Kohler 6.5 HP Horizontal Engine - 196cc, 3/4in. x 2 7/16in. Shaft, Model# PA-SH265-0011

$229.99

This Kohler horizontal engine is an excellent choice for log splitters, pressure washers and more. Engine Displacement (cc): 196, Start Type: Recoil, Application: Tillers, log splitters, pressure washers, compressors, cement mixers, tampers, construction equipment and more, Engine Type: OHV, Rated Power (HP): 6.5, Torque (ft./lbs.): 9.1, Displacement (cu. in.): 12.7, Shaft Output: CCW, Crankshaft: Hardened, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2.42, Shaft Keyway (in.): 3/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 / 24, Shaft Rotation (From PTO Shaft Side): CCW, PTO Height (in.): 4.173, Bearing Type: Dual Ball bearings, Cylinders (qty.): 1, Cylinder Bore: 2.8, Bore x Stroke (in.): 2.8 x 2.1, Compression Ratio: 8.5: 1, Cooling System: Air, Air Cleaner Type: Cyclonic, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 4.3, Fuel Filter: Yes, Oil Capacity (qt.): 0.63, Lubrication System: Splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float with bowl drain, Throttle Control: Engine-mounted, Choke System: Engine-mounted, Max. RPM: 3,600, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 3.625, Mounting Base L x W (in.): 6.378 x 3.149, Mounting Bolt Pattern L x W (in.): 6.378 x 3.149, Dimensions L x W x H (in.): 12.7 x 14.7 x 14, EPA/CARB Approval (California Air Resource Board): Yes Large muffler for quiet operation Large metal fuel tank with metal cap Low oil alert Dual air drains [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Generac Portable Generator - 10,000 Surge Watts, 8000 Rated Watts, 410cc Generac OHVI Engine with Electric Start, Model# 5747

$1,599.98

Take this powerful Generac Portable Generator to your work site, camping ground or construction zone for a power source that you can rely on. U.S.A. Surge Watts: 10,000, Rated Watts: 8,000, Start Type: Electric with recoil backup, Engine Displacement (cc): 410, Engine: Generac OHVI, Run Time: 10 hrs. @ 1/2 load, Receptacles (qty.): 5, Fuel Type: Gasoline, Fuel Capacity (gal.): 9, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 35 1/2 x 25 x 27 Five circuit breaker-protected receptacles: four 5-20R CGFI and one 120V/240V L14-30R locking plug Includes battery, wheel kit, handles, first oil supply and maintenance kit [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Husqvarna HU700L 3-in-1 Lawn Mower - 160cc Honda GCV160 Engine, 22in. Deck, Model# HU700L

$349.98

The Husqvarna HU700L 3-in-1 Lawn Mower has side discharge, rear bag and mulching functions to take care of all kinds of jobs. Rear wheel drive for better traction in high grass. U.S.A. Engine: Honda GCV160, Engine Displacement (cc): 160, Drive: Rear, Cutting Height (in.): 1 1/2 - 3 1/2, Cutting Styles: 3 in 1, Cutting Speeds: Variable, Cutting Width (in.): 22, Bagger Volume (bushels): 2, Deck Material: Steel, Front Tire Size (in.): 8, Rear Tire Size (in.): 8 Ergonomic handle folds for transport or storage Deck washout port [Read more]

Store: Northern Tool and Equipment

Brand: Husqvarna

Husqvarna Push Mower - 160cc Honda GCV Engine, 21in. Steel Deck, Model# 7021P

$279.98

Sure you hate to mow the lawn. This lawn mower wont change that. But it will give you the best cut lawn on the block. Why not make the best of things? U.S.A. Engine: Honda GCV160, Engine Displacement (cc): 160, Gross Torque: 6.9, Drive: Push, Cutting Height (in.): 1 1/2 - 3 1/2, Cutting Width (in.): 21, Bagger Volume (bushels): 2, Deck Material: Steel, Front Tire Size (in.): 8, Rear Tire Size (in.): 12, Dimensions L x W x H (in.): 40 x 25 1/4 x 17 3/4 Side discharge, 2-bushel rear bag and mulching Double ball bearings for a smooth roll Folding handle for transport and storage 2 blades with electric PTO control [Read more]

Store: Northern Tool and Equipment

Brand: Husqvarna

StormForce Electric Start Snow Blower Engine - 208cc, OHV, 9.5 Ft-Lbs. Torque

$334.98

This StormForce electric start 208cc OHV engine, model PW1HK650178E-ABGOQUVE1S, is an ideal replacement for your tired old 6.5 HP snow blower engine. Displacement (cc): 208, Application: Snowblower, Torque (ft./lbs.): 9.5, Engine Type: OHV, Start Type: 120VAC electric start with recoil backup, Shaft Dimensions Diameter x L (in.): 3/4 x 2 27/64, Mounting Base L x W (in.): 6.38 x 3.05, Bolt Circle (in.): 3 5/8 Industrial cast iron sleeve Dual ball bearing; forged crankshaft Oversized starting grip and fuel cap Patented design of controls for easy use with gloves Safety key switch; primer bulb High oil fill Extended oil drain pipe Replacement engine for snow blowers [Read more]

Store: Northern Tool and Equipment

Brand: Stormforce

Swisher Lawn Vac - 205cc Briggs & Stratton Engine, 51 Cubic Ft, Model# LV87551

$1,249.98

This Swisher Lawn Vac can clear a lawn of leaves without spending hours raking. Swishers Lawn Vac is perfect for a variety of chores around your property. Pull it behind your lawn tractor to pick up leaves and debris. The Lawn Vac is designed to save you from back-breaking chores, and may even let you have some fun while you work. Item is on backorder until mid-March. Mower Type: Lawn vacuum, Application: Pull-behind, Air Velocity (MPH): 180, Air Volume (CFM): 6,000, Engine Type: Briggs & Stratton 900-series OHV, Hose Length (in.): 84, Hose Length (ft.): 7, Vacuum Hose Diameter (in.): 6, Discharge Chute Material: HDPE 550-80, Housing Material: Cloth bag, Overall Dimensions L x W x H (in.): 99 x 43 1/2 x 64, Mounting Type: Hitch pin Briggs & Stratton 205cc 900-series engine 9 ft-lbs. Gross Torque 51 cu. ft. capacity Compatible with mowers that have a 60in. or smaller deck with right-side discharge and 1000-lb. towing capacity Converts to durable polyethylene trailer with easy-to-use dump feature [Read more]

Store: Northern Tool and Equipment

Brand: Swisher

STANLEY Heavy-Duty Brush Mower - 20 HP Kawasaki FR-600V Engine, 36in. Steel Deck, Model# 36BSK

$3,099.98

An electric start 20 HP Kawasaki FR-600V engine gives this STANLEY Brush Mower excellent power and performance. Cuts tall grasses and thickets into a 4in. finish cut appearance in a single pass. Dual break-away blades act like battering axes to cut stumps up to 4in. in dia. and 4in. x 20in. trees. Ideal for landscapers, large lot owners, hunting clubs, grounds keepers and parks departments. U.S.A. Engine: Kawasaki FR600V, HP: 20, Engine Displacement (cc): 603, Gross Torque: 37.5 ft-lbs, Drive: Hydrostatic, Cutting Height (in.): 4, Cutting Styles: Brush, Cutting Speeds: Variable, Cutting Width (in.): 36, Max. Cutting Speed (MPH): 8, Deck Material: 6-ga. steel, Rear Tire Size (in.): 16, Dimensions L x W x H (in.): 82 x 39 x 43 Break-away blades on a 50-lb. flywheel Front discharge for added safety Optional finish kit available [Read more]

Store: Northern Tool and Equipment

Brand: Stanley

Briggs & Stratton Home Standby Generator with Vanguard Engine - 15 kW, Model# 40303

$3,999.98

Whether you are home or away, the Briggs & Stratton Home Standby Generator will provide fully automatic operation and a permanent connection to natural gas or propane during a power outage. Design is half the size, sound, fuel consumption and price of most competitive systems. U.S.A. Engine: Vanguard, Engine Displacement (cc): 895, Rated Watts LP (kW): 15, Rated Watts NG (kW): 14, Surge Watts LP (kW): 18.5, Surge Watts NG (kW): 17, Volts: 120/240, Amps: 125/62.5 LP, 116.7/58.3 NG, Fuel Type: Propane or Natural gas Air conditioning control module (ACCM) can manage up to two 5-ton air conditioner units and homes entire panel (load dependent) when partnered with Briggs & Stratton transfer switch Item#s 213286 or 213287 Hour meter Includes hardwired remote system status indicator Fuel consumption @ 1/2 load: 1.56 gallons/hr. (LP); 126,000 BTU/hr (NG) Synthetic oil in the crankcase Standby generators require installation involving permanent outdoor placement, electrical wiring and fuel source connections. We recommend the use of a trained professional for final connections of gas and electric Generator sales are final [Read more]

Store: Northern Tool and Equipment

Brand: Briggs & Stratton

NorthStar- Generator Head - 3500 Surge Watts, 3000 Rated Watts, J609A Engine Adaption

$199.99

This NorthStar 3000 Watt generator head is designed as a replacement for portable electric generators that are powered by a 6 HP gas engine and require a J609A engine adaption. Brushless generator heads are proven to be superior in efficiency, performance and lifespan compared to brush-style generator heads. Engine Required: 5.5-6 HP (3600 RPM), Shaft Diameter (in.): 25/32, Rated Watts: 3,000, Surge Watts: 3,500, Dimensions L x W x H (in.): 11 x 7 1/8 x 7 3/4 Brushless design with high quality copper windings 25 Amps @ 120V; 12.5 Amps @ 240V SAE J609A engine adaption 3 5/8in. bolt hole circle with 4 mounting holes 45 off vertical 1.625in. center pilot 25/32in. engine shaft diameter x 2 53/64in. shaft length with taper of 2.25in./ft. Includes generic wiring harness Will fit Honda GC160VHA, GC160VXA, GX160VX and GX160VXW engines Fits engine Item#s 605941, 605921 Fits generator Item# 165912 May fit many U.S. manufactured generators with Briggs & Stratton, Kohler, Tecumseh or Honda engines Replacement parts available from Northern or a Northern retail store [Read more]

Store: Northern Tool and Equipment

Brand: NorthStar

Generac Portable Generator - 10,000 Surge Watts, 8000 Rated Watts, 410cc Generac OHVI Engine, Model# XG8000

$1,499.98

This Generac Portable Generator doesnt skimp on power for portability. Great for work sites were you need lots of power that you can count on. Keeps things running during a emergency too. U.S.A. Surge Watts: 10,000, Rated Watts: 8,000, Start Type: Recoil, Engine Displacement (cc): 410, Engine: Generac OHVI, Run Time: 10 hrs. at 1/2 load, Receptacles (qty.): 5, Fuel Type: Gasoline, Fuel Capacity (gal.): 9, Low Oil Shutdown: Yes, Battery Required: No, Battery Included: No, Dimensions L x W x H (in.): 34 1/2 x 25 x 27 Five circuit breaker-protected receptacles: four 5-20R CGFI and one 120V/240V L14-30R locking plug Includes wheel kit, handles, maintenance kit and first oil supply [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Kohler Diesel Engine - 401cc, 1in. x 3.62in. Shaft, Model# KD400

$1,899.98

This Kohler diesel engine is designed for use on all belt-driven and some direct coupled applications. Displacement (cc): 401, HP: 9.8, Torque (ft./lbs.): 16.6, Engine Type: 4 Stroke single cylinder, Shaft Dimensions Diameter x L (in.): 1 x 3.62, Shaft Keyway (in.): 3/4 4-stroke, single cylinder engine for belt driven applications 9.8 HP historical rating 16.6 ft-lbs. of torque 1in. x 3.62in. 3/4in. keyed shaft Full-pressure lubrication provides superior cooling and performance for longer component life Full-flow oil filters ensure longer engine life in tough environments Aluminum block with integrated re-borable cast-iron liner Counterbalanced crankshaft allows for lower vibration and reduced sound levels Direct injection for superior combustion, increased power and lower fuel consumption Model KD400 [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 5/16in-24 tap x 3in. taper, Model# GX630RVXE1

$1,299.98

With experience born on the raceways and roadways and a dedication to innovation, there s plenty of reasons to insist on the new Honda GX630 V-Twin engine. There s superior engine design, with a 90 configuration that reduces vibration and allows a compact footprint. There s superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. There s a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. There s even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. What better reason do you need? Engine Displacement (cc): 630, Start Type: Electric, Shift type, Application: Generators, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 20.3, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: V type, Shaft Diameter (in.): (tapered), Shaft Length (in.): 3, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 3, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 7/8 x 16 1/8 x 17 3/16, EPA/CARB Approval (California Air Resource Board): Yes Generator tapered shaft 630cc air-cooled, 4-stroke OHV engine [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with 2:1 Gear Reduction - 160cc, GX Series, 22mm x 2 3/32in. Shaft, Model# GX160UT1RH2

$569.98

The Honda 160cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pumps, pressure washers and go-karts. This engine has super hill climbing power for go-karts. Engine Displacement (cc): 160, Start Type: Recoil, Application: Pumps, pressure washers, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 4.8, Torque (ft./lbs.): 7.60 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: R type, Shaft Diameter (in.): 7/8 (22mm), Shaft Length (in.): 2 3/32, Shaft Keyway (in.): 3/16, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: R type 2:1 with wet clutch, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 1.8, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Alert: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (standard), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Tanaka Chain Saw - 16in. Bar, 32cc Engine, Model# TCS33EB/16

$239.99

This chain saw is perfect for anything from general cutting to light-duty pruning and even carving a masterpiece. Excellent power to weight, provided by a 32.2cc commercial-grade PureFire 2-stroke engine. 5-pt. anti-vibration system makes it easier to work long jobs. Chain Saw Type: Gas, Engine Displacement (cc): 32, Bar Length (in.): 16, Fuel Capacity (oz.): 13.44, Chain Brake: Yes, Low Vibration Handle: Yes, Tool Weight (lbs.): 8.4 16in. Oregon chain and bar Two bar mounting studs Inertia-activated chain brake Side-access chain tensioner [Read more]

Store: Northern Tool and Equipment

Brand: Tanaka

Brinly-Hardy Poly Lawn Vac System - 205cc Briggs & Stratton OHV Engine, 33 Cubic Ft. Capacity, Model# LVS-33BH

$1,199.98

The two biggest problems with most lawn vac systems are easy clogging and difficult emptying. This lawn vac system is the solution, thanks to a high-CFM, 205cc Briggs & Stratton I/C OHV engine with 8.75in-lbs. gross torque and large-diameter 8in. Spiro-flex hoses that allow high-performance when working with wet grass and leaves. U.S.A. Application: Pull-behind, Vacuum Hose Diameter (in.): 8 Unique clamshell design dumps quickly with no need to remove a tailgate or get on your knees to empty 500-lb, 33 cu. ft. collection capacity 15in. tires for tow-behind ease Hitch pin included Ventilated mesh top minimizes dust and debris Made of UV-resistant material [Read more]

Store: Northern Tool and Equipment

Brand: Brinly-Hardy

Husqvarna Self-Propelled Lawn Mower - 22in. Deck, 173cc Kohler Engine, Model# XT722FE

$309.98

This Husqvarna self-propelled lawn mower makes mowing the lawn a walk in the park. The 22in. blade is powered by a 173cc Kohler XT-7 engine with electric start. U.S.A. Engine: Kolher XT-7, Engine Displacement (cc): 173, Drive: Variable speed front drive, Cutting Height (in.): 1 1/2 - 3 1/2, Cutting Styles: 3 in 1, Cutting Width (in.): 22, Bagger Volume (bushels): 2, Deck Material: Steel, Front Tire Size (in.): 8, Rear Tire Size (in.): 8, Dimensions L x W x H (in.): 36 1/4 x 25 1/4 x 20 3/4 3-in-1 mulch with 2-bushel rear bag and side discharge [Read more]

Store: Northern Tool and Equipment

Brand: Husqvarna

Husqvarna CRT900LS Rear Tine Tiller - 160cc Honda GCV160 Engine, 17in. Tilling Width

$999.98

This tillers high-speed counter-rotating agricultural tines make light work of your toughest yard projects. It s perfect for preparing large flowerbeds and vegetable gardens. Heavy-tread ag. tires for grip in both cultivated and muddy soil. Application: Tiller, Working Width (in.): 17, Engine: Honda, Engine Type: GCV160, Displacement (cc): 160, Torque (ft./lbs.): 4.6, Overall Width (in.): 18 3/4, Tines (qty.): 10, Tine Type: Rear, Disc Diameter (in.): 17, Disc Type: Rear, Depth (in.): 6 1/2 Easy-adjust drag bar for balance in different working conditions [Read more]

Store: Northern Tool and Equipment

Brand: Husqvarna

Yard-Man Riding Lawn Mower - 38in. Deck, 12 1/2 HP Engine, Model# 13AC760F055

$869.00

This powerful riding lawn mower has an electric start and drives up to 5 1/2 MPH, so youll be able to finish the lawn quickly. U.S.A. Engine: Briggs & Stratton, HP: 12 1/2, Cutting Width (in.): 38, Cutting Height (in.): 1 - 4, Cutting Styles: Side discharge, Start Type: Electric, Transmission: 6-speed, Blade Engage Control: Manual lever, Deck Lift: Manual lever, Turning Radius (in.): 18, Blades (qty.): 2, Fuel Capacity (gal.): 1 1/2, Forward Speeds: 6, Reverse Speeds: 7, Max. Forward Speed (MPH): 5.5, Deck Construction: Steel, Steering Type: Manual, Front Tire Size (in.): 13 x 5, Rear Tire Size (in.): 18 x 6 1/2, Dimensions L x W x H (in.): 61 x 43 x 35 1/2 6 forward speeds, 2 reverse [Read more]

Store: Northern Tool and Equipment

Brand: Yardman

Honda Self-Propelled Steel Deck Lawn Mower - 21in.W Deck, GCV160 Engine, Model# HRS216K4PDA

$389.98

Be the envy of the neighborhood with this Honda Lawn Steel Deck Mower. The 21in.W durable steel deck gives you mulching and side discharge options. 2 1/2 MPH self-propelled drive makes the job go fast. U.S.A. Engine: GCV160, HP: 5 1/2, Engine Displacement (cc): 160, Drive: Single speed, Cutting Height (in.): 1 - 3 1/2, Cutting Styles: Mulch / discharge, Cutting Speeds: 1, Cutting Width (in.): 21, Max. Cutting Speed (MPH): 2 1/2, Deck Material: Steel, Front Tire Size (in.): 8, Rear Tire Size (in.): 8 Six-position height adjustment from 1in. to 3 1/2in.H Single high lift blade with flywheel brake Ball bearing rear wheels 7/8in. steel tube handle [Read more]

Store: Northern Tool and Equipment

Brand: Honda Lawn & Garden

Yard-Man Backpack Blower - 450 CFM, 26cc 2-Cycle Engine, Model# YM2BP

$189.99

Do some heavy-duty fall cleaning with this 450 CFM Yard-Man backpack blower. Its 26cc 2-cycle engine gets air going up to 150 MPH and starts easily, thanks to advanced ignition technology. The padded multi-point harness suspension system and hip belt with mesh back distribute weight evenly between shoulders and hips, giving you the comfort to keep working on long jobs. Blower Type: Backpack, Cylinder Displacement (cc): 26, Air Velocity (MPH): 150, Air Volume (CFM): 450, Tool Weight (lbs.): 20 [Read more]

Store: Northern Tool and Equipment

Brand: Yardman

Yard-Man Blower/Vacuum - 31cc 2-Cycle Engine, 405 CFM, Model# YM320BV

$129.99

This combo vacuum/blower moves air at 200 MPH or 405 CFM to quickly clean up leaves and other yard debris. The MTD 2-cycle engine features advanced starting technology to give you easy pulls. Vacuum kit with 10:1 material reduction ratio. Blower Type: Hand held, Cylinder Displacement (cc): 31, Air Velocity (MPH): 200, Air Volume (CFM): 405, Tool Weight (lbs.): 20 [Read more]

Store: Northern Tool and Equipment

Brand: Yardman

Generac Portable Generator - 10,000 Surge Watts, 8000 Rated Watts, 410cc Generac OHVI Engine, Model# 5846

$1,699.98

This Generac portable generator features rally-style wheels to allow you to bring the power anywhere you need it. Electric start with battery included. Illuminated control panel for gives you improved visibility and PowerBar monitors watt usage. Durable full-wrap, heavy duty frame tubing and heavy-duty, never flat rally-style wheels. U.S.A. Item is on backorder until early mid-May. Surge Watts: 10,000, Rated Watts: 8,000, Start Type: Electric, Engine Displacement (cc): 410, Engine: Generac OHVI, Run Time: 10 hrs. @ 1/2 load, Receptacles (qty.): 5, Fuel Type: Gasoline, Fuel Capacity (gal.): 9, Low Oil Shutdown: Yes, Battery Required: Yes, Battery Included: Yes, Dimensions L x W x H (in.): 31 1/2 x 25 1/2 x 28 Includes rally-style wheels, handles, maintenance kit and first oil supply Hour meter with maintenance resets Covered outlets for protection from the elements [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Core Power- Air-Cooled Automatic Standby Generator - 7kW (LP), 6kW (NG), Generac OHV Engine, Model# 5837

$1,899.98

24/7 automatic power protection has never been more affordable. Core Power provides backup power to 8 essential circuits within seconds of a power outage. Weather-proof composite enclosure is ideal for both coastal and in-land areas. Permanently installed standby generator runs on LP or natural gas. Includes composite mounting pad and flexible fuel line connector to simplify installation. Handsfree operation: no fueling, no manual starting, no extension cords. Compact design for easy serviceability. Includes 50 Amp automatic transfer switch with 8-circuit load center. Engine: Generac OHV, Engine Displacement (cc): 420, Rated Watts LP (kW): 7, Rated Watts NG (kW): 6, Volts: 240, Engine Cooling: Air cooled, Start Type: Automatic, Phase: Single, Transfer Switch: 50 Amp, 8-circuit load center, Fuel Type: Liquid propane, natural gas, Enclosure: Composite polymer, Mounting Pad: Included, Battery Required: Yes, Battery Included: No, Auto Shutdown: Yes, UL Listed: UL 2200, Dimensions L x W x H (in.): 24 x 30 x 33 Low oil pressure, overspeed, high temperature and overload auto shutdown for safety [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Larin Mobile Engine Testing Station

$519.98

A must-have for automotive shops, racing teams, school bus fleets and hot rod enthusiasts. The multipurpose engine testing station is ideal for leak detection, engine break-in, assembly and detailing. Item is on backorder until mid-February. Application: Engine testing, LCD Display: No, Battery Required: No Tachometer Engine temperature gauge Oil pressure gauge 1-gallon fuel tank 4 steel casters Heavy-duty, powder-coated steel frame with console and battery tray [Read more]

Store: Northern Tool and Equipment

Brand: Larin

Imperial Industrial Commercial Generator - 6500 Surge Watts, 5500 Rated Watts, 13 HP OHV Engine with Electric Start, Model# XP6500E

$899.98

This powerful generator creates the electricity you need to finish your projects with a 13 HP OHV engine with electric start. Item is currently on backorder with the manufacturer. Surge Watts: 6,500, Rated Watts: 5,500, Start Type: Electric, HP: 13, Engine: OHV, Run Time: 8 hrs. @ 1/2 load, Receptacles (qty.): 4, Fuel Type: Gasoline, Fuel Capacity (gal.): 7, Low Oil Shutdown: Yes, Battery Required: Yes, Battery Included: Yes Four 120V, 20 Amp GFCI receptacles; one 120V/240V, 30 Amp locking plug and one 12V DC battery charger Muffler reduces engine noise Includes battery, wheel kit and handle kit EPA and CARB approved [Read more]

Store: Northern Tool and Equipment

Brand: DuroMax

Kohler Four-Stroke Diesel Engine - 25.2 HP, Group 8 Interchange Shaft, Model# PA-KD62525002

$4,999.99

This Kohler Four-Stroke, Two Cylinder Engine is designed for use in belt-driven applications, such as tractors, ag. mowers, water pumps, generators and more. Features full-pressure lubrication for longer life through superior cooling and performance. Direct injection for top-tier combustion, increased power and lower fuel consumption. Displacement (cc): 1,248, HP: 25.2, Torque (ft./lbs.): 55.3, Shaft Output: CCW, Engine Type: Diesel, Start Type: Electric, Mounting Base L x W (in.): 21.33 x 15.82, Bolt Circle (in.): 11.45, PTO Height (in.): 2.36, Max. RPM: 3,000, Charging System Amps: 14, Cylinders (qty.): 2, Fuel Tank Capacity (qt.): 10.6, Oil Capacity (qt.): 2.8, Bore x Stroke (in.): 3.7 x 3.5, Dimensions L x W x H (in.): 24 15/16 x 22 x 23 5/8 Full-flow oil filters ensure longer engine life in tough environments Aluminum block with integrated re-borable cast-iron liner Counterbalanced crankshaft allows for lower vibration and reduced sound levels [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Generac Portable Generator - 8000 Surge Watts, 6500 Rated Watts, 389cc Generac OHVI Engine, Model# 5700

$1,049.98

This Generac Portable Generator doesnt skimp on power for portability. Great for work sites were you need lots of power that you can count on. Keeps things running during a emergency too. U.S.A. Surge Watts: 8,000, Rated Watts: 6,500, Start Type: Recoil, Engine Displacement (cc): 389, Engine: Generac OHV, Run Time: 10 hrs. at 1/2 load, Receptacles (qty.): 5, Fuel Type: Gasoline, Fuel Capacity (gal.): 6.6, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 33 1/2 x 26 1/2 x 27 Five circuit breaker-protected receptacles: four 5-20R CGFI and one 120V/240V L14-30R locking plug Includes 9 1/2in. wheel kit, handles and first oil supply [Read more]

Store: Northern Tool and Equipment

Brand: Generac

NorthStar- Generator Head - 4500 Surge Watts, 4000 Rated Watts, J609B Engine Adaption

$249.99

This NorthStar 4500 Watt generator head is designed as a replacement for portable electric generators that are powered by an 9 HP gas engine and require a J609B engine adaption. 100% copper-wound brushless design for years of long-lasting power. Brushless generator heads are proven to be superior in efficiency, performance and lifespan compared to brush-style generator heads. Engine Required: 9 HP, Shaft Diameter (in.): 7/8, Rated Watts: 4,000, Surge Watts: 4,500, Dimensions L x W x H (in.): 12 1/4 x 7 1/2 x 7 5/8 Brushless design with high quality copper windings 33.3 Amps @ 120V; 16.7 Amps @ 240V SAE J609B engine adaption 6 1/2in. bolt hole circle with 2 upper mounting holes 30 off vertical; 45 off vertical for 2 lower mounting holes 5 3/4in. center pilot 7/8in. engine shaft diameter x 4 5/16in. shaft length with taper of 2 1/4in./ft. Includes generic wiring harness Will fit Honda GX240VA and GX270VA engines Fits engine Item# 60867 Fits generator Item#s 165911, 165926 and 165958 May fit many U.S. manufactured generators with Briggs & Stratton, Kohler, Tecumseh or Honda engines Replacement parts available from Northern or a Northern retail store [Read more]

Store: Northern Tool and Equipment

Brand: NorthStar

Generac Guardian Series Air-Cooled Automatic Standby Generator - 8kW (LP), 7kW (NG), Generac OHV Engine, Model# 5870

$2,299.98

24/7 automatic power protection has never been more affordable. Guardian Series provides backup power to 10 essential circuits within seconds of a power outage. Weather-proof composite enclosure is ideal for both coastal and in-land areas. Permanently installed standby generator runs on LP or natural gas. Includes composite mounting pad and flexible fuel line connector to simplify installation. Handsfree operation: no fueling, no manual starting, no extension cords. Compact design for easy serviceability. Includes 100 Amp automatic transfer switch with 10-circuit load center. Engine: Generac OHVI, Engine Displacement (cc): 410, Rated Watts LP (kW): 8, Rated Watts NG (kW): 7, Volts: 120 / 240, Amps: 33.3 LP / 29.2 NG, Engine Cooling: Air cooled, Start Type: Automatic, Phase: Single, Noise Level (dB): 62, Transfer Switch: 100 Amp automatic with 10 circuits, Fuel Type: Liquid propane, natural gas, Enclosure: Steel, Mounting Pad: Included, Battery Required: Yes, Battery Included: No, Auto Shutdown: Yes, Safety Alerts: Yes, UL Listed: Yes, Dimensions L x W x H (in.): 48 x 25 x 29 Low oil pressure, overspeed, high temperature and overload auto shutdown for safety [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Imperial Industrial Commercial Generator - 8500 Surge Watts, 7000 Rated Watts, 16 HP OHV Engine with Electric Start, Model# XP8500E

$899.98

This powerful generator creates the electricity you need to finish your projects with a 16 HP OHV engine with electric start. Surge Watts: 8,500, Rated Watts: 7,000, Start Type: Electric and recoil, HP: 16, Engine: Air-cooled OHV, Run Time: 12 hrs. @ 1/2 load, Receptacles (qty.): 4, Fuel Type: Gasoline, Fuel Capacity (gal.): 7, Low Oil Shutdown: Yes, Battery Required: No, Battery Included: Yes Four 120V, 20 Amp GFCI receptacles; one 120V/240V, 30 Amp locking plug and one 12V DC battery charger Muffler reduces engine noise Includes battery, wheel kit and handle kit EPA and CARB approved [Read more]

Store: Northern Tool and Equipment

Brand: DuroMax

Briggs & Stratton Intek Snow Horizontal Engine - 205cc, 1in. x 2 27/64in. Shaft, Model# 12D412-0009-E1

$449.98

Briggs & Stratton 205cc Intek Snow Horizontal Engine. Intek engines are designed and built to provide the highest level of performance and power available. Compact OHV design increases engine efficiency and valve life. Aluminized Lo-Tone muffler offers superior sound reduction and corrosion resistance. This engine has large displacement for increased torque and easy removal of wet heavy snow. Freeze resistant recoil starter provides smooth easy starts. Ergonomically designed rewind handle and controls for easy use in cold, snowy weather. Computer optimized snow hood maintains constant carburetor and engine temperatures to optimize cold-weather performance and prevent freeze-up. U.S.A. Displacement (cc): 205, HP: 7.5, Application: Snow Blowers, Torque (ft./lbs.): 9.0, Shaft Output: Horizontal, Engine Type: Snow - OHV, Start Type: Recoil, Shaft Dimensions Diameter x L (in.): 1 x 2 27/64, Mounting Base L x W (in.): 6.38 x 3.12, Bolt Circle (in.): 3 5/8, PTO Height (in.): 4.17, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8-24, Max. RPM: 3,600, Ignition System: Magnetron Electronic, Cylinders (qty.): 1, Fuel Tank Capacity (qt.): 4, Oil Capacity (qt.): 18-20 oz, Muffler Included: Yes, Low Oil Alert: No, Lubrication System: Splash type, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 2.69 x 2.2, Cylinder Bore: Cast iron, Cooling System: Air Cooled, Carburetor: Float, Fuel Pump: No, Governor System: Mechanical, Auto Compression Release: Yes, Dimensions L x W x H (in.): 10 x 16.7 x 15.5, EPA/CARB Approval (California Air Resource Board): Yes Displacement: 12.57 cu. in. Freeze resistant recoil starter and mitt-grip handle Key stop switch [Read more]

Store: Northern Tool and Equipment

Brand: Briggs & Stratton

Tecumseh Enduro Vertical Engine with Electric Start - 18 HP, 1in. x 35/32in. Shaft, Model# OV490EA

$799.98

Tecumseh 18 HP Enduro Vertical Engine. Enduro OHV technology delivers superior power. Enduro engines have features that extend engine life while providing long-lasting power. Performance, dependability and value are what you can expect from Tecumseh. This engine is smooth, quiet, easy starting and dependable with plenty of torque for even the toughest jobs. Built to take on the toughest outdoor applications. Tecumseh single cylinder engines have a proven track record of dependable, durable and performance. Polyethylene fuel tanks resist dents, rusting and condensation. Features like automotive-style paper air filter and automotive-type rotary pump distributes pressurized oil to all engine bearings mean long life and trouble-free operation. Common applications: Chippers/shredders, pressure washers, tillers, pumps and generators. U.S.A. Engine Displacement (cc): 480, Start Type: Electric, Application: Garden tractors, Lawn tractors, rear engine riders and consumer zero turn radius, Engine Type: Courage OHV, Rated Power (HP): 18, Displacement (cu. in.): 29.9, Shaft Output: Vertical, Shaft Diameter (in.): 1, Shaft Length (in.): 3 5/32, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Fuel Tank: Not included, Fuel Type: Gasoline, Oil Capacity (qt.): 1.94 (62 oz.), Lubrication System: Full pressure, Ignition System: Electronic, Max. RPM: 3,600, Auto Compression Release: Yes, Bolt Circle (in.): 10, Dimensions L x W x H (in.): 18 1/2 x 17 13/16 x 13 3/8 [Read more]

Store: Northern Tool and Equipment

Brand: Tecumseh

Honda-Approved High-Mount Muffler for Honda V-Twin Engines - Fits GX630, 660 and 690 Engines, Right/Oil Filter Side Mount, Model# MUF-0560-SI

$139.99

This High-Mount Muffler for Honda V-Twin Engines innovative design and low number of components results in lower costs. Compact, durable design for flexible application. Recycled exhaust gas temperatures, improved engine performance and sound. Sides: Right / oil filter, Engine Type: Honda GX630, 660, 690 Fully aluminized T125 steel has excellent corrosion resistance [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Left-Hand Muffler Kit for GX610, GX620, & GX670 V-Twin Engines, Model VHRM5

$169.99

Original equipment premium-quality Honda engine muffler kit. Sides: Left, Application: Hi-mount, Engine Type: Honda Honda left-hand muffler only (starter side) For Honda GX610, GX620, & GX670 V-Twin engines [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda-Approved High-Mount Muffler for Honda V-Twin Engines - Fits GX610, 620 and 670 Engines, Right/Oil Filter Side Mount, Model# MUF-0423.SIL

$139.99

This High-Mount Muffler for Honda V-Twin Engines innovative design and low number of components results in lower costs. Compact, durable design for flexible application. Recycled exhaust gas temperatures, improved engine performance and sound. Sides: Right / oil filter, Application: Hi-mount, Engine Type: Honda GX610, 620, 670 Fully aluminized T125 steel has excellent corrosion resistance [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda-Approved High-Mount Muffler for Honda V-Twin Engines - Fits GX610, 620 and 670 Engines, Left/Starter Side Mount, Model# MUF-0424.SIL

$139.99

This High-Mount Muffler for Honda V-Twin Engines innovative design and low number of components results in lower costs. Compact, durable design for flexible application. Recycled exhaust gas temperatures, improved engine performance and sound. Sides: Left / starter, Application: Hi-mount, Engine Type: Honda GX610, 620, 670 Fully aluminized T125 steel has excellent corrosion resistance [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Right-Hand Muffler Kit for GX610, GX620, & GX670 V-Twin Engines, Model VHRM3

$169.99

Original equipment premium-quality Honda engine muffler kit. Sides: Right, Application: Hi-mount, Engine Type: Honda Honda right-hand muffler only (oil filter side) For Honda GX610, GX620, & GX670 V-Twin engines [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with 6:1 Gear Reduction for Cement Mixers - 240cc, 1in. x 3 5/32in. Shaft, Model# GX240UT2HA2

$729.98

The Honda 240cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application: cement mixers. Engine Displacement (cc): 240, Start Type: Recoil, Application: Cement mixers, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 7.1, Torque (ft./lbs.): 11.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: H type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 15/64, Shaft Keyway (in.): 1/4, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: H type 6:1, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.9 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, exhaust pipe protector, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 1in. x 2 29/32in. Shaft, Model# GX630RQXC2

$1,299.98

With experience born on the raceways and roadways and a dedication to innovation, there s plenty of reasons to insist on the new Honda GX630 V-Twin engine. There s superior engine design, with a 90 configuration that reduces vibration and allows a compact footprint. There s superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. There s a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. There s even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. What better reason do you need? Engine Displacement (cc): 630, Start Type: Electric, Shift type, Application: Concrete saws, pressure washers, chippers/shredders, trenchers, vibratory rollers and ride-on cement trowels, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 20.3, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: Q Type, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, (Key size 6.3mm x 50mm), Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 3, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 7/8 x 16 1/8 x 17 3/16, EPA/CARB Approval (California Air Resource Board): Yes Keyswitch 630cc air-cooled, 4-stroke OHV engine [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 1 1/8in. x 3.54in. Shaft, Model# GX660RTAF

$1,499.98

With experience born on the raceways and roadways and a dedication to innovation, there s plenty of reasons to insist on the new Honda GX660 V-Twin engine. There s superior engine design, with a 90 configuration that reduces vibration and allows a compact footprint. There s superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. There s a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. There s even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. What better reason do you need? Engine Displacement (cc): 660, Start Type: Electric, Shift type, Application: Grain augers/elevators, pressure washers, semi-trailer with power pack, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 21, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: T type, Shaft Diameter (in.): 1 1/8, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, (Key size 6.3mm x 70mm), Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 7/8 x 16 1/8 x 17 3/16, EPA/CARB Approval (California Air Resource Board): Yes 660cc air-cooled, 4-stroke OHV engine [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with Electric Start- 160cc, GX Series, 3/4in. x 2 7/16in. Shaft, Model# GX160UT1QXP2

$559.98

The Honda 160cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Engine Displacement (cc): 160, Start Type: Electric with recoil backup, Application: Pressure washers, compressors, generators, water pumps, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 4.8, Torque (ft./lbs.): 7.60 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Keyway (in.): 3/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 1.8, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 1, Muffler Included: Yes, (standard), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Lamp charging system Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer Battery cables not included [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine - 50cc, GX Series, 5/8in. x 1 1/4in. Shaft, Model# GXH50UQXA

$399.98

The Honda 50cc GX Series OHV mini commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Designed for high-RPM applications. Engine Displacement (cc): 50, Start Type: Recoil, Application: Generators, pumps, tillers, small construction equipment, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 2.1, Torque (ft./lbs.): 2.00 at 4,500 RPM, Shaft Output: Horizontal, Shaft Diameter (in.): 5/8, Shaft Length (in.): 1 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 1/4 - 28, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 3 11/32, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 1.65 x 1.42, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Semi-dry, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 0.81, Oil Capacity (qt.): 0.26, Lubrication System: Forced splash, Low Oil Alert: No, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 7,600, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 4 11/64, Mounting Base L x W (in.): 4 3/4 x 2 1/8, Dimensions L x W x H (in.): 8 7/8 x 10 13/16 x 13, EPA/CARB Approval (California Air Resource Board): Yes Honda 50cc GX OHV air-cooled, 4-stroke, horizontal engine Applications: high-RPM Automatic decompression for easy starting [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines