Portable Winch Gas-Powered Capstan Winch - 50cc Honda GHX-50 Engine, 1-Ton Capacity, Model# PCW-5000

$1,349.98

If you ever need to bring down hung-up trees, pull out-of-reach logs, get a vehicle un-stuck, or haul a moose out of the woods this lightweight, portable, gas-powered winch, with 2200 lb pulling capacity is for you. Weighing only 35 lbs, you can bring the Portable Winch and its powerful Honda GXH-50 engine anywhere and anchor it to anything with the included 6-ft.L sling. Pulling distance is only limited by the length of your rope. Engine: Honda GHX-50, Line Pull (lbs.): 2,200, 4,400 with snatch block, HP: 2.1, Engine Displacement (cc): 50, Line Speed (FPM): 40, 60 with optional drum, Gear Ratio: 110:1, Rope Type: Double-braided polyester, Mounting Hardware Included: Anchor sling, Dimensions L x W x H (in.): 15 x 14 x 16 [Read more]

Store: Northern Tool and Equipment

Brand: Portable Winch

Efco Gas-Powered Chain Saw - 51.7cc, 18in. Bar, Model# 152-18

$389.98

Efco chain saws feature legendary Italian design and performance, delivering astounding quality and reliability. These chain saws utilize engines with linear torque speed for rapid and responsive acceleration even during extended periods of use. Nylon filters improve performance and ensure trouble-free operation and easy maintenance. Chain Saw Type: Gas, Engine Displacement (cc): 51.7, Chain Pitch (in.): 0.325, Chain Gauge (in.): .58, Bar Length (in.): 18, HP: 3.4, Fuel Capacity (oz.): 16.9, Oil Capacity (oz.): 9.1, Oil Pump Flow: Automatic / adjustable, Primer Bulb: Yes, Tool Weight (lbs.): 10.7 Ideal for more demanding uses like medium-to-large diameter tree cutting and felling Primer bulb, compression relief and semi-automatic choke for easy starts Side-chain tension adjustment Oregon bar and chain 72 drive links [Read more]

Store: Northern Tool and Equipment

Brand: Efco

Ecofan GS Heat-Powered Fan for Gas Stoves, Model# 806GS-BBX

$169.00

Heat-powered fan generates its own electricity from your gas stoves heat, improving the efficiency of the stove by circulating the warm air it produces. Sends the air directly into the living area rather than having most of the heat rise immediately to the ceiling. Sits on top of stove; starts automatically when stove surface temperature reaches 150 F. Speed increases as the stove heats up and decreases as it cools down. Turns off automatically. Aluminum fan will never rust. Auto and Manual: Auto, Works With: Gas stoves, Material Type: Aluminum, Mount Type: Sits directly on top of stove, Dimensions L x W x H (in.): 3 1/2 x 5 1/2 x 9 1/4, Includes: 1 Fan Heat-powered fan for propane or natural gas stoves Generates electricity from stoves heat Circulates warm air into living area Starts automatically when stove surface temperature reaches 150 F Runs faster as the stove heats up Unique blade design delivers very broad, gentle air movement for increased comfort Operates silently Costs nothing to operate Bimetal strips prevent fan from overheating Black with gold blades [Read more]

Store: Northern Tool and Equipment

Brand: Ecofan Airplus

Steele Products Gas-Power Pressure Washer - 5.5 HP, 2.2 GPM, 2400 PSI, Model# SP-WG240

$449.98

This Steele Products Gas-Power Pressure Washer is powered by a OHV 4-stroke engine and maintenance-free pump, providing the heavy-duty PSI and GPM you need. Pressure (PSI): 2,400, Flow (GPM): 2.2, Engine: OHV 4 Stroke, Hose: 25 ft, Fuel Type: Gas Variable speed control puts you in charge Stainless steel wand at the end of a high-pressure hose with quick connect coupling gives you freedom of movement Comes with 4 quick-connect spray tips (0, 10, 15 and soap) 5.5 HP [Read more]

Store: Northern Tool and Equipment

Brand: Steele Products

Meyer Wireless Controller - For Gas Powered Spreaders, Model# 63755

$99.98

This Meyer Wireless Controller adds incredible convenience and versatility to gas-driven insert hopper spreaders, allowing users to start and choke the engine as well as engage the drive system. Plus, it allows users to quickly and easily move insert hopper spreaders between vehicles. Accessory Type: Wireless controller, Variable Speed: Yes, Assembly Required: No [Read more]

Store: Northern Tool and Equipment

Brand: Meyer Products

All-Power America Gas Pressure Washer - 2.7 GPM, 3000 PSI, Model# APW-5102

$499.98

This gas pressure washer from All-Power America is a great choice for keeping the fleet clean. Pressure (PSI): 3,000, Flow (GPM): 2.7, Engine: 6.5 HP OHV, Pump: Brass, Nozzle Type: Adjustable: 0, 15, 25, 40, Soap, Pump Oil Type: SAE 30W nondetergent, Low Oil Shutdown: Yes, Thermal Protector: Yes 10in. pneumatic tires [Read more]

Store: Northern Tool and Equipment

Brand: All Power America

Hypertech Max Energy Power Programmer - For 2003-09 Dodge 5.7L Hemi Gas Engines, Model# 52001

$379.98

Hypertech electronic Max Energy Power Programmer extracts every bit of energy possible out of fuel, delivering better fuel mileage at part throttle and more power at wide open throttle. U.S.A. Engine: Dodge, Fits Years: 2003 - 2009, Engine Type: 5.7L Hemi Gas Engines, Torque Gain (ft-lbs.): Up to 18 (with premium octane engine tuning), HP Gain: Up to 16 (with premium octane engine tuning), Improves Fuel Economy: Yes, Emissions Legal: Yes, 50 State, Updateable Software: Yes, Internet updateable, USB Cable Included: Yes Adjusts top-speed limiter Adjusts engine RPM rev limiter for increased performance Adjusts transmission shift points and increase shift firmness Recalibrates speedometer/odometer connection for non-stock tire sizes and/or gear ratios Adjusts cooling fan on/off temperatures to match thermostat Easy return to stock settings Easy plug-and-play installation [Read more]

Store: Northern Tool and Equipment

Brand: Hypertech

Hypertech Max Energy Power Programmer - For 2007-09 GM 4.8L, 5.3L, 6.0L Gas Engines, Model# 32004

$379.98

Hypertech electronic Max Energy Power Programmer extracts every bit of energy possible out of fuel, delivering better fuel mileage at part throttle and more power at wide open throttle. U.S.A. Engine: GM, Fits Years: 2007 - 2009 (except Envoy and Denali), Engine Type: 4.8L, 5.3L, 6.0L Gas Engines, Torque Gain (ft-lbs.): Up to 24 (with premium octane engine tuning), HP Gain: Up to 20 (with premium octane engine tuning), Improves Fuel Economy: Yes, Emissions Legal: Yes, 50 State, Updateable Software: Yes, Internet updateable, USB Cable Included: Yes Adjusts top-speed limiter Adjusts engine RPM rev limiter for increased performance Adjusts transmission shift points and increase shift firmness Recalibrates speedometer/odometer connection for non-stock tire sizes and/or gear ratios Adjusts cooling fan on/off temperatures to match thermostat Easy return to stock settings Easy plug-and-play installation [Read more]

Store: Northern Tool and Equipment

Brand: Hypertech

Hypertech Max Energy Power Programmer - For 2004-09 Ford 4.6L, 5.4L Gas Engines, Model# 42003

$379.98

Hypertech electronic Max Energy Power Programmer extracts every bit of energy possible out of fuel, delivering better fuel mileage at part throttle and more power at wide open throttle. U.S.A. Engine: Ford, Fits Years: 2004 - 2009, Engine Type: 4.6L, 5.4L Gas Engines, Torque Gain (ft-lbs.): Up to 40 (with premium octane engine tuning), HP Gain: Up to 25 (with premium octane engine tuning), Improves Fuel Economy: Yes, Emissions Legal: Yes, 50 State, Updateable Software: Yes, Internet updateable, USB Cable Included: Yes Adjusts top-speed limiter Adjusts engine RPM rev limiter for increased performance Adjusts transmission shift points and increase shift firmness Recalibrates speedometer/odometer connection for non-stock tire sizes and/or gear ratios Adjusts cooling fan on/off temperatures to match thermostat Easy return to stock settings Easy plug-and-play installation [Read more]

Store: Northern Tool and Equipment

Brand: Hypertech

Hypertech Max Energy Power Programmer - For 1996-2006 GM 4.8L, 5.3L, 5.7L, 6.0L, 7.4L, 8.0L Gas Engines, Model# 32000

$379.98

Hypertech electronic Max Energy Power Programmer extracts every bit of energy possible out of fuel, delivering better fuel mileage at part throttle and more power at wide open throttle. U.S.A. Engine: GM, Fits Years: 1996 - 2006, Engine Type: 4.8L, 5.3L, 5.7L, 6.0L, 7.4L, 8.0L Gas Engines, Torque Gain (ft-lbs.): Up to 16 (with premium octane engine tuning), HP Gain: Up to 18 (with premium octane engine tuning), Improves Fuel Economy: Yes, Emissions Legal: Yes, 50 State, Updateable Software: Yes, Internet updateable, USB Cable Included: Yes Adjusts top-speed limiter Adjusts engine RPM rev limiter for increased performance Adjusts transmission shift points and increase shift firmness Recalibrates speedometer/odometer connection for non-stock tire sizes and/or gear ratios Adjusts cooling fan on/off temperatures to match thermostat Easy return to stock settings Easy plug-and-play installation [Read more]

Store: Northern Tool and Equipment

Brand: Hypertech

Efco Gas-Powered Chain Saw - 35.2cc, 16in. Bar, Model# MT3600-16

$219.99

Efco chain saws feature legendary Italian design and performance, delivering astounding quality and reliability. These chain saws utilize engines with linear torque speed for rapid and responsive acceleration even during extended periods of use. Nylon filters improve performance and ensure trouble-free operation and easy maintenance. Chain Saw Type: Gas, Chain Pitch (in.): 3/8, Chain Gauge (in.): .050, Bar Length (in.): 16, HP: 2.1 Ideal for small-to-medium diameter cutting, lopping and light pruning Oregon bar and chain Semi-automatic choke BurnRight engine uses 40% less fuel consumption than standard 2-stroke engine 5-year consumer/2-year commercial limited warranty. [Read more]

Store: Northern Tool and Equipment

Brand: Efco