|
Factory Air Air Conditioning Clutch - 47878
$89.99
New Clutch Assembly with Coil. Most Air Conditioning Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Factory Air
|
Perfection Clutch Clutch Set New - V12-205
$128.89
Clutch Bleeding Set. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
Perfection Clutch New Flywheel - 50-126
$86.99
Flywheel hot spots can cause chatter. Resurfacing a flywheel doesn't always remove hot spots. The flywheel may look shiny and pretty, but the hot spots will often still be there. Service the System by replacing the flywheel and the clutch set at the same time. All flywheels come with a new ring gear. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
|
Factory Air A/C Compressor New with Clutch - 78301
$322.99
MPN #78301. Factory Air A/C Compressor New with Clutch. Most Air Conditioning Compressors products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Factory Air
|
Hays CLUTCH DISC-MUSTANG 1-1/1 - 40-150
$135.99
MPN #40-150. Hays Street/Strip Clutch Disc, 10 - Spline, 10.5 in. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Hays
|
Factory Air Air Conditioning Clutch - 47867
$81.99
New Clutch Assembly with Coil. Most Air Conditioning Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Factory Air
|
|
Dorman - Help Clutch Alignment Tool - 14523
$1.99
Precision made to ensure proper alignment of clutch components during installation. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Dorman - Help
|
Tru-Torque Clutch Slave Cylinder Kit - CS360027
$42.19
MPN #CS360027. Tru-Torque Clutch Slave Cylinder Kit. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Tru-Torque
|
Factory Air Air Conditioning Clutch - 47874
$99.99
New Clutch Assembly with Coil. Most Air Conditioning Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Factory Air
|
|
Factory Air Air Conditioning Clutch - 47280
$122.99
New Clutch Assembly with Coil. Most Air Conditioning Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Factory Air
|
Perfection Clutch TECHnovation Clutch Slave Cylinder - 360052
$49.99
Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
Perfection Clutch New Clutch Set - MU1963-1
$169.99 $152.99
New Perfection Clutch Sets include a new O.E.M-style cover assembly that's been computer-tested for clamp load, plate lift, and finger height, a new O.E.M-style clutch disc with facings built to exceed O.E.M. specifications and a new clutch release bearing that meets or exceeds O.E.M. specifications. Also includes a new pilot bearing/bushing (where used), an alignment tool for the perfect clutch installation (where available) and a hydraulic line disconnect tool (where used). Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
|
Perfection Clutch New Clutch Set - MU47707-1B
$139.99 $125.99
New Perfection Clutch Sets include a new O.E.M-style cover assembly that's been computer-tested for clamp load, plate lift, and finger height, a new O.E.M-style clutch disc with facings built to exceed O.E.M. specifications and a new clutch release bearing that meets or exceeds O.E.M. specifications. Also includes a new pilot bearing/bushing (where used), an alignment tool for the perfect clutch installation (where available) and a hydraulic line disconnect tool (where used). Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
Perfection Clutch New Clutch Set - MU70124-1
$311.99 $280.79
New Perfection Clutch Sets include a new O.E.M-style cover assembly that's been computer-tested for clamp load, plate lift, and finger height, a new O.E.M-style clutch disc with facings built to exceed O.E.M. specifications and a new clutch release bearing that meets or exceeds O.E.M. specifications. Also includes a new pilot bearing/bushing (where used), an alignment tool for the perfect clutch installation (where available) and a hydraulic line disconnect tool (where used). Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
Perfection Clutch TECHnovation Clutch Slave Cylinder - 37568
$35.99
Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
|
Perfection Clutch New Clutch Set - MU1990-1
$149.99 $134.99
New Perfection Clutch Sets include a new O.E.M-style cover assembly that's been computer-tested for clamp load, plate lift, and finger height, a new O.E.M-style clutch disc with facings built to exceed O.E.M. specifications and a new clutch release bearing that meets or exceeds O.E.M. specifications. Also includes a new pilot bearing/bushing (where used), an alignment tool for the perfect clutch installation (where available) and a hydraulic line disconnect tool (where used). Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
Perfection Clutch TECHnovation Clutch Slave Cylinder - 37920
$43.99
Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
Perfection Clutch TECHnovation Clutch Slave Cylinder - 37682
$19.99
Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
|
Perfection Clutch Clutch Set - MU72331-1
$294.31 $264.87
MPN #MU72331-1. Perfection Clutch Clutch Set. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
Perfection Clutch New Clutch Set - MU72178-1
$207.09 $186.38
New Perfection Clutch Sets include the following: New OEM-style cover assembly, computer-tested for clamp load, plate lift, and finger height; new OEM-style clutch disc with facings built to exceed OEM specifications; new clutch release bearing meeting or exceeding OEM specifications; new pilot bearing/bushing (where used); alignment tool for the perfect clutch installation (where available); hydraulic line disconnect tool (where used). Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
Perfection Clutch Clutch Set Perfect - MU72277-1
$459.69 $413.72
New Perfection Clutch Sets include the following: New OEM-style cover assembly, computer-tested for clamp load, plate lift, and finger height; new OEM-style clutch disc with facings built to exceed OEM specifications; new clutch release bearing meeting or exceeding OEM specifications; new pilot bearing/bushing (where used); alignment tool for the perfect clutch installation (where available); hydraulic line disconnect tool (where used). Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
|
Perfection Clutch Clutch Set - MU72395-1
$459.99 $413.99
MPN #MU72395-1. Perfection Clutch Clutch Set. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
Perfection Clutch TECHnovation Clutch Master Cylinder - 39762
$59.99
Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
Perfection Clutch New Clutch Set - MU47701-1A
$205.99 $185.39
New Perfection Clutch Sets include a new O.E.M-style cover assembly that's been computer-tested for clamp load, plate lift, and finger height, a new O.E.M-style clutch disc with facings built to exceed O.E.M. specifications and a new clutch release bearing that meets or exceeds O.E.M. specifications. Also includes a new pilot bearing/bushing (where used), an alignment tool for the perfect clutch installation (where available) and a hydraulic line disconnect tool (where used). Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
|
Perfection Clutch New Clutch Set - MU1858-1B
$147.99 $133.19
New Perfection Clutch Sets include a new O.E.M-style cover assembly that's been computer-tested for clamp load, plate lift, and finger height, a new O.E.M-style clutch disc with facings built to exceed O.E.M. specifications and a new clutch release bearing that meets or exceeds O.E.M. specifications. Also includes a new pilot bearing/bushing (where used), an alignment tool for the perfect clutch installation (where available) and a hydraulic line disconnect tool (where used). Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
Clutch Masters Clutch Kits - Stage 4 (FX400) [89-96 Nissan 300ZX 3.0L 6Cyl.]
$514.08
Harsh Engagement Best Road Race (High Power) [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
Clutch Masters Clutch Kits - Stage 4 (FX400) [83-85 Toyota Corolla 1600 1.6L 4Cyl.]
$393.12
Harsh Engagement Best Road Race (High Power) [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
|
Clutch Masters Clutch Kits - Stage 2 (FX200) [91-98 Nissan 240SX 2.4L 4Cyl.]
$419.04
Smooth Engagement Long Life (No road race/autocross). Significant Break-In Required. [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
Clutch Masters Clutch Kits - Stage 2 (FX200) [92-00 Honda Civic 1.4L 4Cyl.]
$410.40
Smooth Engagement Long Life (No road race/autocross). Significant Break-In Required. [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
Clutch Masters Clutch Kits - Stage 3 (FX300) [04 Subaru Impreza WRX STI 2.5L]
$643.68
Positive Engagement Best Street Strip Long Life (No road race/autocross) Significant Break-In Required [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
|
Clutch Masters Clutch Kits - Stage 3 (FX300) [85-89 Toyota Celica 2.0L 4Cyl.]
$444.96
Positive Engagement Best Street Strip Long Life (No road race/autocross) Significant Break-In Required [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
Clutch Masters Clutch Kits - Stage 5 (FX500) [02-03 Subaru Impreza WRX 2.0L 4Cyl.]
$475.20
Drag Immediate (Harsh) Engagement [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
Clutch Masters Clutch Kits - Stage 4 (FX400) [96-02 Hyundai Elantra 1.8L 4Cyl.]
$494.21
Harsh Engagement Best Road Race (High Power) [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
|
Clutch Masters Clutch Kits - Stage 3 (FX300) [89-94 Eagle Talon 1.8L 4Cyl.]
$407.81
Positive Engagement Best Street Strip Long Life (No road race/autocross) Significant Break-In Required [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
Clutch Masters Clutch Kits - Stage 2 (FX200) [96-1 / 01 Ford Mustang 4.6L 8Cyl.]
$540.00
Smooth Engagement Long Life (No road race/autocross). Significant Break-In Required. [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
Clutch Masters Clutch Kits - Stage 2 (FX200) [02-03 Nissan Sentra 2.4L 4Cyl.]
$475.20
Smooth Engagement Long Life (No road race/autocross). Significant Break-In Required. [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
|
Clutch Masters Clutch Kits - Stage 2 (FX200) [95-96 Dodge Avenger 2.4L 4Cyl.]
$548.64
Smooth Engagement Long Life (No road race/autocross). Significant Break-In Required. [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
Clutch Masters Clutch Kits - Stage 2 (FX200) [91-99 Saturn SC 1.9L]
$453.60
Smooth Engagement Long Life (No road race/autocross). Significant Break-In Required. [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
Clutch Masters Clutch Kits - Stage 2 (FX200) [90-91 Geo Prizm 1.6L 4Cyl.]
$470.88
Smooth Engagement Long Life (No road race/autocross). Significant Break-In Required. [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
|
Clutch Masters Clutch Kits - Stage 5 (FX500) [92-03 Toyota Corolla 1800 1.8L 4Cyl.]
$341.28
Drag Immediate (Harsh) Engagement [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
Clutch Masters Clutch Kits - Stage 3 (FX300) [89-93 Ford Thunderbird 3.8L 6Cyl.]
$540.00
Positive Engagement Best Street Strip Long Life (No road race/autocross) Significant Break-In Required [Read more]
Store: Andy's Auto Sport
Brand: Clutch Masters
|
HYDRAULIC UNIT ASSY. TYPE-1 TYPE-1 FOR DRY CLUTCH ONLY
€346.50
Hydraulic unit assy (typ. [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
|
124CC, 12 volt, 5 speeds, new Superhead, Dry Hydrolic Clutch
€4,000.00
available at cmsnl.com - parts for a better ride [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
CLUTCH LEVER ASSY. MONKEY? APE (SPL DRY CLUTCH FOR CLUTCH )
€21.50
Clutch lever for Monkey & Gorilla - . [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
CLUTCH LEVER & CLUTCH WIRE SET APE50/100 (NORMALFOR CLUTCH )
€36.00
Clutch lever + clutch cable fo. [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
|
NEW SPL CLUTCH & NEW DRY CLUTCH REPAIR PARTS STAINLESS CLUTCH C
€35.00
Special wet & dry clutch 95. [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
CLUTCH OUTER SET FOR OLD DRY CLUTCH
€95.50
available at cmsnl.com - parts for a better ride [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
HEAVY-DUTY CLUTCH KIT (6-DISK) KSR110/KLX110 (FOR MANUAL CLUTCH
€239.00
available at cmsnl.com - parts for a better ride [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
|
SPECIAL CLUTCH 5-DISK KIT WITH OIL FILTER FOR SPECIAL CLUTCH O
€320.00
Special wet clutch 4-disc. [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
SPECIAL CLUTCH KIT (DIE CAST COVER/POLISHED) FOR STOCK CLUTCH, 6
€871.50
available at cmsnl.com - parts for a better ride [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
(02-01-5033) SPECIAL CLUTCH KIT (DIE-CAST CLUTCH COVER: ALUMINUM
€507.50
available at cmsnl.com - parts for a better ride [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
|
SPECIAL CLUTCH AND MAGNESIUM CLUTCH COVER KIT FOR YX150/160
€943.00
available at cmsnl.com - parts for a better ride [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
SPL CLUTCH KIT (5-DISK/CENTRIFUGAL CLUTCH ) 12V DAX (AB26/FOR 5
€981.00
Special wet 5-disc clutch kit for 12V D. [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
CLUTCH MASTER CYLINDER (1/2 12.7mm) HYDRAULIC DRY CLUTCH REPA
€105.50
Repair part - clutch master cylinder assy for 002-02-202/203. [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
|
(00-02-0200) CLUTCH LEVER CLUTCH MASTER REPAIR PARTS
€24.00
available at cmsnl.com - parts for a better ride [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
SPECIAL CLUTCH AND MAGNESIUM CLUTCH COVER KIT FOR LIFAN 120/140/
€919.50
available at cmsnl.com - parts for a better ride [Read more]
Store: Motorcycle Parts and Accessories - cmsnl.com (NL)
Brand: Takegawa
|
01-05 BMW 3 Series 2Dr M3 E46 FX100 Stage 1 Clutch
$799.98
BMW flywheels are dual-mass. Re-surfacing the dual-mass flywheel is not recommended. We recommend replacing the flywheel with the OE dealer part. Customers replacing the flywheel with a lighten aluminum flywheelmay experience noise on idle and during drive. This application does not include springs on the disc. You are ordering a solid hub disc. Clutch Kit includes Pressure plate, performance disc, throw out bearing, pilot bearing and alignment key. Note: Some clutch kits will not include throw-out bearing and pilot bearing or bushing. M3 E46 FX100 Stage 1 Clutch M3 includes non-sprung discAll Clutch Masters systems come complete with: Pressure Plate Clutch Disc Throw-out Bearing (when applicable) Pilot Bearing or Bushing (when applicable) Alignment Tool [Read more]
Store: StreetBeatCustoms.com
Brand: Clutch Masters
|
|
05-09 Ford Mustang SPEC Clutches Stage 2 Plus Clutch - 60023
$372.99
Has the modding bug bit you after you bought your 2005+ Mustang GT? Adding forced induction to this car is quite simple and creates massive horsepower and torque gains, but you have to safely control the power that is heading to your wheels. Thats where the SPEC Stage 2+ Clutch comes in! The Stage 2+ Clutches are designed for all modified engines making more torque than the standard stage 2 can support. The Stage 2+ clutch offers stage 2 feel for good daily drivability and offers very good wear characteristics, but provides a higher torque capacity. This particular stage can hold up to 669 ft/lb of torque! Each Stage 2+ Clutch includes a high clamp pressure plate, composite multi-friction carbon-kevlar material, high torque sprung hub and disc assembly. SPEC even provides you with an alignment tool. Technical Note: The 2005+ Mustang uses a concentric slave cylinder instead of a conventional throwout bearing. Therefore this clutch kit will not include a throwout bearing. It is recommended to install a new SPEC flywheel with this replacement clutch for the 2005+ Mustang GT. Look at our flywheel page for these 2005+ steel and aluminum flywheels. Specifications: Fits 2005+ GT Mustangs Torque Rating: 669 ft./lbs. Ford Mustang SPEC Clutches Stage 2 Plus Clutch - 60023 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 2 Plus Clutch - 60023 Fits: 2005-2009 Ford Mustang GT [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
93-98 Ford Mustang SPEC Clutches Stage 2 Clutch - 60005
$303.99
Boosted 2v and 4v Engines need a clutch that can keep up with the increased torque on the transmission. More HP means more torque, and the stock clutch in Mustangs wont hold all of that boosted torque without failing and damaging the transmission. This SPEC Stage 2 clutch will safely hold 520 ft/lb of torque without failing, so you can play hard and drive hard like you are supposed to do with your Mustang! Stage 2 Clutches are designed for all mild to moderately modified naturally aspirated and power adder engines, but can be used with stock power levels without sacrficing drivability or excessive wear characteristics. Each Stage 2 Clutch includes a high clamp pressure plate, pure Kevlar friction material and high torque sprung hub and disc assembly, bearing and tool kit. And if you are replacing your clutch it is also a good idea to replace your Clutch Cable and Quadrant at the same time to prolong the life of your new Clutch. Specifications: Designed for 1986-1995 5.0L with a T-5 or T-45 Designed for 1993-1998 Cobra with a T-5 or T-45 Designed for 1996-Mid 2001 GT with a T-5 or T-45 Disc Dimensions: 10-1/2" X 10T X 1-1/16" Torque Rating: 520 ft./lbs. Note: Because Ford made changes to the Mustang GT and Bullitt in mid year of 2001, be sure to check and see what kind of transmission type you have before ordering. Ford Mustang SPEC Clutches Stage 2 Clutch - 60005 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 2 Clutch - 60005 Fits: 1993-1998 Ford Mustang GT & Cobra [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
05-09 Ford Mustang SPEC Clutches Stage 2 Clutch - 60007
$347.99
Has the modding bug bit you after you bought your 2005+ Mustang GT? Adding forced induction to this car is quite simple and creates massive horsepower and torque gains, but you have to safely control the power that is heading to your wheels. Thats where the SPEC Stage 2 Clutch comes in! Stage 2 Clutches are designed for all mild to moderately modified naturally aspirated and power adder engines, but can be used with stock power levels without sacrificing drivability or excessive wear characteristics. This particular stage can hold up to 520 ft/lb of torque! Each Stage 2 Clutch includes a high clamp pressure plate, pure Kevlar friction material and high torque sprung hub and disc assembly. SPEC even provides you with an alignment tool. Concerned about the clutch pedal being hard to push down? Well don't be, for SPEC designed this clutch to have stock-like daily drivability and wear characteristics that will make your clutch last longer so you wont have to replace it again! Technical Note: The 2005+ Mustang uses a concentric slave cylinder instead of a conventional throwout bearing. Therefore this clutch kit will not include a throwout bearing. It is recommended to install a new SPEC flywheel with this replacement clutch for the 2005+ Mustang GT. Look at our flywheel page for these 2005+ steel and aluminum flywheels. Torque Rating: 520 ft./lbs. Ford Mustang SPEC Clutches Stage 2 Clutch - 60007 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 2 Clutch - 60007 Fits: 2005-2009 Ford Mustang GT [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
|
93-98 Ford Mustang SPEC Clutches Stage 1 Clutch - 60001
$220.99
You have a V8 Engine in your car, a high powered muscle machine. You put down lots of horsepower and torque, but is your clutch able to handle it? If you're starting to smell that odoriforous burnt clutch smell, its probably time to replace that factory clutch and put in something that can hold more power. Well look no further as SPEC Clutches here at American Muscle, and they are a new valued addition to our product lineup! This SPEC Stage 1 Clutch is designed for bolt-on naturally aspirated and mildly modified forced induction engines. Concerned about the clutch pedal being hard to push down? Well dont be, for SPEC designed this clutch to have stock-like daily drivability and wear characteristics that will make your clutch last longer so you wont have to replace it again! This Stage 1 clutch has a high clamp pressure plate, steel-backed and multi-compound woven organic material and high torque sprung hub and disc assembly, bearing and tool kit. When looking for a new clutch, trust SPEC for the best in value and performance. And if you are replacing your clutch it is also a good idea to replace your Clutch Cable and Quadrant at the same time to prolong the life of your new Clutch. Specifications: Designed for 1986-1995 5.0L with a T-5 or T-45 Designed for 1993-1998 Cobra with a T-5 or T-45 Designed for 1996-Mid 2001 GT with a T-5 or T-45 Disc Dimensions: 10-1/2" X 10T X 1-1/16" Torque Rating: 410 ft./lbs. NOTE: Because Ford made changes to the Mustang GT and Bullitt in mid year of 2001, be sure to check and see what kind of transmission type you have before ordering. Ford Mustang SPEC Clutches Stage 1 Clutch - 60001 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 1 Clutch - 60001 Fits: 1993-1998 Ford Mustang GT & Cobra [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
01-04 Ford Mustang SPEC Clutches Stage 1 Clutch - 60002
$230.99
You have a V8 Engine in your car, a high powered muscle machine. You put down lots of horsepower and torque, but is your clutch able to handle it? If you're starting to smell that odoriforous burnt clutch smell, its probably time to replace that factory clutch and put in something that can hold more power. Well look no further as SPEC Clutches here at American Muscle, and they are a new valued addition to our product lineup! This SPEC Stage 1 Clutch is designed for bolt-on naturally aspirated and mildly modified forced induction engines. Concerned about the clutch pedal being hard to push down? Well dont be, for SPEC designed this clutch to have stock-like daily drivability and wear characteristics that will make your clutch last longer so you wont have to replace it again! This Stage 1 clutch has a high clamp pressure plate, steel-backed and multi-compound woven organic material and high torque sprung hub and disc assembly, bearing and tool kit. When looking for a new clutch, trust Spec for the best in value and performance. And if you are replacing your clutch it is also a good idea to replace your Clutch Cable and Quadrant at the same time to prolong the life of your new Clutch. Specifications: Designed for Mid 2001-2004 GT's with a T-45 or TR3650 Transmission Designed for 2003-2004 Mach 1 with a TR3650 Designed for 2003-2004 Cobra with a T-56 Disc Dimensions: 11" X 10T X 1-1/16" Torque Rating: 420 ft./lbs. NOTE: Because Ford made changes to the Mustang GT and Bullitt in mid year of 2001, be sure to check and see what kind of transmission type you have before ordering. Ford Mustang SPEC Clutches Stage 1 Clutch - 60002 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 1 Clutch - 60002 Fits: 2001-2004 Ford Mustang GT & Cobra & Mach 1 [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
05-09 Ford Mustang SPEC Clutches Stage 1 Clutch - 60003
$249.99
Have you already burned out the clutch on your new monster machine known as the 2005+ Mustang GT? If you are looking for a replacement to hold more horsepower with a lighter pedal, then look no further, as SPEC delivers! This SPEC Stage 1 Clutch is designed for bolt-on naturally aspirated and mildly modified forced induction engines. Concerned about the clutch pedal being hard to push down? Well dont be, for SPEC designed this clutch to have stock-like daily drivability and wear characteristics that will make your clutch last longer so you wont have to replace it again! This Stage 1 clutch has a high clamp pressure plate, steel-backed and multi-compound woven organic material and high torque sprung hub and disc assembly, and includes the alignment tool. When looking for a new clutch, trust SPEC for the best in value and performance. Technical Note: The 2005+ Mustang uses a concentric slave cylinder instead of a conventional throwout bearing. Therefore this clutch kit will not include a throwout bearing. It is recommended to install a new SPEC flywheel with this replacement clutch for the 2005+ Mustang GT. Look at our flywheel page for these 2005+ steel and aluminum flywheels. Torque Rating: 410 ft./lbs. Ford Mustang SPEC Clutches Stage 1 Clutch - 60003 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 1 Clutch - 60003 Fits: 2005-2009 Ford Mustang GT [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
|
01-04 Ford Mustang SPEC Clutches Stage 2 Clutch - 60006
$328.99
Boosted 2v and 4v Engines need a clutch that can keep up with the increased torque on the transmission. More HP means more torque, and the stock clutch in Mustangs wont hold all of that boosted torque without failing and damaging the transmission. This SPEC Stage 2 clutch will safely hold 530 ft/lb of torque without failing, so you can play hard and drive hard like you are supposed to do with your Mustang! Stage 2 Clutches are designed for all mild to moderately modified naturally aspirated and power adder engines, but can be used with stock power levels without sacrficing drivability or excessive wear characteristics. Each Stage 2 Clutch includes a high clamp pressure plate, pure Kevlar friction material and high torque sprung hub and disc assembly, bearing and tool kit. And if you are replacing your clutch it is also a good idea to replace your Clutch Cable and Quadrant at the same time to prolong the life of your new Clutch. Specifications: Designed for Mid 2001-2004 GT's with a T-45 or TR3650 Transmission Designed for 2003-2004 Mach 1 with a TR3650 Designed for 2003-2004 Cobra with a T-56 Disc Dimensions: 11" X 10T X 1-1/16" Torque Rating: 530 ft./lbs. Note: Because Ford made changes to the Mustang GT and Bullitt in mid year of 2001, be sure to check and see what kind of transmission type you have before ordering. Ford Mustang SPEC Clutches Stage 2 Clutch - 60006 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 2 Clutch - 60006 Fits: 2001-2004 Ford Mustang GT & Cobra & Mach 1 [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
01-04 Ford Mustang SPEC Clutches Stage 2 Plus Clutch - 60027
$372.99
Boosted 2v and 4v Engines need a clutch that can keep up with the increased torque on the transmission. More HP means more torque, and the stock clutch in Mustangs wont hold all of that boosted torque without failing and damaging the transmission. This SPEC Stage 2+ clutch will safely hold 669 ft/lb of torque without failing, so you can play hard and drive hard like you are supposed to do with your Mustang! The Stage 2+ Clutches are designed for all modified engines making more torque than the standard stage 2 clutch can support. The Stage 2+ clutch offers stage 2 feel for good daily drivability and offers very good wear characteristics, but provides a higher torque capacity. This particular stage can hold up to 669 ft/lb of torque! Each Stage 2+ Clutch includes a high clamp pressure plate, composite multi-friction carbon-kevlar material, high torque sprung hub and disc assembly, bearing and tool kit. SPEC even provides you with an alignment tool. And if you are replacing your clutch it is also a good idea to replace your Clutch Cable and Quadrant at the same time to prolong the life of your new Clutch. Specifications: Designed for Mid 2001-2004 GT's with a T-45 or TR3650 Transmission Designed for 2003-2004 Mach 1 with a TR3650 Designed for 2003-2004 Cobra with a T-56 Disc Dimensions: 11" X 10T X 1-1/16" Torque Rating: 669 ft./lbs. Note: Because Ford made changes to the Mustang GT and Bullitt in mid year of 2001, be sure to check and see what kind of transmission type you have before ordering. Ford Mustang SPEC Clutches Stage 2 Plus Clutch - 60027 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 2 Plus Clutch - 60027 Fits: 2001-2004 Ford Mustang GT & Cobra & Mach 1 [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
01-04 Ford Mustang SPEC Clutches Stage 3 Clutch - 60017
$318.99
If your Mustang is making some serious power, then you need a serious clutch. Not looking to pay an arm and a leg for something that can hold all your torque? Look no further. This SPEC Stage 3 Clutch is designed for heavily modified street and race engines. If you have a supercharger or a turbo and need that extra clamping power, but don't want to lose too much drivability, you need this. Worried about having to replace this clutch after a few passes down the track? Dont be! This SPEC Stage 3 Clutch offers incredibly good wear characteristics under low and high stress usage. The Stage 3 Clutch includes the high clamp pressure plate, the 6 puck carbon semi-metallic friction with high torque sprung hub and disc assembly, as well as the bearing and tool kits. And if you are replacing your clutch it is also a good idea to replace your Clutch Cable and Quadrant at the same time to prolong the life of your new Clutch. Specifications: Designed for Mid 2001-2004 GT's with a T-45 or TR3650 Transmission Designed for 2003-2004 Mach 1 with a TR3650 Designed for 2003-2004 Cobra with a T-56 Disc Dimensions: 11" X 10T X 1-1/16" Torque Rating: 695 ft./lbs. NOTE: Because Ford made changes to the Mustang GT and Bullitt in mid year of 2001, be sure to check and see what kind of transmission type you have before ordering. Ford Mustang SPEC Clutches Stage 3 Clutch - 60017 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 3 Clutch - 60017 Fits: 2001-2004 Ford Mustang GT & Cobra & Mach 1 [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
|
01-04 Ford Mustang SPEC Clutches Stage 3 Plus Clutch - 60028
$450.99
Boosted 2v and 4v Engines need a clutch that can keep up with the increased torque on the transmission. More HP means more torque, and the stock clutch in Mustangs wont hold all of that boosted torque without failing and damaging the transmission. This SPEC Stage 3+ clutch will safely hold 850 ft/lb of torque without failing, so you can play hard and drive hard like you are supposed to do with your Mustang! The Stage 3+ Clutches are designed for heavily modified street and race engines making more torque than the standard stage 3 clutch can support. The Stage 3+ clutch offers good daily drivability and better manageability than the stage 3, with even better wear characteristics and provides a higher torque capacity. This particular stage can hold up to 850 ft/lb of torque! Each Stage 3+ Clutch includes a high clamp pressure plate, full-faced carbon metallic friction, high torque sprung hub and disc assembly, bearing and tool kit. SPEC even provides you with an alignment tool. And if you are replacing your clutch it is also a good idea to replace your Clutch Cable and Quadrant at the same time to prolong the life of your new Clutch. Specifications: Designed for Mid 2001-2004 GT's with a T-45 or TR3650 Transmission Designed for 2003-2004 Mach 1 with a TR3650 Designed for 2003-2004 Cobra with a T-56 Disc Dimensions: 11" X 10T X 1-1/16" Torque Rating: 850 ft./lbs. Note: Because Ford made changes to the Mustang GT and Bullitt in mid year of 2001, be sure to check and see what kind of transmission type you have before ordering. Ford Mustang SPEC Clutches Stage 3 Plus Clutch - 60028 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 3 Plus Clutch - 60028 Fits: 2001-2004 Ford Mustang GT & Cobra & Mach 1 [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
05-09 Ford Mustang SPEC Clutches Stage 2 Clutch - 60021
$440.99
Has the modding bug bit you after you bought your 2005+ Mustang V6" Adding forced induction to this car is quite simple and creates massive horsepower and torque gains, but you have to safely control the power that is heading to your wheels. Thats where the SPEC Stage 2 Clutch comes in! Stage 2 Clutches are designed for all mild to moderately modified naturally aspirated and power adder engines, but can be used with stock power levels without sacrficing drivability or excessive wear characteristics. Each Stage 2 Clutch includes a high clamp pressure plate, pure Kevlar friction material and high torque sprung hub and disc assembly. SPEC even provides you with an alignment tool. Concerned about the clutch pedal being hard to push down? Well dont be, for SPEC designed this clutch to have stock-like daily drivability and wear characteristics that will make your clutch last longer so you wont have to replace it again! Technical Notes: The 2005+ Mustang uses a concentric slave cylinder instead of a conventional throwout bearing. Therefore this clutch kit will not include a throwout bearing. 2005 V6 applications can reuse the stock factory flywheel. 2006 V6 applications require the use of a SPEC flywheel part# SF66A. 2007-2009 V6 applications require the use of a SPEC flywheel part# SF66A-2. Features: Holds more Horsepower with a Lighter Pedal! Stock-Like Daily Driving Great Wear Characteristics Everything you need for Installation is included Ford Mustang SPEC Clutches Stage 2 Clutch - 60021 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 2 Clutch - 60021 Fits: 2005-2009 Ford Mustang V6 [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
93-98 Ford Mustang RAM Clutches HDX Clutch - 34000
$181.99
The RAM HDX Clutch kits are the performance upgrade for your daily driven Mustang. The HDX Mustang Clutch is designed for the 1996-2000 GT, 1993-1998 Cobra, and 1986-1995 5.0L Mustangs with the T-5 or T-45 transmission. The RAM HDX pressure plates feature increased clamp loads and 300 Series organic clutch disc. The 300 series consists of steel backed organic facing material that greatly increases rotational strength, and an eight spring center hub for excellent shock absorption. The RAM HDX Clutch kits are for Mustangs with bolt on mods and mild power enhancements this clutch is great for the street or strip. And if you are replacing your clutch it is also a good idea to replace your Clutch Cable and Quadrant at the same time to prolong the life of your new Clutch. Specifications: Fits: 1986-1995 5.0L with a T-5 or T-45 Fits: 1993-1998 Cobra with a T-5 or T-45 Fits: 1996-2000 GT with a T-5 or T-45 Disc Dimensions: 10-1/2" X 10T X 1-1/16" Horse Power Rating: 450 Includes: Pressure plate, clutch disc, release bearing, and alignment tool Note: Because Ford made changes to the Mustang GT and Bullitt in mid year of 2001, be sure to check and see what kind of transmission type you have before ordering. Ford Mustang RAM Clutches HDX Clutch - 34000 Professional Installation is Recommended. Ford Mustang RAM Clutches HDX Clutch - 34000 Fits: 1993-1998 Ford Mustang GT & Cobra [Read more]
Store: StreetBeatCustoms.com
Brand: RAM Clutches
|
|
94-04 Ford Mustang SPEC Clutches Stage 1 Clutch - 60000
$264.99
Have you driven your 5-Speed Mustang V6 like its supposed to be driven, hard and fast? Have hard launches taken a toll on your stock clutch? Well look no further for a replacement, for American Muscle is proud to offer SPEC clutches as a new addition to our product lineup! This SPEC Stage 1 Clutch is designed for bolt-on naturally aspirated and mildly modified forced induction engines. Concerned about the clutch pedal being hard to push down? Well don't be, for SPEC designed this clutch to have stock-like daily drivability and wear characteristics that will make your clutch last longer so you wont have to replace it again! This Stage 1 clutch has a high clamp pressure plate, steel-backed and multi-compound woven organic material and high torque sprung hub and disc assembly, bearing and tool kit. When looking for a new clutch, trust SPEC for the best in value and performance. And if you are replacing your clutch it is also a good idea to replace your Clutch Cable and Quadrant at the same time to prolong the life of your new Clutch. Torque Rating: 285 ft./lbs. Ford Mustang SPEC Clutches Stage 1 Clutch - 60000 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 1 Clutch - 60000 Fits: 1994-2004 Ford Mustang V6 [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
05-09 Ford Mustang SPEC Clutches Stage 3 Clutch - 60022
$318.99
Has the modding bug bit you after you bought your 2005+ Mustang GT? Adding forced induction to this car is quite simple and creates massive horsepower and torque gains, but you have to safely control the power that is heading to your wheels. Thats where the SPEC Stage 3 Clutch comes in! Stage 3 Clutches are designed for heavily modified street and race engines. The Stage 3 clutch offers sufficient daily drivability with a comfortable pedal feel and quick engagement. The Stage 3 clutch has good wear characteristics under low and high stress usage. This particular stage can hold up to 760 ft/lb of torque! Each Stage 3 Clutch includes a high clamp pressure plate 6 puck carbon semi-metallic friction with high torque sprung hub and disc assembly. SPEC even provides you with an alignment tool. Technical Note: The 2005+ Mustang uses a concentric slave cylinder instead of a conventional throwout bearing. Therefore this clutch kit will not include a throwout bearing. It is recommended to install a new SPEC flywheel with this replacement clutch for the 2005+ Mustang GT. Look at our flywheel page for these 2005+ steel and aluminum flywheels. Specifications: Fits 2005+ GT Mustangs Torque Rating: 760 ft./lbs. Ford Mustang SPEC Clutches Stage 3 Clutch - 60022 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 3 Clutch - 60022 Fits: 2005-2009 Ford Mustang GT [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
05-09 Ford Mustang SPEC Clutches Stage 1 Clutch - 60020
$382.99
Have you already burned out the clutch on your new monster machine known as the 2005+ Mustang V6" If you are looking for a replacement to hold more horsepower with a lighter pedal, then look no further, as SPEC delivers! This SPEC Stage 1 Clutch is designed for bolt-on naturally aspirated and mildly modified forced induction engines. Concerned about the clutch pedal being hard to push down? Well don't be, for SPEC designed this clutch to have stock-like daily drivability and wear characteristics that will make your clutch last longer so you wont have to replace it again! This Stage 1 clutch has a high clamp pressure plate, steel-backed and multi-compound woven organic material and high torque sprung hub and disc assembly, and includes the alignment tool. When looking for a new clutch, trust SPEC for the best in value and performance. Technical Notes: The 2005+ Mustang uses a concentric slave cylinder instead of a conventional throwout bearing. Therefore this clutch kit will not include a throwout bearing. 2005 V6 applications can reuse the stock factory flywheel. 2006 V6 applications require the use of a SPEC flywheel part# SF66A. 2007-2009 V6 applications require the use of a SPEC flywheel part# SF66A-2. Features: Holds more Horsepower with a Lighter Pedal! Stock-Like Daily Driving Great Wear Characteristics Everything you need for Installation is included Ford Mustang SPEC Clutches Stage 1 Clutch - 60020 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 1 Clutch - 60020 Fits: 2005-2009 Ford Mustang V6 [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
|
05-09 Ford Mustang SPEC Clutches Stage 3 Plus Clutch - 60024
$450.99
Has the modding bug bit you after you bought your 2005+ Mustang GT? Adding forced induction to this car is quite simple and creates massive horsepower and torque gains, but you have to safely control the power that is heading to your wheels. Thats where the SPEC Stage 3+ Clutch comes in! The Stage 3+ Clutches are designed for all modified street and race engines making more torque than the standard stage 3 can support. The Stage 3+ clutch offers good daily drivability and better manageability than the stage 3, with even better wear characteristics and provides a higher torque capacity. This particular stage can hold up to 850 ft/lb of torque! Each Stage 3+ Clutch includes a high clamp pressure plate, full-faced carbon metallic friction, high torque sprung hub and disc assembly. SPEC even provides you with an alignment tool. Technical Note: The 2005+ Mustang uses a concentric slave cylinder instead of a conventional throwout bearing. Therefore this clutch kit will not include a throwout bearing. It is recommended to install a new SPEC flywheel with this replacement clutch for the 2005+ Mustang GT. Look at our flywheel page for these 2005+ steel and aluminum flywheels. Specifications: Fits 2005+ GT Mustangs Torque Rating: 850 ft./lbs. Does not work on GT500 Ford Mustang SPEC Clutches Stage 3 Plus Clutch - 60024 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 3 Plus Clutch - 60024 Fits: 2005-2009 Ford Mustang GT [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
01-04 Ford Mustang RAM Clutches Powergrip Clutch - 34011
$352.99
The RAM Powergrip Clutch kits are the performance clutch for your street/strip Mustang. The Powergrip Mustang Clutch is designed for the 2001-2004 GT, 1999-2004 Cobra, 2001 Bullitt, and 2003-2004 Mach 1 with the T-45, TR-3650, or T-56 transmission. As your Mustangs engine power and torque levels increase, Powergrip Clutch kits meet the challenge. RAM Powergrip Mustang Clutch kits utilizes a unique blend of 900 and 300 series friction materials and increased clamp loads to give you the holding power needed for aggressive street driving, occasional drag strip use, and the all around performance you expect from your clutch system. Some chatter will occur on takeoff. Powergrip clutches are great for modified street/strip Mustangs. And if you are replacing your clutch it is also a good idea to replace your Clutch Cable and Quadrant at the same time to prolong the life of your new Clutch. Specifications: Fits: 2003-2004 Cobra with a T-56 Fits: 2003-2004 Mach 1 with a TR3650 Fits: 2001 Bullitt with a T-45 or TR3650 Fits: 2001-2004 GT with a T-45 or TR3650 Disc Dimensions: 11" X 10T X 1-1/16" Horse Power Rating: 550 Includes: Pressure plate, clutch disc, release bearing, and alignment tool Note: Because Ford made changes to the Mustang GT and Bullitt in mid year of 2001, be sure to check and see what kind of transmission type you have before ordering. Ford Mustang RAM Clutches Powergrip Clutch - 34011 Professional Installation is Recommended. Ford Mustang RAM Clutches Powergrip Clutch - 34011 Fits: 2001-2004 Ford Mustang GT & Cobra & Mach 1 & Bullitt [Read more]
Store: StreetBeatCustoms.com
Brand: RAM Clutches
|
94-04 Ford Mustang SPEC Clutches Stage 2 Clutch - 60004
$328.99
If you have added a forced induction setup to your V6, then you are going to want to upgrade your clutch from stock, as more horsepower and torque on a stock clutch could cause it to fail. A failing clutch is not good for a transmission, unless you plan on intentionally grenading your transmission and have the dough to put in a new one. This SPEC Clutch is rated for 370 ft/lb of torque, more than enough to keep that boosted motor under your hood tamed. Stage 2 Clutches are designed for all mild to moderately modified naturally aspirated and power adder engines, but can be used with stock power levels without sacrficing drivability or excessive wear characteristics. Each Stage 2 Clutch includes a high clamp pressure plate, pure Kevlar friction material and high torque sprung hub and disc assembly, bearing and tool kit. And if you are replacing your clutch it is also a good idea to replace your Clutch Cable and Quadrant at the same time to prolong the life of your new Clutch. Torque Rating: 370 ft./lbs. Ford Mustang SPEC Clutches Stage 2 Clutch - 60004 Professional Installation is Recommended. Ford Mustang SPEC Clutches Stage 2 Clutch - 60004 Fits: 1994-2004 Ford Mustang V6 [Read more]
Store: StreetBeatCustoms.com
Brand: SPEC Clutches
|
|
1998-2003 BMW 540i Clutch Installation Tool, 98-03 BMW 540i Luk Clutc
$19.95
New 1998-2003 BMW 540i Clutch Installation Tool, 98-03 Luk Clutch Installation Tool for BMW 540i. Clutch Installation Tool, 12-month Or 12,000-mile Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Luk Clutch Installation Tool
|
1996-2003 Hyundai Elantra Clutch Kit, 96-03 Hyundai Elantra Centerfor
$507.58
New 1996-2003 Hyundai Elantra Clutch Kit, 96-03 Centerforce Clutch Kit for Hyundai Elantra. Sprung Hub, Clutch Kit, Direct Fit, 90-day Centerforce Limited Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Centerforce Clutch Kit
|
2000-2000 BMW 323Ci Clutch Installation Tool, 00-00 BMW 323Ci Luk Clu
$15.95
New 2000-2000 BMW 323Ci Clutch Installation Tool, 00-00 Luk Clutch Installation Tool for BMW 323Ci. Clutch Installation Tool, 12-month Or 12,000-mile Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Luk Clutch Installation Tool
|
|
1980-1983 Jeep CJ5 Clutch Hose, 80-83 Jeep CJ5 Omix Clutch Hose
$32.81
New 1980-1983 Jeep CJ5 Clutch Hose, 80-83 Omix Clutch Hose for Jeep CJ5. Clutch Hose, OE Replacement, [Read more]
Store: Auto Parts Warehouse
Brand: Omix Clutch Hose
|
1983-1985 Honda Accord Clutch Kit, 83-85 Honda Accord Sachs Clutch Ki
$143.69
New 1983-1985 Honda Accord Clutch Kit, 83-85 Sachs Clutch Kit for Honda Accord. Sprung Hub, Clutch Kit, OE Replacement, 1-year Sach Limited Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Sachs Clutch Kit
|
1994-2000 Mazda B3000 Clutch Kit, 94-00 Mazda B3000 Valeo Clutch Kit
$206.95
New 1994-2000 Mazda B3000 Clutch Kit, 94-00 Valeo Clutch Kit for Mazda B3000. Clutch Kit, OE Replacement, 12-month Or 12,000-mile Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Valeo Clutch Kit
|
|
1986-1986 BMW 524td Clutch Kit, 86-86 BMW 524td Sachs Clutch Kit
$273.59
New 1986-1986 BMW 524td Clutch Kit, 86-86 Sachs Clutch Kit for BMW 524td. Sprung Hub, Clutch Kit, OE Replacement, 1-year Sach Limited Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Sachs Clutch Kit
|
2000-2001 Mazda B2500 Clutch Kit, 00-01 Mazda B2500 Sachs Clutch Kit
$119.99
New 2000-2001 Mazda B2500 Clutch Kit, 00-01 Sachs Clutch Kit for Mazda B2500. Sprung Hub, Clutch Kit, OE Replacement, 1-year Sach Limited Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Sachs Clutch Kit
|
1980-1983 Jeep CJ5 Clutch Kit, 80-83 Jeep CJ5 Sachs Clutch Kit
$134.80
New 1980-1983 Jeep CJ5 Clutch Kit, 80-83 Sachs Clutch Kit for Jeep CJ5. Sprung Hub, Clutch Kit, OE Replacement, 1-year Sach Limited Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Sachs Clutch Kit
|
|
2005-2007 Ford Mustang Clutch Kit, 05-07 Ford Mustang Fidanza Clutch
$297.23
New 2005-2007 Ford Mustang Clutch Kit, 05-07 Fidanza Clutch Kit for Ford Mustang. Sprung Hub, Clutch Kit, Direct Fit, 1-year Fidanza Limited Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Fidanza Clutch Kit
|
1991-1993 Nissan NX Clutch Cable, 91-93 Nissan NX Beck Arnley Clutch
$31.25
New 1991-1993 Nissan NX Clutch Cable, 91-93 Beck Arnley Clutch Cable for Nissan NXSE 4Cyl 1.6L. Clutch Cable, OE Replacement, [Read more]
Store: Auto Parts Warehouse
Brand: Beck Arnley Clutch Cable
|
2001-2003 Ford Explorer Clutch Kit, 01-03 Ford Explorer Sachs Clutch
$271.75
New 2001-2003 Ford Explorer Clutch Kit, 01-03 Sachs Clutch Kit for Ford ExplorerXLT 8Cyl 4.6L. Sprung Hub, Clutch Kit, OE Replacement, 1-year Sach Limited Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Sachs Clutch Kit
|
|
2005-2006 Scion tC Clutch Kit, 05-06 Scion tC Centerforce Clutch Kit
$473.86
New 2005-2006 Scion tC Clutch Kit, 05-06 Centerforce Clutch Kit for Scion tC. Sprung Hub, Clutch Kit, Direct Fit, 90-day Centerforce Limited Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Centerforce Clutch Kit
|
1988-1989 Dodge D100 Clutch Kit, 88-89 Dodge D100 Sachs Clutch Kit
$186.94
New 1988-1989 Dodge D100 Clutch Kit, 88-89 Sachs Clutch Kit for Dodge D100. Sprung Hub, Clutch Kit, OE Replacement, 1-year Sach Limited Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Sachs Clutch Kit
|
2000-2000 BMW 323Ci Clutch Kit, 00-00 BMW 323Ci Sachs Clutch Kit
$240.95
New 2000-2000 BMW 323Ci Clutch Kit, 00-00 Sachs Clutch Kit for BMW 323Ci. Clutch Kit, OE Replacement, 12-month Or 12,000-mile Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Sachs Clutch Kit
|
|
1999-2000 Honda Civic Clutch Kit, 99-00 Honda Civic ACT Clutch Kit
$382.17
New 1999-2000 Honda Civic Clutch Kit, 99-00 ACT Clutch Kit for Honda Civic. Sprung Hub, Clutch Kit, Direct Fit, 90-day Act Limited Warranty [Read more]
Store: Auto Parts Warehouse
Brand: ACT Clutch Kit
|
1996-2003 Chevrolet S10 Clutch Kit, 96-03 Chevrolet S10 Valeo Clutch
$150.95
New 1996-2003 Chevrolet S10 Clutch Kit, 96-03 Valeo Clutch Kit for Chevrolet S10LS 4Cyl 2.2L. Clutch Kit, OE Replacement, 12-month Or 12,000-mile Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Valeo Clutch Kit
|
1991-1992 Ford Explorer Clutch Kit, 91-92 Ford Explorer Sachs Clutch
$183.50
New 1991-1992 Ford Explorer Clutch Kit, 91-92 Sachs Clutch Kit for Ford ExplorerXLT 8Cyl 4.6L. Sprung Hub, Clutch Kit, OE Replacement, 1-year Sach Limited Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Sachs Clutch Kit
|
|
2005-2005 Audi S4 Clutch Kit, 05-05 Audi S4 Luk Clutch Kit
$207.95
New 2005-2005 Audi S4 Clutch Kit, 05-05 Luk Clutch Kit for Audi S4Base 6Cyl 2.7L. Clutch Kit, 12-month Or 12,000-mile Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Luk Clutch Kit
|
2001-2002 Mazda Protege Clutch Kit, 01-02 Mazda Protege Sachs Clutch
$165.23
New 2001-2002 Mazda Protege Clutch Kit, 01-02 Sachs Clutch Kit for Mazda Protege. Sprung Hub, Clutch Kit, OE Replacement, 1-year Sach Limited Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Sachs Clutch Kit
|
1995-2000 Ford Ranger Clutch Kit, 95-00 Ford Ranger Sachs Clutch Kit
$187.42
New 1995-2000 Ford Ranger Clutch Kit, 95-00 Sachs Clutch Kit for Ford RangerXLT 6Cyl 3.0L. Sprung Hub, Clutch Kit, OE Replacement, 1-year Sach Limited Warranty [Read more]
Store: Auto Parts Warehouse
Brand: Sachs Clutch Kit
|
|
1997-2001 Jeep Cherokee Clutch Fork, 97-01 Jeep Cherokee Crown Clutch
$19.25
New 1997-2001 Jeep Cherokee Clutch Fork, 97-01 Crown Clutch Fork for Jeep CherokeeBase 4Cyl 2.5L. Clutch Fork, OE Replacement, [Read more]
Store: Auto Parts Warehouse
Brand: Crown Clutch Fork
|
Perfection Clutch TECHnovation Clutch Master Cylinder - 350010
$55.99
Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: Perfection Clutch
|
1991-1995 Jeep Wrangler Clutch Master Cylinder, 91-95 Jeep Wrangler C
$87.22
New 1991-1995 Jeep Wrangler Clutch Master Cylinder, 91-95 Crown Clutch Master Cylinder for Jeep WranglerBase 6Cyl 4.2L. Clutch Master Cylinder, Sold Individually, OE Replacement, [Read more]
Store: Auto Parts Warehouse
Brand: Crown Clutch Master Cylinder
|
|
ATP Clutch Cable - Y-598
$14.79
MPN #Y-598. ATP Clutch Cable. Most Clutch Parts products are available for in-store pickup from Advance Auto Parts. [Read more]
Store: Advance Auto Parts
Brand: ATP
|
|
|
![Clutch Masters Clutch Kits - Stage 4 (FX400) [89-96 Nissan 300ZX 3.0L 6Cyl.]](http://www.andysautosport.com/images/clutch_masters/cmstage4.gif)
![Clutch Masters Clutch Kits - Stage 2 (FX200) [91-98 Nissan 240SX 2.4L 4Cyl.]](http://www.andysautosport.com/images/clutch_masters/cmstage2.gif)
![Clutch Masters Clutch Kits - Stage 3 (FX300) [04 Subaru Impreza WRX STI 2.5L]](http://www.andysautosport.com/images/clutch_masters/cmstage3.gif)
![Clutch Masters Clutch Kits - Stage 5 (FX500) [02-03 Subaru Impreza WRX 2.0L 4Cyl.]](http://www.andysautosport.com/images/clutch_masters/cmstage5.gif)
