnetic Impact Wrench Holder - Model# 72451

$16.99

This Triton Products magnetic impact wrench holder attaches to your toolbox to hold your impact wrench, including pistol-type wrenches. Product Style: Holding magnet, Pulling Power (lbs.): 20, Height (in.): 4 1/2, Dimensions L x W (in.): 2 x 3 Special gap design allows organization of air hoses [Read more]

Store: Northern Tool

Brand: Triton Products

Torin Big Red Shop Stool - Checkered Flag Design, Item# TR6185C

$34.99

The Torin Big Red shop stool with classic checkered flag design is ideal for the shop, garage or home. Single, Pair, or Set: Single, Height (in.): 28, Dimensions W x H (in.): 20 x 28, Pattern Design: Checkered flag, Material Type: Vinyl and chrome plated steel Large 14 1/2in. dia. seat that swivels 360° Includes four legs with protective caps and footrest Easy assembly [Read more]

Store: Northern Tool

Brand: Torin Big Red

Lifting Magnet - 600-Lb. Capacity

$599.99

This lifting magnet eliminates the need for dangerous straps and slings. U.S.A. Product Style: Lifting magnet, Material: Steel, Pulling Power (lbs.): 600, Height (in.): 4, Dimensions L x W (in.): 7 x 4 Quickly moves large pieces of steel and improves safety Requires no electricity Perfect for loading and unloading workpieces [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

G-Floor Garage/Shop Floor Coverings - 7 1/2ft. x 17ft, Diamond Design, Slate Gray, Model# GF75DT717SG

$274.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 17 x 7 1/2, Material Type: PVC, Material Thickness (mils): 75, Color: Slate Gray, Pattern Design: Diamond-plate Sturdy 100% PVC, 75 mil thick construction reduces dust and debris and withstands most contaminants found in garage or work environments Durable non-slip coverings are easy to install Wont absorb oil or antifreeze Clean easily with soap and water Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Better Life Technology

UST Spring Assortment - 200-Pc. Set, Model# W5200

$9.99

Contains 20 popular sizes of compression and extension type springs. Resealable plastic case. [Read more]

Store: Northern Tool

Brand: UST

Northern Industrial Tools Cable Ties - 5in. Size, 100-Pk.

$2.99

Nylon cable ties in a pack of 100. Each is 5in. long in white. Great for hundreds of uses, including electrical, home, garden, auto and marine. Length (in.): 5, Pieces (qty.): 100, Material: Nylon [Read more]

Store: Northern Tool

Brand: Northern Industrial Tools

24in. x 48in. 1,000-Lb. Capacity Mobile Work Table

$269.99

All welded steel construction means years of rugged service and no assembly. Has 2 shelves for additional storage or transport capacity. 34in. high with 4 swivel casters and 5in. non-marking polyurethane wheels with ball bearings. Truck ship. U.S.A. Capacity (lbs.): 1,000, Material: Galvanized steel, Top Material: Galvanized steel, Dimensions W x D x H (in.): 48 x 24 x 34, Caster Size (in.): 5, Caster Type: 4 swivel non-marking polyurethane wheels with ball bearings [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

G-Floor Garage/Shop Floor Coverings - 9ft. x 20ft, Ribbed Design, Brick Red, Model# GF920BR

$249.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Sturdy 100% PVC construction reduces dust and debris and withstands most contaminants found in garage or work environments. Durable non-slip coverings are easy to install, wont absorb oil or antifreeze and clean easily with soap and water. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 20 x 9, Material Type: PVC, Color: Brick Red, Pattern Design: Ribbed Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

G-Floor Garage/Shop Floor Coverings - 8ft. x 22ft, Coin Design, Racing Blue, Model# GF75CN822RB

$379.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 22 x 8, Material Type: PVC, Material Thickness (mils): 75, Color: Racing Blue, Pattern Design: Coin Sturdy 100% PVC, 75 mil thick construction reduces dust and debris and withstands most contaminants found in garage or work environments Durable non-slip coverings are easy to install Wont absorb oil or antifreeze Clean easily with soap and water Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Better Life Technology

National Public Seating Adjustable Shop Stool - 300-Lb. Capacity, 25-33in.H, Model# 6224H

$44.99

This National Public Seating Adjustable Shop Stool is built ruggedly for years of use. It features a heavy-duty 18-gauge steel frame, riveted masonite board seat to resist warping and a welded foot ring. Adjusts in height from 25-33in.H for maximum comfort. Adjustable: Yes, Capacity (lbs.): 300, Height Range (in.): 25 -33, Material: Steel [Read more]

Store: Northern Tool

Brand: Tional Public Seating

Tennsco Mobile Workbench - 42in.W x 25in.D x 36 1/4in.H, 4 Drawers, Model# MB-1-2542MG

$699.99

The Tennsco Mobile Workbench is designed to move heavy parts and tools to the workers worksite. Helps keep employees organized anywhere in the plant. Manufactured with all-welded construction using heavy-gauge steel. Features locking cabinet with shelf, 5in. casters, a 20-gauge steel body, 16-gauge top and 20-gauge doors. U.S.A. Capacity (lbs.): 240 (caster), Material: Steel, Top Material: 16-gauge steel, Dimensions W x D x H (in.): 42 x 25 x 36 1/4, Drawers (qty.): 4, Cabinet (qty.): 1, Caster Size (in.): 5, Caster Type: Polyolefin, Finish Type: Powder-coat, Includes: Locking cabinet Locking cabinet with shelf 4 drawers with locks 20-gauge wraparound 1-pc. steel body construction eliminates sharp edges 16-gauge steel top with 18-gauge welded hat channel for added support 20-gauge steel doors with a 24-gauge stiffener for added strength 14-gauge steel mobile base and handle Four 5in. polyolefin casters (2 fixed, 2 swivel) 240-lb. caster capacity [Read more]

Store: Northern Tool

Brand: Tennsco

G-Floor Garage/Shop Floor Coverings - 7 1/2ft. x 20ft, Ribbed Design, Midnight Black, Model# GF720MB

$199.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Sturdy 100% PVC construction reduces dust and debris and withstands most contaminants found in garage or work environments. Durable non-slip coverings are easy to install, wont absorb oil or antifreeze and clean easily with soap and water. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 20 x 7 1/2, Material Type: PVC, Color: Midnight Black, Pattern Design: Ribbed Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

Northern Industrial Tools Cable Ties - 14in. Size, 100-Pk.

$8.99

UV resistant makes them ideal for use outdoors. Length (in.): 14, Pieces (qty.): 100, Dimensions L (in.) x W (mm): 14 x 4.8 [Read more]

Store: Northern Tool

Brand: Northern Industrial Tools

The Crawler King Crawler Monster (Rolling) Seat

$159.99

Monster tractor mechanics seat has five 5in. high-performance solid rubber swivel casters with axle bearings that take you anywhere, over any surface. Low-back cushioned seat offers extended comfort. Easy lever action raises and lowers seat up to a 5in. rise. Floor to seat is 20 3/4in. in lowest position. 19in. dia. tray holds tools and parts. 350-lb. capacity seat works great around gravel, cords, hoses, etc. Some assembly required. Adjustable: Yes, Capacity (lbs.): 350, Height Range (in.): 20 3/4 - 25 3/4, Dimensions W x H (in.): 19 x 25 3/4, Caster Type: Swivel, Caster Material: Solid rubber, Caster Size (in.): 5, Includes: Tool tray [Read more]

Store: Northern Tool

Brand: The Crawler

G-Floor Van/Trailer Floor Coverings - 9ft. x 44ft, Coin Design, Slate Gray, Model# GF85CN944SG

$899.99

Heavy-duty G-Floor van/trailer floor coverings are designed to cover an entire trailer deck without a seam and are suitable for a wide variety of commercial, industrial and agricultural applications. Super durable 85 mil thickness with 100% PVC construction makes these coverings easy to install and clean. U.S.A. Dimensions L x W (ft.): 44 x 9, Material Type: PVC, Material Thickness (mils): 85, Color: Slate Gray, Pattern Design: Coin Protects against stains and spills Installs without adhesives Easily trims for a custom fit Design channels debris and avoids tracking Cleans easily with soap and water Provides cushioning and anti-fatigue benefits [Read more]

Store: Northern Tool

Brand: Better Life Technology

G-Floor Garage/Shop Floor Coverings - 7 1/2ft. x 17ft, Ribbed Design, Sandstone, Model# GF717SA

$179.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Sturdy 100% PVC construction reduces dust and debris and withstands most contaminants found in garage or work environments. Durable non-slip coverings are easy to install, wont absorb oil or antifreeze and clean easily with soap and water. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 17 x 7 1/2, Material Type: PVC, Color: Sandstone, Pattern Design: Ribbed Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

Master Magnetics Black Heavy-Duty Holding/Retrieving Magnet - 150-Lb. Capacity, Model# 07208

$19.99

Black heavy-duty retrieving magnet - 150-lb. pull. Originally designed to be used as a fishermans retrieval magnet, this magnet is perfect for retrieving fishing poles or tackle boxes from lakes. It can also be used as a heavy-duty magnet base. It contains ceramic (ferrite) magnets and is capable of lifting up to 150 pounds. Highly resistant to heat. Under normal use, permanent magnetism guaranteed. NOTE: Pounds pull is rated by vertical test on 3/8in. thick ground steel plate. Pounds pull rating will be reduced if the item you wish to lift is thinner, painted, or an uneven surface. Product Style: Retrieving / holding magnet, Material: Ceramic, Pulling Power (lbs.): 150, Height (in.): 1 1/16, Dimensions L x W (in.): 6 x 2 Eyebolt and nut included. [Read more]

Store: Northern Tool

Brand: Magnet Source

Magnetic Parts Tray Set - 2-Pc.

$39.99  $19.00

Each tray has built-in magnets to keep small parts and tools secure and within reach. Includes small 5 3/4in. diameter tray for small jobs and large 12in. diameter tray for larger jobs. Large tray has 3 ball-bearing casters to keep parts and tools handy when working under vehicles. Small tray has rubber bottom to prevent scratching fenders. Made of stainless steel. Product Style: Holding magnet, Material: Stainless steel, Diameter (in.): 5 3/4 and 12 [Read more]

Store: Northern Tool

Brand: Powerlift

Torin Chrome Wheel Hub Table, Model# TR6199A

$319.99

Make a statement with this unique table made out of 3 genuine chrome wheels. Looks great in the office, shop or anywhere. Single, Pair, or Set: Single, Pattern Design: Chrome wheel, Table Dimensions W x L (in.): 31 1/2 x 35 1/2 Matches chrome wheel stool Item# 380039 (sold separately) [Read more]

Store: Northern Tool

Brand: Torin Big Red

Master Magnetics Magnetic Sweeper with Release - 24in.W, Model# MFSM24RX

$189.99

Master Magnetics heavy-duty push-type sweeper with 24in. sweeping width is ideal for collecting large quantities of nails, screws, paper clips and any other ferrous metal items to keep work areas clean of dangerous metal debris. It features a quick load-release lever to quickly drop collected scrap metal by pulling back on the release handle. The MFSM24RX is an incredibly strong and well-built magnetic sweeper, yet very affordable. Product Style: Retrieving magnet, Pulling Power (lbs.): 6, Handle Length (in.): 48, Wheel Type: 6 inch rubber wheels, Height (in.): 42, Dimensions L x W (in.): 30 1/4 x 7 1/2 Picks up about 6 lbs. of 8 penny nails (600 pieces) [Read more]

Store: Northern Tool

Brand: Magnet Source

Vestil Mobile Tilting Work Table - 150-Lb. Capacity, 21in.L x 22in.W, Model# WT-2221

$299.99

Vestil mobile tilting work table is designed to bring work to an ergonomically correct position, helping to foster a more comfortable and productive work environment. Working in a comfortable position also reduces fatigue and risk of injuries. U.S.A. Capacity: 150 lbs. Platform size: 22in.W x 21in.L Lip height: 2in. Service range: 28in. to 38in. Platform tilt: 0-45° Platform height and tilt angle are manually adjustable Four 3 1/2in. x 1 1/4in. polyurethane swivel casters (two double locking) Allows unit to be transported from one work area to another while loaded Telescoping shaft with locking snap button for quick adjustment All-steel construction [Read more]

Store: Northern Tool

Brand: Vestil

HTC Portable Conveyor - 15in. W x 66in. L

$259.99

This portable conveyor/roller stand makes operations like planing, ripping, jointing and production work easier and is built to last. Features a durable. adjustable wedge-shaped support leg that can handle loads up to 500 lbs. Galvanized steel ball bearing rollers make moving stock through your saw, planer or production machinery easier than you ever thought possible. U.S.A. Dimensions: L (ft.) x W (in.): 5 1/2 x 15, Capacity (lbs.): 500, Height Range (in.): 26 1/2 - 43 1/2, Material: Galvanized steel 15in. wide x 66in. long with 9 rollers Galvanized steel ball bearing rollers Legs fold for storage or transport Limited lifetime warranty Model HRT-68 [Read more]

Store: Northern Tool

Brand: HTC

Torin Mobile Workbench - 54in, 1200-Lb. Capacity

$269.99  $239.99

Deluxe Torin Mobile Workbench features large, sturdy hardwood work surface that can support up to 1200-lb. loads. Also has 2 open shelves and 2 locking drawers that can hold 100 lbs. Heavy-duty 4in locking casters. Steel with textured powder-coat finish. 54in.W x 20 1/8in.D x 39in.H. Easy assembly. Capacity (lbs.): 1,200, Material: Steel, Top Material: Hardwood, Dimensions W x D x H (in.): 54 x 20 1/8 x 39, Drawers (qty.): 2, Caster Size (in.): 4, Caster Type: Locking, Finish Type: Textured powder coat, Includes: 2 Open shelves [Read more]

Store: Northern Tool

Brand: Torin Big Red

G-Floor Garage/Shop Floor Coverings - 9ft. x 20ft, Ribbed Design, Slate Gray, Model# GF920SG

$249.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Sturdy 100% PVC construction reduces dust and debris and withstands most contaminants found in garage or work environments. Durable non-slip coverings are easy to install, wont absorb oil or antifreeze and clean easily with soap and water. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 20 x 9, Material Type: PVC, Color: Slate Gray, Pattern Design: Ribbed Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

NoTrax V-Groove Corrugated Runner - 2ft. x 105ft, Black, Model# 730C0024BL-105

$399.99

The NoTrax® V-Groove Corrugated Runner™ features a rib-tooth design that improves traction, provides a barrier to cold flooring substrates and creates a silencing effect over noisy tile floors. Perfect for applications where safety and slip protection are needed with minimal anti-fatigue needs, such as side aisleways, warehouses and vending areas. 1/8in. overall thickness allows for easy on/off car traffic. Made of 100% recycled vinyl materials. In Black. U.S.A. Dimensions L x W (ft.): 105 x 2, Material Type: Vinyl compound, Material Thickness (in.): 1/8, Color: Black, Pattern Design: Rib-tooth [Read more]

Store: Northern Tool

Brand: NoTrax

Northern Industrial Tools Cable Ties - 4in. Size, 100-Pk.

$2.49

UV resistant makes them ideal for use outdoors. Length (in.): 4, Pieces (qty.): 100, Dimensions L (in.) x W (mm): 4 x 2.5 [Read more]

Store: Northern Tool

Brand: Northern Industrial Tools

Torin Big Red Pneumatic Swivel Stool, Model# TR6188C

$94.99

This Torin Pneumatic Swivel Stool easily adjusts from 27in. to 31 1/2in. and swivels 360° for easy and efficient movement. Capacity (lbs.): 300, Single, Pair, or Set: Single, Height (in.): 27 - 31 1/2, Adjustment Type: Pneumatic, Material Type: Vinyl with steel frame [Read more]

Store: Northern Tool

Brand: Torin Big Red

Pneumatic Stool with Backrest, Model# 710018

$49.99  $39.99

This Pneumatic Stool with Backrest has a padded vinyl seat and adjusts from 29in. to 33in.H with pneumatic adjustment lever under the seat. Adjustable: Yes, Height Range (in.): 29 - 33, Material: Vinyl, Wheel Type: None, Caster Type: None, Caster Material: None, Caster Size (in.): None Stool rotates 360° Backrest adjusts and can be removed when desired Bottom ring is 8.5in.; top ring is 17in.H Some assembly required [Read more]

Store: Northern Tool

Brand: Northern Tool

Better Life Technologies G-Floor Peel and Stick Tiles - 1Ft.L x 1Ft.W, White, 20-Pack, Model# T95DT12AW20P3

$79.99

This versatile G-Floor tile virtually seals your garage or workshop floor from moisture and contaminants, while reducing the amount of dirt tracked into your home and cushioning the floor. Rugged polyvinyl construction features ultimate diamond tread appearance. In White. U.S.A. Dimensions L x W (ft.): 1 x 1, Material Type: Polyvinyl, Material Thickness (in.): .095, Material Thickness (mils): 95, Color: Absolute White, Pattern Design: Diamond Tread, Tile Size (in.): 12 x 12 Prevents concrete floor damage Non-porous surface Easy to clean Reduces noise [Read more]

Store: Northern Tool

Brand: Better Life Technology

Master Magnetics Red Horseshoe Magnet, Model# 07225

$6.99

Red Alnico horseshoe magnet. 1 3/16in.W x 2 3/8in.H x 1/4in. thick comes with a keeper to retain magnetic charge. Product Style: Retrieving magnet, Material: Alnico, Pulling Power (lbs.): 1, Thickness (in.): 1/4, Height (in.): 2 3/8, Dimensions L x W (in.): 2 3/8 x 1 3/16 [Read more]

Store: Northern Tool

Brand: Magnet Source

National Public Seating Heavy-Duty Shop Stool - 24in, 300-Lb. Capacity, Model# 6224

$39.99

This National Public Seating Heavy-Duty Shop Stool is ideal for shops, garages and any place you need sturdy, durable seating. Adjustable: No, Capacity (lbs.): 300, Height Range (in.): 24, Dimensions W x H (in.): 15 x 24, Material: Steel, Includes: Stool Heavy-duty 18-gauge steel frame Riveted, warp-resistant masonite board seat Welded foot ring 15in. x 24in. 300-lb. capacity [Read more]

Store: Northern Tool

Brand: Tional Public Seating

HTC Roller Support - Super Duty

$129.99

Super-duty roller support has 500-lb. capacity and is designed for industrial and production applications. Features dual-position 16in. x 1 7/8in. diameter galvanized steel roller, heavy-duty 7/16in. hex roller axle and 4 rubber-tipped leveling feet. Perfect for drill presses, vertical bandsaws and other taller applications. Capacity (lbs.): 500, Roller Size (in.): 1 7/8, Height Range (in.): 28 - 45, Material: Galvanized steel, Application: Drill presses, vertical bandsaws Dual-position 16in. x 1 7/8in. diameter galvanized steel roller for improved material control Supports up to 500 lbs. 7/16in. hex roller axle 4 rubber-tipped leveling feet Easily adjusts from 28 in. to 45in. high with wedge-lock feature Limited lifetime warranty Model HSS-18 [Read more]

Store: Northern Tool

Brand: HTC

Little Giant Welded Steel Workbench, 60in. x 36in. Model# WW-3660

$499.99

Heavy-duty 34in. high workbench has a 7-gauge reinforced steel top with rounded comfort edges to support up to 10,000 lbs. capacity. U.S.A. Capacity (lbs.): 10,000, Material: Steel, Top Material: 7 gauge steel, Dimensions W x D x H (in.): 60 x 36 x 34, Includes: Rounded comfort edge on the top [Read more]

Store: Northern Tool

Brand: Little Giant Hand Truck

Northern Industrial Zinc-Plated Hose Clamps - 34-Pc. Set

$7.00

Pack of 34 worm gear hose clamps in eight popular sizes, 1 1/16in. through 2 3/4in. You get four 1 1/16in. size, six each of 1 1/4in, 1 1/2in. and 1 3/4in, four each of 2in. and 2 1/4in, and 2 each of 2 1/2in. and 2 3/4in. sizes. [Read more]

Store: Northern Tool

Brand: Northern Industrial Tools

Tennsco 72in. x 30in. Workbench Side/Backstop Rail, Model# SB-3072MG

$39.99

The Tennsco 72in. x 30in. Workbench Side/Backstop Rail is 3in. high to keep items from rolling off ends and back. For use with Tennsco 72in. workbench, sold separately. U.S.A. Material: Steel, Dimensions W x D x H (in.): 72 x 30 x 3 side/back rail, Includes: 3 rail pieces for 72in. workbench Made of 16-gauge steel 3in. high rail [Read more]

Store: Northern Tool

Brand: Tennsco

Master Magnetics Neodymium Disc Magnets - 6-Pc. Set, Model# 07046

$9.99

6-pc. neodymium magnet disc set. Each measures 7/16 in. dia. x 1/8 in. thick. Also known as rare earth magnets, these neodymium magnets are the strongest magnet material available. Great for projects that require extreme strength in a small size such as holding knife blades while not in use, holding metal in place while welding, drilling or machining, or impressing your friends with magic tricks. Warning: Powerful attraction force can pinch fingers and chip magnets. Carefully slide magnets apart and together. Product Style: Holding magnet, Material: Neodymium (earth magnet), Thickness (in.): 1/8, Diameter (in.): 7/16 [Read more]

Store: Northern Tool

Brand: Magnet Source

Sharpie Magnum 44 Marker in Black

$3.99

This is what you need for those BIG permanent marking jobs! This marker lays down an extra-wide, highly visible bold line with a single stroke. Plus, you get the same specially formulated permanent ink as the King-Size marker in a super-sized metal barrel and a 5/8in. wool felt tip. U.S.A. [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

Intertape Tape Dispenser with 2 Rolls of Tape, Model# 2892

$9.99

Pistol grip dispenser has adjustable tension control. Comes with 2 rolls of carton sealing tape. U.S.A. Tape Type: Packaging tape, Length (ft.): 163 (Tape), Max. Width (in.): 1 7/8 (Tape), Material: Plastic (Dispenser), Adhesive Thickness (mil.): 2 (Tape), Includes (qty.): 1 Dispenser and 2 rolls of tape, Works With: Tape and dispenser work together [Read more]

Store: Northern Tool

Brand: Intertape

Tennsco 72in. Lower Shelf for Workbench, Model# S-72MG

$59.99

The Tennsco 72in. Lower Shelf for Workbench increases workbench storage space below the work surface. For use with Tennsco 72in. workbench, sold separately. U.S.A. Material: Steel, Dimensions W x D x H (in.): 72 x 14 1/2 shelf, Includes: One 72in. shelf for workbench Shelf is 16-gauge steel 14 1/2in. deep Has 1 1/2in. channel formation at front for added strength [Read more]

Store: Northern Tool

Brand: Tennsco

Northern Industrial Tools Cable Ties - 4in. Size, 1000-Pk.

$7.99

UV resistant makes them ideal for use outdoors. Length (in.): 4, Pieces (qty.): 1,000, Dimensions L (in.) x W (mm): 4 x 2.5 [Read more]

Store: Northern Tool

Brand: Northern Industrial Tools

Montezuma 48in. Workbench, Model# T-WB4802

$229.99

Sturdy Montezuma 2-drawer workbench features a large, durable 24in. x 48in. 25mm bamboo benchtop and rust-resistant powder-coated steel bottom. Drawers have easy-glide ball bearing slides. Lower bottom shelf is roomy for storage of bulky tools and supplies. Ideal size and height for working on projects in the garage or workshop. Capacity (lbs.): 600, Material: Steel, Top Material: Bamboo, Dimensions W x D x H (in.): 48 x 11 3/8 x 36, Drawers (qty.): 2, Finish Type: Powder-coat 600-lb. load capacity 36in.H Assembly required [Read more]

Store: Northern Tool

Brand: Montezuma

Master Magnetics Black Magnetic Cup Caddy, Model# 07583

$7.99

Keep your favorite beverage at hand with the Master Magnetics magnetic cup caddy when working in the garage, workshop or outdoors. Powerful magnet attaches to any ferrous metal surface including toolbox, cabinet or even your stationary vehicle. Holds an insulated mug, hot or cold container, aluminum can or fountain cup. Also useful for keeping cans, spray paint, lubricants, small tools and more within easy reach. Product Style: Holding magnet, Material: Plastic, Diameter (in.): 3 1/2, Dimensions L x W (in.): 4 5/8 x 3 1/2 Holds containers up to 3.25in. diameter at base Rubber backing prevents surface scratches [Read more]

Store: Northern Tool

Brand: Magnet Source

The ATTRACTOR II Magnetic Mini Sweeper - 12in, Model# PS337B

$29.99

The ATTRACTOR II 12in. bar sweeper magnet features 150 pounds of pull, 46in. overall length for no-stoop sweeping and 6in. wheels for a minimum clearance and easy rolling through heavy debris. Comes partly assembled at the proper height but can be adjusted to user preference. U.S.A. Product Style: Retrieving magnet, Material: Steel, Pulling Power (lbs.): 150, Handle Length (in.): 40, Wheel Type: 6 inch, Height (in.): 46, Dimensions L x W (in.): 51 x 8 Magnetic assemblies are up to 32X stronger than magnets themselves Magnet hangs on the axle allowing it to swing - when coming in contact with a rock, clod or high spot, the debris will not be brushed off Handle is detachable for easy transport to and from the job The wooden handle prevents possibility of electrocution when in contact with electricity on the jobsite, shop or home Aluminum ferrule prevents damage to the wooden handle Heavy steel construction [Read more]

Store: Northern Tool

Brand: Attractor

G-Floor Garage/Shop Floor Coverings - 7 1/2ft. x 20ft, Ribbed Design, Racing Blue, Model# GF720RB

$199.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Sturdy 100% PVC construction reduces dust and debris and withstands most contaminants found in garage or work environments. Durable non-slip coverings are easy to install, wont absorb oil or antifreeze and clean easily with soap and water. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 20 x 7 1/2, Material Type: PVC, Color: Racing Blue, Pattern Design: Ribbed Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

Northern Industrial Tools Cable Ties - 7in. Size, 1000-Pk.

$19.99

UV resistant makes them ideal for use outdoors. Length (in.): 7, Pieces (qty.): 1,000, Dimensions L (in.) x W (mm): 7 x 3.6 [Read more]

Store: Northern Tool

Brand: Northern Industrial Tools

G-Floor Garage/Shop Floor Coverings - 7 1/2ft. x 20ft, Ribbed Design, Sandstone, Model# GF720SA

$199.99

G-Floor garage/shop floor coverings help keep your floors looking like new. Sturdy 100% PVC construction reduces dust and debris and withstands most contaminants found in garage or work environments. Durable non-slip coverings are easy to install, wont absorb oil or antifreeze and clean easily with soap and water. Coverings hide cracks and stains on old floors, protect new floors and provide cushioning, anti-fatigue benefits and insulation. U.S.A. Dimensions L x W (ft.): 20 x 7 1/2, Material Type: PVC, Color: Sandstone, Pattern Design: Ribbed Protects against stains Attractive covering for floors No adhesives necessary Easily trims for a custom fit Design channels debris and avoids tracking Easy clean up with soap and water [Read more]

Store: Northern Tool

Brand: Northern Tool and Equipment

K & M Manufacturing Classic International Harvestor Stool - 33in.H, Model# 9767

$149.99

This K & M Manufacturing Classic International Harvestor Stool features a durable cover with the original International Harvestor logo. Height Range (in.): 33, Dimensions W x H (in.): 17 x 33, Material: Steel, vinyl, Includes: Stool Double-ringed base for stability 360° smooth-action ball bearing swivel Leg glides make it easy to move and prevent scratches [Read more]

Store: Northern Tool

Brand: K & M

Northern Industrial Tools Cable Ties - 11in. Size, 1000-Pk.

$39.99

UV resistant makes them ideal for use outdoors. Length (in.): 11, Pieces (qty.): 1,000, Dimensions L (in.) x W (mm): 11 x 4.8 [Read more]

Store: Northern Tool

Brand: Northern Industrial Tools