Briggs & Stratton I/C Horizontal Engine 305cc, 1450 Series, 14.5 Gross Torque, 1in. x 4 11/32in. Shaft, Model# 205432-0038-E1

$649.99

Designed for use with generators, this Briggs & Stratton 305cc 1450 Series™ Industrial/Commercial Horizontal Engine produces 14.5 ft-lbs. Gross Torque to get the job done. Compact overhead valve design runs cooler and cleaner delivering more power, longer engine life and improved fuel economy. High flow cylinder head produces 20% more power than conventional engines, increased fuel efficiency and significantly reduced emissions. This engine has fast fuel delivery for one-pull starts and smooth operation. U.S.A. Engine Displacement (cc): 305, Start Type: Recoil, Application: Generators, Engine Type: OHV 1450 series, Rated Power (HP): Manufacturer no longer rates this engine by HP, Torque (ft./lbs.): 14.50, Shaft Output: Horizontal, Shaft Diameter (in.): 1, Shaft Length (in.): 4 11/32, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.12 x 2.44, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 4, Oil Capacity (qt.): 0.82 - 0.88 (26 - 28 oz.), Lubrication System: Splash, Low Oil Alert: No, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, remote, Choke Control: Manual, Max. RPM: 3,750, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, 5, 6 1/2, Mounting Bolt Pattern L x W (in.): 7 11/16 x 4, Dimensions L x W x H (in.): 16 x 16 x 16 1/2, EPA/CARB Approval (California Air Resource Board): No Self-lubricating heavy-duty bearing made of steel-backed Teflon coated bronze to withstand load and reduce wear Dura-Bore™ cast iron sleeve withstands wear and abuse while providing improved oil control Fuel shutoff valve makes it easy to shut off fuel flow for safe transportation [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton I/C Horizontal Engine with 6:1 Gear Reduction 205cc, 875 Series, 8.75 Gross Torque, 3/4in. x 2in. Shaft, Model# 121352-0549&#45

$369.99

Briggs & Stratton 205cc 900 Series™ Industrial/Commercial Horizontal Engine produces 9.00 ft-lbs. Gross Torque to get the job done. 6:1 gear reduction for cement mixers and pumps. Compact overhead valve design runs cooler and cleaner delivering more power, longer engine life and improved fuel economy. High flow cylinder head produces 20% more power than conventional engines, increased fuel efficiency and significantly reduced emissions. This engine has fast fuel delivery for one-pull starts and smooth operation. Not for sale in California (CA residents please see CA CARB-Approved engine NTE Item# 60681). Customers are responsible for checking local codes and regulations prior to purchase. Engine Displacement (cc): 205, Start Type: Recoil, Application: Cement mixers, pumps, Engine Type: OHV 900 series, Rated Power (HP): Manufacturer no longer rates this engine by HP, Torque (ft./lbs.): 9.00, Shaft Output: Horizontal, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2, Shaft Keyway (in.): 3/16, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: 6:1, PTO Height (in.): 4 11/64, Bearing Type: Plain, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.69 x 2.20, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3, Oil Capacity (qt.): 0.56 - 0.63 (18 - 20 oz.), Low Oil Alert: No, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, remote, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Bolt Pattern L x W (in.): 6 3/8 x 3 1/8, Dimensions L x W x H (in.): 12 3/8 x 16 x 17, EPA/CARB Approval (California Air Resource Board): No PTO ball bearing Flow-Tek flywheel design Permanent mold piston Removable rewind Rocker stop switch Comfort-Tek pull handle Self-lubricating heavy-dut... [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton I/C Horizontal OHV Engine 342cc, 1550 Series, 15.5 Gross Torque, 1in. x 3 21/32in. Shaft, Model# 212332-0536-B1

$599.99

Briggs & Stratton 342cc 1550 Series™ Industrial/Commercial Horizontal Engine produces 15.5 ft-lbs. Gross Torque to get the job done. Great replacement engine for tillers, log splitters, compressors, pressure washers and blowers. Compact overhead valve design runs cooler and cleaner delivering more power, longer engine life and improved fuel economy. High flow cylinder head produces 20% more power than conventional engines, increased fuel efficiency and significantly reduced emissions. This engine has fast fuel delivery for one-pull starts and smooth operation. U.S.A. Not for sale in California. Customers are responsible for checking local codes and regulations prior to purchase. Engine Displacement (cc): 342, Start Type: Recoil, Application: Tillers, log splitters, compressors, pressure washers, blowers, Engine Type: OHV 1550 Series, Rated Power (HP): Manufacturer no longer rates this engine by HP, Torque (ft./lbs.): 15.50, Shaft Output: Horizontal, Shaft Diameter (in.): 1, Shaft Length (in.): 3 21/32, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.30 x 2.44, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 4, Oil Capacity (qt.): 0.82 - 0.88 (26 - 28 oz.), Lubrication System: Splash, Low Oil Alert: No, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, remote, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, 5, 6 1/2, Mounting Bolt Pattern L x W (in.): 7 11/16 x 3 15/16, Dimensions L x W x H (in.): 16 x 16 x 16, EPA/CARB Approval (California Air Resource Board): No High flow cylinder head Teflon-coa... [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton I/C Horizontal OHV Engine with 6:1 Gear Reduction 305cc, 1450 Series, 14.5 Gross Torque, 1in. x 3 21/32in. Shaft, Model# 205352&#45

$799.99

Briggs & Stratton 305cc 1450 Series™ Industrial/Commercial Horizontal Engine produces 14.5 ft-lbs. Gross Torque to get the job done. 6:1 gear reduction for use with cement mixers and pumps. Compact overhead valve design runs cooler and cleaner delivering more power, longer engine life and improved fuel economy. High flow cylinder head produces 20% more power than conventional engines, increased fuel efficiency and significantly reduced emissions. This engine has fast fuel delivery for One-Pull starts and smooth operation. U.S.A. Engine Displacement (cc): 305, Start Type: Recoil, Application: Cement mixers, pumps, Engine Type: OHV 1450 series, Rated Power (HP): Manufacturer no longer rates this engine by HP, Torque (ft./lbs.): 14.50, Shaft Output: Horizontal, Shaft Diameter (in.): 1, Shaft Length (in.): 3 1/8, Shaft Keyway (in.): 1/4, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: 6:1, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.12 x 2.44, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 4, Oil Capacity (qt.): 0.82 - .088 (26 - 28 oz.), Low Oil Alert: No, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, remote, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, 5, 6 1/2, Mounting Bolt Pattern L x W (in.): 7 11/16 x 4, Dimensions L x W x H (in.): 16 x 16 x 16 1/2, EPA/CARB Approval (California Air Resource Board): No High flow cylinder head Teflon-coated, self-lubricating bronze PTO ball bearing Dura-Bore™ cast iron sleeve withstands wear and abuse while providing improved oil control Fuel shutoff valve makes it easy to shut off fuel flow for safe transportation [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton I/C OHV Horizontal Engine with Electric Start 205cc, 875 Series, 8.75 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 121337-05

$479.99

Briggs & Stratton 205cc 900 Series™ Industrial/Commercial Horizontal Engine produces 9.00 ft-lbs. Gross Torque to get the job done. Features 12V electric start with recoil backup. Compact overhead valve design runs cooler and cleaner delivering more power, longer engine life and improved fuel economy. High flow cylinder head produces 20% more power than conventional engines, increased fuel efficiency and significantly reduced emissions. This engine has fast fuel delivery for One-Pull starts and smooth operation. Not for sale in California. Customers are responsible for checking local codes and regulations prior to purchase. Engine Displacement (cc): 205, Start Type: Electric with recoil backup, Application: Tillers, log splitters, compressors, pressure washers, Engine Type: OHV 900 series, Rated Power (HP): Manufacturer no longer rates this engine by HP, Torque (ft./lbs.): 9.00, Shaft Output: Horizontal, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 27/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.69 x 2.20, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3, Oil Capacity (qt.): 0.56 - 0.63 (18 - 20 oz.), Lubrication System: Splash, Low Oil Alert: No, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, remote, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 1.5, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Bolt Pattern L x W (in.): 6 3/8 x 3 1/8, Dimensions L x W x H (in.): 12 3/8 x 16 x 17, EPA/CARB Approval (California Air Resource Board): No PTO ball bearing Flow-Tek flywheel design Permanent mold pist... [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton Intek Snow Horizontal Engine 7.5 HP, 1in. x 2 27/64in. Shaft, Model# 12D412-0009-E1

$429.99

Briggs & Stratton 205cc Intek Snow Horizontal Engine. Intek engines are designed and built to provide the highest level of performance and power available. Compact OHV design increases engine efficiency and valve life. Aluminized Lo-Tone muffler offers superior sound reduction and corrosion resistance. This engine has large displacement for increased torque and easy removal of wet heavy snow. Freeze resistant recoil starter provides smooth easy starts. Ergonomically designed rewind handle and controls for easy use in cold, snowy weather. Computer optimized snow hood maintains constant carburetor and engine temperatures to optimize cold-weather performance and prevent freeze-up. U.S.A. Displacement (cc): 205, HP: 7.5, Application: Snow Blowers, Torque (ft./lbs.): 9.0, Shaft Output: Horizontal, Engine Type: Snow - OHV, Start Type: Recoil, Shaft Dimensions Diameter x L (in.): 1 x 2 27/64, Mounting Base L x W (in.): 6.38 x 3.12, Bolt Circle (in.): 3 5/8, PTO Height (in.): 4.17, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8-24, Max. RPM: 3,600, Ignition System: Magnetron® Electronic, Cylinders (qty.): 1, Fuel Tank Capacity (qt.): 4, Oil Capacity (qt.): 18-20 oz, Muffler Included: Yes, Low Oil Alert: No, Lubrication System: Splash type, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 2.69 x 2.2, Cylinder Bore: Cast iron, Cooling System: Air Cooled, Carburetor: Float, Fuel Pump: No, Governor System: Mechanical, Auto Compression Release: Yes, Dimensions L x W x H (in.): 10 x 16.7 x 15.5, EPA/CARB Approval (California Air Resource Board): Yes Displacement: 12.57 cu. in. Freeze resistant recoil starter and mitt-grip handle Key stop switch [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton Intek Snow Horizontal Engine with Electric Start 7.5 HP, 3/4in. x 2 27/64in. Shaft, Model# 12D313-0017-E1

$529.99

Briggs & Stratton 205cc Intek Snow Horizontal Engine. Intek engines are designed and built to provide the highest level of performance and power available. Compact OHV design increases engine efficiency and valve life. Aluminized Lo-Tone muffler offers superior sound reduction and corrosion resistance. This engine has large displacement for increased torque and easy removal of wet heavy snow. Freeze resistant recoil starter provides smooth easy starts. Magnetron® Electronic ignition system ensures quick, dependable starts. Ergonomically designed rewind handle and controls for easy use in cold, snowy weather. Computer optimized snow hood maintains constant carburetor and engine temperatures to optimize cold-weather performance and prevent freeze-up. U.S.A. Displacement (cc): 205, HP: 7.5, Application: Snow Blowers, Torque (ft./lbs.): 9.0, Shaft Output: Horizontal, Engine Type: Snow - OHV, Start Type: 110 Volt Electric with rewind back-up start, Shaft Dimensions Diameter x L (in.): 3/4 x 2 27/64, Mounting Base L x W (in.): 6.38 x 3.12, Bolt Circle (in.): 3 5/8, PTO Height (in.): 4.17, Shaft Keyway (in.): 3/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16-24, Max. RPM: 3,600, Ignition System: Magnetron® Electronic, Cylinders (qty.): 1, Fuel Tank Capacity (qt.): 4, Oil Capacity (qt.): 18-20 oz, Muffler Included: Yes, Low Oil Alert: No, Lubrication System: Splash type, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 2.69 x 2.2, Cylinder Bore: Cast iron, Cooling System: Air Cooled, Carburetor: Float, Fuel Pump: No, Governor System: Mechanical, Auto Compression Release: Yes, Dimensions L x W x H (in.): 10 x 16.7 x 15.5, EPA/CARB Approval (California Air Resource Board): Yes Displacement: 12.57 cu. in. Freeze resistant recoil starter and mitt-grip handle Key stop switch [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton OHV Horizontal Engine with 6:1 Gear Reduction 205cc, 825 Series, 8.25 Gross Torque, 3/4in. x 2in. Shaft, Model# 126352-0549&#45

$429.99

Briggs & Stratton 205cc 850 Series™ Horizontal Engine produces 8.50 ft-lbs. Gross Torque to get the job done. 6:1 gear reduction for cement mixers and pumps. Compact overhead valve design runs cooler and cleaner delivering more power, longer engine life and improved fuel economy. This engine has fast fuel delivery for one-pull starts and smooth operation. Not for sale in California (CA residents please see CA CARB-Approved engine NTE Item# 60681). Customers are responsible for checking local codes and regulations prior to purchase. Engine Displacement (cc): 205, Start Type: Recoil, Application: Cement mixers, pumps, Engine Type: OHV 850 series, Rated Power (HP): Manufacturer no longer rates this engine by HP, Torque (ft./lbs.): 8.50, Shaft Output: Horizontal, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2, Shaft Keyway (in.): 3/16, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: 6:1, PTO Height (in.): 4 11/64, Bearing Type: Plain, Cylinders (qty.): 1, Cylinder Bore: Aluminum alloy, Bore x Stroke (in.): 2.69 x 2.20, Cooling System: Air cooled, Air Cleaner Type: Automotive type pleated paper air filter, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3, Oil Capacity (qt.): 0.56 - .063 (18 - 20 oz), Lubrication System: Splash, Low Oil Alert: No, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, remote, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Bolt Pattern L x W (in.): 6 3/8 x 3 1/8, Dimensions L x W x H (in.): 10 1/8 x 15 9/16 x 14 3/8, EPA/CARB Approval (California Air Resource Board): No Includes spring throttle return PTO ball bearings to withstand load and reduce wear Aluminum alloy bore for cooler operation Fuel shut-off valve makes it easy to shut off fuel flow for safe transportation [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton Vanguard Horizontal Engine 6 HP, 3/4in. x 2 27/64in. Shaft, Model# 118432-0036-E1

$549.99

Briggs & Stratton 6 HP Vanguard OHV Horizontal Engine. Overhead valve design runs cooler and cleaner delivering more power, longer engine life and improved fuel economy. Dura-Bore cast iron cylinder sleeve withstands wear and abuse while providing improved oil control. required. Not for sale in California. Customers are responsible for checking local codes and regulations prior to purchase. Engine Displacement (cc): 182, Start Type: Recoil, Application: Tillers, compressors, log splitters, edgers, Engine Type: Vanguard OHV, Rated Power (HP): 6, Shaft Output: Horizontal, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 27/64, Shaft Keyway (in.): 3/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.68 x 1.97, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.8, Oil Capacity (qt.): 1.5 (24 oz), Lubrication System: Splash, Low Oil Alert: Yes, Ignition System: Electonic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 7 13/16 x 4 5/8, Mounting Bolt Pattern L x W (in.): 6 15/16 x 3 1/8 to 3 7/8, Dimensions L x W x H (in.): 13 3/16 x 14 3/8 x 13 7/8, EPA/CARB Approval (California Air Resource Board): No Dual PTO ball bearing Dual-Clean air cleaner uses pleated paper filter with foam pre-cleaner to ensure double protection for long engine life Mechanical Compression Release provides smooth, easy starts and ensures engine reaches maximum power instantly Large volume muffler is up to 50% quieter than comparable models Oil Guard Low-Oil Shutdown System significantly reduces the chance of en... [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton Vanguard Horizontal V-Twin Engine 16 HP, 1in. x 2 1/4in. Shaft, Model# 305447-0075-G1

$1,149.99

Briggs & Stratton 16 HP Vanguard V-Twin OHV Horizontal Engine. V-Twin 90° overhead valve design runs cooler, cleaner and more efficiently. More HP output with less displacement and less carbon build-up. Engine Displacement (cc): 479, Start Type: Electric with recoil backup, Application: Many commercial applications including compressors, pressure washers, conveyors, etc, Engine Type: Vanguard V-Twin OHV, Rated Power (HP): 16, Shaft Output: Horizontal, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Bearing Type: Ball, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.68 x 2.60, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Yes, (Pulse), Oil Capacity (qt.): 1.5 (48 oz.), Lubrication System: Full pressure, Low Oil Alert: No, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, remote, Choke Control: Manual, remote, Max. RPM: 3,600, Charging System Amps: 16, Muffler Included: No, Auto Compression Release: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Bolt Pattern L x W (in.): 7 11/16 x 4 1/16, Dimensions L x W x H (in.): 12 5/16 x 16 1/8 x 19, EPA/CARB Approval (California Air Resource Board): Yes Sound treatment package Manual throttle Panel with key switch installed Dual oil drain Longer valve life and improved fuel economy Full lubrication with spin-on oil filter cleans oil and protects engine components Premium sintered iron cylinder sleeves for improved heat transfer for lower oil consumption and longer engine life Full-length replaceable valve guides and seals extend valve life and lower oil consumption Commercial-quality components designed and tested to meet commercial engine standar... [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton Vanguard V-Twin Horizontal Engine 23 HP, 1in. x 2 29/32in. Shaft, Model# 386447-0079-G1

$1,479.99

Briggs & Stratton 23 HP Vanguard V-Twin OHV Horizontal Engine. V-Twin 90° overhead valve design runs cooler, cleaner and more efficiently. More HP output with less displacement and less carbon build-up. Longer valve life and improved fuel economy. Full lubrication with spin-on oil filter cleans oil and protects engine components to ensure maximum lubrication and long life. U.S.A. Engine Displacement (cc): 627, Start Type: Electric, Application: Many commericial applications including compressors, pressure washers, conveyors, etc, Engine Type: Vanguard V-Twin OHV, Rated Power (HP): 23, Shaft Output: Horizontal, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Bearing Type: Ball, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.97 x 2.76, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Yes, (Pulse), Oil Capacity (qt.): 1.5 (48 oz.), Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, remote, Choke System: Manual, remote, Max. RPM: 3,600, Charging System Amps: 16, Muffler Included: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Bolt Pattern L x W (in.): 7 11/16 x 4, Dimensions L x W x H (in.): 13 11/16 x 15 15/16 x 17 11/16, EPA/CARB Approval (California Air Resource Board): Yes Spin on oil filter Starter panel assembly Dual oil drain Steel-backed aluminum mag. bearing and high radial load PTO bearing Premium sintered iron cylinder sleeves for improved heat transfer, lower oil consumption and longer engine life Full-length replaceable valve guides and seals extend valve life and lower oil consumption Dual-Clean air cleaner uses pleated pap... [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton Vanguard V-Twin Horizontal Engine with Electric Start 16 HP, 1in. x 2 29/32in. Shaft, Model# 305447-0068-B1

$1,299.99

Briggs & Stratton 16 HP Vanguard V-Twin OHV Horizontal Engine. V-Twin 90° overhead valve design runs cooler, cleaner and more efficiently. More HP output with less displacement and less carbon build-up. Longer valve life and improved fuel economy. Engine Displacement (cc): 479, Start Type: Electric, Application: Many commercial applications including compressors, pressure washers, conveyors, etc, Engine Type: Vanguard V-Twin OHV, Rated Power (HP): 16, Shaft Output: Horizontal, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Bearing Type: Ball, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.68 x 2.60, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 9, Fuel Pump: No, Oil Capacity (qt.): 1.5 (48 oz), Lubrication System: Full pressure, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, remote, Choke Control: Manual, remote, Max. RPM: 3,600, Charging System Amps: 16, Muffler Included: Yes, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Bolt Pattern L x W (in.): 7 11/16 x 4 1/16, Dimensions L x W x H (in.): 12 5/16 x 16 1/8 x 19, EPA/CARB Approval (California Air Resource Board): No [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton Vanguard V-Twin Horizontal Engine with Electric Start 18 HP, 1in. x 2 29/32in. Shaft, Model# 356447-0066-B1

$1,499.99

Briggs & Stratton 18 HP Vanguard V-Twin OHV Horizontal Engine. V-Twin 90°° overhead valve design runs cooler, cleaner and more efficiently to provide higher HP output with less displacement and less carbon build-up. Longer valve life and improved fuel economy. Full lubrication with spin-on oil filter cleans oil and protects engine components to ensure maximum lubrication and long life. 50-state compliant engine. Engine Displacement (cc): 570, Start Type: Electric with recoil backup, Application: Many commercial applications including compressors, pressure washers, conveyors, etc, Engine Type: Vanguard V-Twin OHV, Rated Power (HP): 18, Shaft Output: Horizontal, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Bearing Type: Ball, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.83 x 2.75, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 9, Fuel Pump: No, Oil Capacity (qt.): 1.5 (48 oz.), Lubrication System: Full pressure, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, remote, Choke Control: Manual, remote, Max. RPM: 3,600, Charging System Amps: 16, Muffler Included: Yes, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Bolt Pattern L x W (in.): 7 11/16 x 4, Dimensions L x W x H (in.): 12.5 x 16 x 23, EPA/CARB Approval (California Air Resource Board): Yes Starter panel assembly Dual oil drain Premium sintered iron cylinder sleeves for improved heat transfer, lower oil consumption and longer engine life Full-length replaceable valve guides and seals extend valve life and lower oil consumption Exceptionally quiet operation Dual-clean air cleaner uses pleated paper filter with foam pr... [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton Vanguard V-Twin Horizontal Engine with Electric Start 18 HP, 1in. x 2 29/32in. Shaft, Model# 356447-0075-G1

$1,279.99

Briggs & Stratton 18 HP Vanguard V-Twin OHV Horizontal Engine. V-Twin 90° overhead valve design runs cooler, cleaner and more efficiently. More HP output with less displacement and less carbon build-up. Longer valve life and improved fuel economy. Full lubrication with spin-on oil filter cleans oil and protects engine components to ensure maximum lubrication and long life. Engine Displacement (cc): 570, Start Type: Electric with recoil backup, Application: Many commercial applications including compressors, pressure washers, conveyors, etc, Engine Type: Vanguard V-Twin OHV, Rated Power (HP): 18, Shaft Output: Horizontal, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Bearing Type: Ball, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.83 x 2.76, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Yes, (Pulse), Oil Capacity (qt.): 1.5 (48 oz.), Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, remote, Choke Control: Manual, remote, Max. RPM: 3,600, Charging System Amps: 16, Muffler Included: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Bolt Pattern L x W (in.): 7 11/16 x 4, Dimensions L x W x H (in.): 13 3/8 x 16 1/8 x 17 1/4, EPA/CARB Approval (California Air Resource Board): Yes Starter panel assembly Dual oil drain Premium sintered iron cylinder sleeves for improved heat transfer, lower oil consumption and longer engine life Full-length replaceable valve guides and seals extend valve life and lower oil consumption Dual-clean air cleaner uses pleated paper filter with foam pre-cleaner to ensure double protection for long engine life ... [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton Vanguard V-Twin Horizontal Engine with Electric Start 21 HP, 1in. x 2 29/32in. Shaft, Model# 385447-0075-E1

$1,629.99

Briggs & Stratton engine with V-Twin 90° overhead valve design runs cooler, cleaner and more efficiently. More HP output with less displacement and less carbon build-up. Longer valve life and improved fuel economy. Full lubrication with spin-on oil filter cleans oil and protects engine components to ensure maximum lubrication and long life. Engine Displacement (cc): 627, Start Type: Electric with recoil backup, Application: Riding mowers, compressors and power washers, Engine Type: Vanguard V-Twin OHV, Rated Power (HP): 21, Shaft Output: Horizontal, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Bearing Type: Ball, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.97 x 2.76, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Yes, (Pulse), Oil Capacity (qt.): 1.5 (48 oz.), Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, remote, Choke System: Manual, remote, Max. RPM: 3,600, Charging System Amps: 16, Muffler Included: No, Bolt Circle (in.): 5, 6 1/5, 7 3/4, Mounting Bolt Pattern L x W (in.): 7 11/16 x 4, Dimensions L x W x H (in.): 13 11/16 x 17 x 17 11/16, EPA/CARB Approval (California Air Resource Board): Yes Starter panel assembly Dual oil drain Premium sintered iron cylinder sleeves for improved heat transfer, lower oil consumption and longer engine life Full-length replaceable valve guides and seals extend valve life and lower oil consumption [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton Vanguard V-Twin Horizontal Engine with Electric Start 31HP, 1 1/8in. x 4in. Shaft, Model# 543477-0065-E1

$2,399.99

Briggs & Stratton 31 HP Vanguard V-Twin OHV Horizontal Engine. Innovative intake and exhaust system results in a quieter-running engine. Advanced Debris Management System features an easy clean access and allows the engine to run cooler and cleaner, which prolongs engine life. Engine Displacement (cc): 895, Start Type: Electric, Application: Many commercial applications including compressors, pressure washers, conveyors, etc, Engine Type: Vanguard V-Twin OHV, Rated Power (HP): 31, Shaft Output: Horizontal, Shaft Diameter (in.): 1 1/8, Shaft Length (in.): 4, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Bearing Type: Ball, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.37 x 3.07, Cooling System: Air cooled, Air Cleaner Type: Centrifugal multi-state, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Yes, Oil Capacity (qt.): 2.5 (79 oz.), Lubrication System: Full pressure, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Remote, Choke System: Remote, Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Yes, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Bolt Pattern L x W (in.): 8 1/8 x 4 1/8, Dimensions L x W x H (in.): 22 1/2 x 23 x 25 20 Amp DC Alternator Foam pre-cleaner prevents clogging Spin on oil filter Debris management system lets engine run cooler 5in. cyclonic industrial air cleaner Magnetron® electronic ignition Full pressure lubrication with spin-on oil filter Dual ball bearing supported crankshaft Flange mount bolt circle Steel-backed aluminum bearings Industrial-grade solenoid shift starter Includes muffler and exhaust manifold Does not include fuel tank [Read more]

Store: Northern Tool

Brand: Vanguard

Briggs & Stratton Vanguard V-Twin Horizontal Engine with Electric Start 35 HP, 1 1/8in. x 4in. Shaft, Model# 613477-0048-E1

$2,399.99

Briggs & Stratton 35 HP Vanguard V-Twin OHV Horizontal Engine. Innovative intake and exhaust system results in a quieter-running engine. Advanced Debris Management System features an easy clean access and allows the engine to run cooler and cleaner, which prolongs and extends engine life. Engine Displacement (cc): 993, Start Type: Electric, Application: Many commercial applications including compressors, pressure washers, conveyors, etc, Engine Type: Vanguard V-Twin OHV, Rated Power (HP): 35, Shaft Output: Horizontal, Shaft Diameter (in.): 1 1/8, Shaft Length (in.): 4, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 6 1/8, Bearing Type: Ball, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.37 x 3.41, Cooling System: Air cooled, Air Cleaner Type: Dual-stage Cyclonic, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Yes, (Pulse), Oil Capacity (qt.): 2.47 (79 oz.), Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Manual friction, Choke System: Manual, Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: No, Auto Compression Release: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Bolt Pattern L x W (in.): 9 1/8 x 5 21/64, Dimensions L x W x H (in.): 20 x 19 1/2 x 28 9/16, EPA/CARB Approval (California Air Resource Board): Yes 20 Amp DC alternator Foam pre-cleaner prevents clogging 5in. cyclonic industrial air cleaner Spin on oil filter Steel-backed aluminum mag. bearing and high radial load PTO bearing Industrial-grade solenoid shift starter [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Briggs & Stratton Horizontal OHV Engine 250cc, 1150 Series, 11.5 Gross Torque, 3/4in. x 2 5/16in. Shaft, Model# 150212-2523-B8

$359.99

Briggs & Stratton 250cc 1150 Series™ Horizontal Engine produces 11.5 ft-lbs. Gross Torque to get the job done. Compact overhead valve design runs cooler and cleaner delivering more power, longer engine life and improved fuel economy. U.S.A. Engine Displacement (cc): 250, Start Type: Recoil, Application: Tillers, compressors, log splitters, edgers, Engine Type: OHV 1150 series, Rated Power (HP): Manufacturer no longer rates this engine by HP, Torque (ft./lbs.): 11.50, Shaft Output: Horizontal, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 5/16, Shaft Keyway (in.): 3/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Plain, Cylinders (qty.): 1, Cylinder Bore: Aluminum alloy, Bore x Stroke (in.): 2.97 x 2.20, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3, Oil Capacity (qt.): 0.82 - 0.88 (26 - 28 oz.), Low Oil Alert: No, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Throttle Control: Adjustable for a constant speed operation, manual friction, remote, Choke Control: Manual, Max. RPM: 3,800, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Bolt Pattern L x W (in.): 6 3/8 x 3 1/8, Dimensions L x W x H (in.): 10 1/8 x 15 5/8 x 15 1/8, EPA/CARB Approval (California Air Resource Board): No Float feed carburetor for one-pull starts and smooth operation Aluminum alloy bore for cooler operation [Read more]

Store: Northern Tool

Brand: Briggs & Stratton

Honda Horizontal Engine 11 HP, 1in. x 3 31/64in. Shaft, Model# GX340K1QA2

$679.99

The Honda 340cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Limit two per customer. Engine Displacement (cc): 340, Start Type: Recoil, Application: Chipper/shredders, log splitters, compressors, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 9.5, Torque (ft./lbs.): 16.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.2 x 2.5, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6.4, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, exhaust pipe protector, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 1/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Honda 340 OHV air-cooled, 4-stro... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal Engine 13 HP, 1in. x 3 31/64in. Shaft, Model# GX390T1QAA2

$699.99

The Honda 390cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Limit two per customer. Engine Displacement (cc): 390, Start Type: Recoil, Application: Pressure washers, compressors, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 11, Torque (ft./lbs.): 18.50 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.5 x 2.5, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6.4, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Silent, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 1/16, Dimensions L x W x H (in.): 15 7/8 x 17 11/16 x 17 3/8, EPA/CARB Approval (California Air Resource Board): Yes Honda 390cc GX OHV air-cooled, 4-stroke, horizontal engine Automatic deco... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal Engine 160cc, 3/4in. x 2 7/16in. Shaft, Model# GC160AQHAF

$249.99

Honda 160cc premium residential, horizontal shaft engine features overhead cam technology. The GC series are incredibly quiet and utilize the worlds first internal timing belt. Honda has taken their technology one step further with the development of the GC Series, a line of rugged powerful and economical overhead cam engines designed specifically for home-use and recreational applications. Fixed throttle. U.S.A. Not for sale in California. Engine Displacement (cc): 160, Start Type: Recoil, Application: Pressure washers, log splitters, Engine Type: GC series OHC - premium residential duty, Rated Power (HP): 4.6, Torque (ft./lbs.): 6.90 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Keyway (in.): 3/16, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Standard, Cylinders (qty.): 1, Cylinder Bore: Aluminum alloy, Bore x Stroke (in.): 2.5 x 2.0, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dry (paper) type, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 1.9, Fuel Pump: Yes, Oil Capacity (qt.): 0.61, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Fixed, Max. RPM: 3,600, Muffler Included: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 2 15/16 to 3 5/32, Dimensions L x W x H (in.): 13 5/16 x 14 1/2 x 13, EPA/CARB Approval (California Air Resource Board): Yes [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal Engine 6.5 HP, 3/4in. x 2 7/16in. Shaft, Model# GX200TQX2

$399.99

The Honda 200cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Limit two per customer. Engine Displacement (cc): 200, Start Type: Recoil, Application: Pressure washers, compressors, log splitters, Engine Type: GX series OHV - commercial duty, Torque (ft./lbs.): 9.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Keyway (in.): 1/4, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 2.1, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (Cable), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, spark arrester, Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 5/8 x 14 13/16 x 13 3/16, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer 50-state compliant engine [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal Engine with Cyclone Air Filter 270cc, GX Series, 1in x 2 3/54in. Shaft, Model# GX270UQXC9

$699.99

The Honda 270cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Limit two per customer. Engine Displacement (cc): 270, Start Type: Recoil, Application: Pressure washers, compressors, log splitters, chipper/shredders, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 8, Torque (ft./lbs.): 13.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Cyclone, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, inner vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes 50-state compliant engine [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHC Engine 190cc, GC Series, 3/4in. x 2 7/16in. Shaft, Model# GC190LAQHAF

$279.99

Honda 190cc premium residential, horizontal shaft engine features overhead cam technology. The GC series are incredibly quiet and utilize the worlds first internal timing belt. Honda has taken their technology one step further with the development of the GC Series, a line of rugged powerful and economical overhead cam engines designed specifically for home-use and recreational applications. Common Applications: pressure washers, log splitters and chipper/shredders. Engine Displacement (cc): 190, Start Type: Recoil, Application: Pressure washers, log splitters, chippers/shredders, Engine Type: GC series OHC - premium residential duty, Rated Power (HP): 5.2, Torque (ft./lbs.): 8.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Standard, Cylinders (qty.): 1, Cylinder Bore: Aluminum alloy, Bore x Stroke (in.): 2.7 x 2.0, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dry (paper) type, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 1.9, Fuel Pump: Yes, Oil Capacity (qt.): 0.61, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Fixed, Max. RPM: 3,600, Muffler Included: Yes, Auto Compression Release: Yes, Dimensions L x W x H (in.): 13 5/8 x 14 1/2 x 13, EPA/CARB Approval (California Air Resource Board): Yes Internal timing belt Uniblock design Lightweight and efficient for noncommercial use 50-state compliant engine [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHC Engine 160cc, GC Series, 3/4in. x 2 7/16in. Shaft, Model# GC160LAQHA

$229.99

Honda 160cc premium residential, horizontal shaft engine features overhead cam technology. The GC series are incredibly quiet and utilize the worlds first internal timing belt. Honda has taken their technology one step further with the development of the GC Series, a line of rugged powerful and economical overhead cam engines designed specifically for home-use and recreational applications. Common Applications: pressure washers, compressors, log splitters and chipper/shredders. Engine Displacement (cc): 160, Start Type: Recoil, Application: Pressure washers, compressors, log splitters, chipper/shredders, Engine Type: GC series OHC - premium residential duty, Rated Power (HP): 4.6, Torque (ft./lbs.): 6.90 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Keyway (in.): 3/16, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Standard, Cylinders (qty.): 1, Cylinder Bore: Aluminum alloy, Bore x Stroke (in.): 2.5 x 2.0, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dry (paper) type, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 1.9, Fuel Pump: Yes, Oil Capacity (qt.): 0.61, Lubrication System: Forced splash, Low Oil Alert: No, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 2 61/64 to 3 15/32, Dimensions L x W x H (in.): 13 5/16 x 14 1/2 x 13, EPA/CARB Approval (California Air Resource Board): Yes Honda 160cc OHC air-cooled, 4-stroke, horizontal engine Compact and lightweight design 50-state compliant engine [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHC Engine for Generator 160cc, GC Series, Tapered 3/4in. x 2 53/64in. Shaft, Model# GC160LAVXA

$299.99

Honda 160cc premium residential, horizontal shaft engine features overhead cam technology. The GC series are incredibly quiet and utilize the worlds first internal timing belt. Honda has taken their technology one step further with the development of the GC Series, a line of rugged powerful and economical overhead cam engines designed specifically for home-use and recreational applications. Common applications: generators. Engine Displacement (cc): 160, Start Type: Recoil, Application: Generators, Engine Type: GC series OHC - premium residential duty, Rated Power (HP): 4.6, Torque (ft./lbs.): 6.90 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: V type, Shaft Diameter (in.): 3/4 (tapered), Shaft Length (in.): 2 53/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Aluminum alloy, Bore x Stroke (in.): 2.5 x 2.0, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dry (paper) type, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 1.9, Fuel Pump: Yes, Oil Capacity (qt.): 0.61, Lubrication System: Forced splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 2 15/16 to 3 5/32, Dimensions L x W x H (in.): 13 5/16 x 14 1/2 x 13, EPA/CARB Approval (California Air Resource Board): Yes Compact and lightweight design 50-state compliant engine [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHV Engine 120cc, GX Series, 3/4in. x 2 7/16in. Shaft, Model# GX120UT1QX2

$349.99

The Honda 120cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Limit two per customer. Engine Displacement (cc): 120, Start Type: Recoil, Application: Pressure washers, compressors, log splitters, chipper/shredders, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 3.5, Torque (ft./lbs.): 5.40 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Keyway (in.): 3/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.4 x 1.7, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 2.1, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (standard, spark arrestor), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes Honda 120cc GX OHV air-cooled, 4-stroke, horizontal engine Automatic decompression for easy starting Heavy-du... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHV Engine 160cc, GX Series, 3/4in. x 2 7/16in. Shaft, Model# GX160UT1QX2

$369.99

The Honda 160cc GX Series OHV Commercial-Grade Horizontal Engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, log splitters and chipper/shredders. Limit two per customer. Engine Displacement (cc): 160, Start Type: Recoil, Application: Pressure washers, compressors, log splitters, chipper/shredders, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 4.8, Torque (ft./lbs.): 7.60 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Keyway (in.): 3/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 1.8, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (standard), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes Honda 160cc OHV air-cooled, 4-stroke, horizontal engine Automatic decompression ... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHV Engine 240cc, GX Series, 1in. x 3 31/64in. Shaft, Model# GX240U1QA2

$589.99

The Honda 240cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Limit two per customer. Engine Displacement (cc): 240, Start Type: Recoil, Application: Chipper/shredders, pressure washers, compressors, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 7.1, Torque (ft./lbs.): 11.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.9 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, exhaust pipe protector, spark arrestor, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Honda... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHV Engine with Electric Start 340cc, GX Series, 1in. x 3 31/64in. Shaft, Model# GX340UT1QNE2

$879.98

The Honda 340cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Engine Displacement (cc): 340, Start Type: Electric with recoil backup, Application: Pressure washers, compressors, log splitters, chipper/shredders, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 9.5, Torque (ft./lbs.): 16.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.2 x 2.5, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6.4, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 10, Muffler Included: Standard, exhaust pipe protector, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 1/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Boa... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Kohler 7 HP Horizontal Engine 208cc, Model# PA-CH27-011

$349.98

This Kohler horizontal engine is an excellent choice for log splitters, pressure washers and more. Engine Displacement (cc): 208, Start Type: Recoil, Application: Log splitters, pressure washers, Engine Type: Command Pro small CH270 - OHV, Rated Power (HP): 7, Torque (ft./lbs.): 9.15, Displacement (cu. in.): 12.7, Shaft Output: Horizontal, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.8 x 2.1, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Heavy duty cyclonic, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 4, Fuel Filter: 3 fuel filters: fill neck, in tank, and carburetor inlet, Oil Capacity (qt.): 0.63, Lubrication System: Splash, Low Oil Alert: Yes, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float, Max. RPM: 3,600, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Dimensions L x W x H (in.): 12 11/16 x 15 3/16 x 14 3/16 Large muffler for quiet operation Large metal fuel tank with metal cap Low oil alert Dual air drains [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Kohler Air Cooled V-Twin Horizontal Engine 30 HP, 1.437in. x 4.453in. Shaft, Model# CH750S

$2,199.98

Kohler engines have gone beyond just horsepower and torque to become the standard in the utility engine industry. U.S.A. Engine Displacement (cc): 747, Start Type: Electric, Engine Type: Command Pro - CH750 - OHV, Rated Power (HP): 30, Torque (ft./lbs.): 45, Displacement (cu. in.): 45, Shaft Output: Horizontal, Shaft Diameter (in.): 1 7/16, Shaft Length (in.): 4 29/64, Shaft Keyway (in.): 3/8, Shaft End Tapped (Diameter (in.)/Threads per inch): 1.5 / 5/8-18 UNF, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.3 x 2.7, Compression Ratio: 9.4:1, Cooling System: Air cooled, Fuel Type: Gasoline, Fuel Pump: Mechanical, Fuel Filter: In line, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Ignition System: Electronic, Charging System Amps: 25, Dimensions L x W x H (in.): 14 x 17 11/16 x 27 13/16, EPA/CARB Approval (California Air Resource Board): Yes Kohler air cooled V-Twin horizontal engine 4-cycle, V-twin design Aluminum block Cast iron cylinder Shown with optional heavy-duty air cleaner 12V solenoid shift starter [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Kohler Command CS Horizontal Engine 12 HP, 1in. x 3 15/32in. Shaft, Model# CS12T-941501

$939.98

Kohler 12 HP Command Pro CS Horizontal Engine. This 12 HP peak performer features a steel-forged horizontal shaft, air-cooling and a single-cylinder design. Its a 4-cycle, gasoline-powered engine with cast iron cylinder liners, aluminum block construction Engine Displacement (cc): 357, Start Type: Recoil, Engine Type: Command Pro CS - CS12 - OHV, Rated Power (HP): 12, Torque (ft./lbs.): 20.1, Displacement (cu. in.): 21.8, Shaft Output: Horizontal, Shaft Diameter (in.): 1, Shaft Length (in.): 3 15/32, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/4 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.35 x 2.48, Compression Ratio: 8.1:1, Cooling System: Air cooled, Air Cleaner Type: Dual element air filter with foam pre-cleaner, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 7.2, Oil Capacity (qt.): 1.1, Lubrication System: Splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Mechanical, Max. RPM: 3,600, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 5, 5 3/4, 6 1/2, Mounting Base L x W (in.): 4 x 7 11/16, Dimensions L x W x H (in.): 12 15/16 x 18 1/8 x 17 7/8, EPA/CARB Approval (California Air Resource Board): Yes [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Kohler Command CS Horizontal Engine 6 HP, 3/4in. x 2 7/16in. Shaft, Model# CS6T-911501

$469.98

Kohler 6 HP Command Pro CS Horizontal Engine. This 6 HP peak performer features a steel-forged horizontal shaft, air-cooling and a single-cylinder design. Its a 4-cycle, gasoline-powered engine with cast iron cylinder liners and aluminum block construction. Engine Displacement (cc): 171, Start Type: Recoil, Engine Type: Command Pro CS - CS6 - OHV, Rated Power (HP): 6, Torque (ft./lbs.): 9.6, Displacement (cu. in.): 10.4, Shaft Output: Horizontal, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Keyway (in.): 3/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.59 x 1.97, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element air filter with foam pre-cleaner, Fuel Tank: Yes, Fuel Type: Gasoline, Oil Capacity (qt.): 0.6, Lubrication System: Splash, Ignition System: Electronic, Governor System: Mechanical, Max. RPM: 3,600, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Dimensions L x W x H (in.): 10 3/16 x 15 1/8 x 14 11/16, EPA/CARB Approval (California Air Resource Board): Yes [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Kohler Command Pro Horizontal Engine with Electric Start 15 HP, 1in. x 3.49in. Shaft, Model# CH15ST-44503

$1,349.98

Kohler 15 HP Command Pro Horizontal Engine. This single-cylinder, air-cooled, 15 HP engine is built to last. OHV, a cast iron cylinder liner, and aluminum block construction make the 4-cycle, gasoline-powered Command Pro ready for the long haul. Engine Displacement (cc): 426, Start Type: Electric with recoil start, Engine Type: Command Pro - CH15 - OHV, Rated Power (HP): 15, Torque (ft./lbs.): 24.8, Displacement (cu. in.): 26, Shaft Output: Horizontal, Shaft Diameter (in.): 1, Shaft Length (in.): 3 1/2, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.55 x 2.64, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element air filter with foam pre-cleaner, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5, Fuel Pump: Mechanical, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Fuel injection, Max. RPM: 3,600, Auto Compression Release: Yes, Dimensions L x W x H (in.): 13 7/16 x 19 13/16 x 17 11/16, EPA/CARB Approval (California Air Resource Board): Yes [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Kohler Command V-Twin Horizontal Engine with Electric Start 18 HP, 1 1/8in. x 4in. Shaft, Model# CH18S-62501

$1,549.98

Kohler 18 HP Command V-Twin Horizontal Engine. This gasoline-driven, 4-cycle, 18 HP engine has reliable features including: OHV, cast iron V-Twin cylinder liners, and aluminum block construction. Engine Displacement (cc): 624, Start Type: Electric, Engine Type: Command Pro V-Twin - CH18 - OHV, Rated Power (HP): 18, Torque (ft./lbs.): 32.8, Displacement (cu. in.): 38.1, Shaft Output: Horizontal, Shaft Diameter (in.): 1 1/8, Shaft Length (in.): 4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.03 x 2.64, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element air filter with foam pre-cleaner, Fuel Type: Gasoline, Fuel Pump: Mechanical, Fuel Filter: In line, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Ignition System: Electronic, Governor System: Manual, Carburetor: Smart Choke, Max. RPM: 3,600, Muffler Included: Yes, Bolt Circle (in.): 5 5/8, 7 3/4, Mounting Base L x W (in.): 7 1/4 x 3 1/2, Dimensions L x W x H (in.): 14 x 17 11/16 x 19, EPA/CARB Approval (California Air Resource Board): Yes Oil Sentry Includes muffler and manifold Engine controls Key switch Throttle Choke Controls [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Kohler Command V-Twin Horizontal Engine with Electric Start 25 HP, 1 1/8in. x 2.79in. Shaft, Model# CH730-0003

$2,049.98

Kohler 25 HP Command V-Twin Horizontal Engine for Exmark Lazer Z mower opened the door to new design and technology for spark-ignited utility engines, going beyond just horsepower and torque to become the standard in the utility engine industry. Hassle-free maintenance, thanks to a full-flow oil filter that offers 100-hour oil changes and 200-hour filter changes. U.S.A. Engine Displacement (cc): 725, Start Type: Electric, Application: Exmark Lazer Z mower, Engine Type: Command Pro V-Twin - CH730 - OHV, Rated Power (HP): 25, Torque (ft./lbs.): 39.9, Displacement (cu. in.): 44, Shaft Output: Horizontal, Shaft Diameter (in.): 1 1/8, Shaft Length (in.): 2 59/64, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.27 x 2.64, Compression Ratio: 9.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element air filter with foam pre-cleaner, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Mechanical, Fuel Filter: In line, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Ignition System: Electronic, Carburetor: Fuel injection, Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Yes, Bolt Circle (in.): 5 5/8, 7 3/4, Mounting Base L x W (in.): 3 1/2 x 7 1/4, Dimensions L x W x H (in.): 13 13/16 x 17 11/16 x 19, EPA/CARB Approval (California Air Resource Board): Yes 12V Electric Start Smart-Choke carburetor Solenoid shift starter PTO thrust bearing Hydraulic valve lifters Spin-on, full-flow oil filter Overhead valve design Oil Sentry [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Kohler Command V-Twin Horizontal Engine with Electric Start 25 HP, 1 7/16in. x 4 29/64in. Shaft, Model# CH730-0040

$1,949.98

Gasoline-driven, 4-cycle Kohler 25 HP Command V-Twin horizontal engine opened the door to new design and technology for spark-ignited utility engines, going beyond just horsepower and torque to become the standard in the utility engine industry. Hassle-free maintenance, thanks to a full-flow oil filter that offers 100-hour oil changes and 200-hour filter changes. U.S.A. Engine Displacement (cc): 725, Start Type: Electric, Engine Type: Command Pro V-Twin - CH730 - OHV, Rated Power (HP): 25, Torque (ft./lbs.): 39.9, Displacement (cu. in.): 44, Shaft Output: Horizontal, Shaft Diameter (in.): 1 7/16, Shaft Length (in.): 4 29/64, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/8 - 18, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.27 x 2.64, Compression Ratio: 9.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element air filter with foam pre-cleaner, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Mechanical, Fuel Filter: In line, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Ignition System: Electronic, Carburetor: Smart start, Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Yes, Bolt Circle (in.): 5 5/8, 7 3/4, Mounting Base L x W (in.): 3 1/2 x 7 1/4, Dimensions L x W x H (in.): 13 13/16 x 17 11/16 x 19, EPA/CARB Approval (California Air Resource Board): Yes 12V Electric Start Smart Start carburetor Solenoid shift starter PTO sleeve Cast iron cylinder liner Hydraulic valve lifters Spin-on, full-flow oil filter Overhead valve design Comes with muffler and exhaust manifold, engine controls, keyswitch, choke and throttle controls [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Kohler Magnum Horizontal Engine with Electric Start 12 HP, 1 1/8in. X 3 25/32in. Shaft, Model# M12S-471597

$1,499.98

Kohler 12 HP Magnum Horizontal Engine. The Magnums compact package disguises the tough-as-nails performance within. Born of heavy-duty cast iron and featuring an electronic ignition system and automatic compression release, Magnum engines provide durability and reliability throughout the years. U.S.A. Not for sale in California. Customers are responsible for checking local codes and regulations prior to purchase. Engine Displacement (cc): 477, Start Type: Electric, Engine Type: Magnum M12, Rated Power (HP): 12, Displacement (cu. in.): 29.07, Shaft Output: Horizontal, Shaft Diameter (in.): 1 1/8, Shaft Length (in.): 3 25/32, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 6 1/8, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.38 x 3.25, Compression Ratio: 6.6:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6, Fuel Pump: Mechanical, Fuel Filter: In line, Oil Capacity (qt.): 2, Lubrication System: Splash, Ignition System: Electronic, Governor System: Mechanical, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 15, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 5 5/8, 7 3/4, Mounting Base L x W (in.): 6 1/4 x 10 5/8, Dimensions L x W x H (in.): 18 11/16 x 17 7/16 x 20 1/16, EPA/CARB Approval (California Air Resource Board): No Kohler 12 HP Magnum air cooled, 4-cycle, horizontal engine Shaft: UNF threads [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Kohler Magnum Horizontal Engine with Electric Start 16 HP, 1 1/8in. x 3 25/32in. Shaft, Model# M16S-711591

$1,499.98

Kohler 16 HP Magnum Horizontal Engine. The Magnums compact package disguises the tough-as-nails performance within. Born of heavy-duty cast iron and featuring an electronic ignition system and automatic compression release, Magnum engines provide durability and reliability throughout the years. U.S.A. Engine Displacement (cc): 588, Start Type: Electric, Engine Type: Magnum M16, Rated Power (HP): 16, Torque (ft./lbs.): 28.2 @2,600 RPM, Displacement (cu. in.): 35.9, Shaft Output: Horizontal, Shaft Diameter (in.): 1 1/8, Shaft Length (in.): 3 25/32, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 6 1/8, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.75 x 3.25, Compression Ratio: 7.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6, Fuel Pump: Mechanical, Fuel Filter: In line, Oil Capacity (qt.): 2.25, Lubrication System: Splash, Ignition System: Electronic, Governor System: Mechanical, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 15, Muffler Included: Yes, Mounting Base L x W (in.): 6 1/4 x 10 5/8, Dimensions L x W x H (in.): 18 3/16 x 19 3/4 x 16 15/16 [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Powerhorse 208cc OHV MaXX Series Horizontal Engine

$179.99

The Powerhorse 208cc OHV horizontal engine is an easy-to-install solution for your small engine needs. With 208cc and 9.00 ft-lbs. of torque, it provides the power you need to run a wide range of equipment, including wood splitters, tillers and pressure washers. The patented design incorporates an industrial-strength cast iron cylinder sleeve, dual ball bearing crankshafts and an internal oil splash enhancement system. Low oil shutdown turns off the engine if it runs low on oil, preventing serious damage or failure. The recoil start has a compression release that helps you get running on the first pull. Combine these features with thorough U.S-based testing, dedicated customer/tech support and incredible value, and youll own one of the most reliable engines in the industry. Not for sale in California. Displacement (cc): 208, HP: 6, Application: Log splitters, pressure washers, air compressors, keyed water pumps, Shaft Output: Horizontal, Engine Type: OHV, Start Type: Recoil, Shaft Dimensions Diameter x L (in.): 3/4 x 2 7/16, Mounting Base L x W (in.): 6.03 x 3.05, Bolt Circle (in.): 3 5/8, PTO Height (in.): 4.17, Shaft Keyway (in.): 3/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24 tapped end, Max. RPM: 3850, Ignition System: Recoil, Cylinders (qty.): 1, Fuel Tank Capacity (qt.): 2.7, Oil Capacity (qt.): 1/2, Air Cleaner Type: Foam, Muffler Included: Yes, Low Oil Alert: Yes, Lubrication System: Oil splash, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 2.76 x 2.13, Cylinder Bore: Cast iron, Cooling System: Air cooled, Carburetor: Float, Governor System: Mechanical, EPA/CARB Approval (California Air Resource Board): No 6 HP previously rated 9 ft-lbs. of torque; Shaft 3/4in. x 2 7/16in. Bolt mount circle 3 5/8in. Approx. mounting base dim. 6.03in. x 3.05in. OHV engines deliver more power more efficiently by running smoother and cooler, resulting in longer engine life OHV improves fuel economy while reducing exhaust emissions and g... [Read more]

Store: Northern Tool and Equipment

Brand: PowerHorse

Tecumseh Horizontal Engine 10 HP, 1in. x 2 7/8in. Shaft, Model# HM100-159486V

$419.98

This Tecumseh 10 HP horizontal engine is smooth, quiet, easy to start and dependable, with plenty of torque for even the toughest outdoor jobs. Polyethylene fuel tanks resist dents, rusting and condensation. Features like Kleene-Aire filter system and cast iron cylinder sleeve mean long life and trouble-free operation. Common applications: Chippers, shredders, pressure washers, tillers, pumps and generators. U.S.A. Not for sale in California. Customers are responsible for checking local codes and regulations prior to purchase. Engine Displacement (cc): 358, Start Type: Recoil, Application: Chippers, shredders, pressure washers, tillers, pumps and generators, Engine Type: Medium frame - HM100, Rated Power (HP): 10, Displacement (cu. in.): 21.82, Shaft Output: Horizontal, Shaft Diameter (in.): 1, Shaft Length (in.): 2 7/8, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.125 x 2.532, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 4, Oil Capacity (qt.): 0.81 (26 oz.), Lubrication System: Splash, Ignition System: Electronic, Carburetor: Float, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Bolt Circle (in.): 3 5/8, 5, Mounting Base L x W (in.): 3 1/8 x 6 3/8, Dimensions L x W x H (in.): 17 3/4 x 15 1/2 x 15 Tecumseh 10 HP Horizontal Tiller Engine Flange Mount Kleene-Aire filter system gives you superior engine performance and protection Cast iron flywheel Full-Adjustable Carburetor Includes special dipstick for rear tine tillers [Read more]

Store: Northern Tool and Equipment

Brand: Tecumseh

Kohler 6.5 HP Horizontal Engine - 196cc, 3/4in. x 2 7/16in. Shaft, Model# PA-SH265-0011

$229.99

This Kohler horizontal engine is an excellent choice for log splitters, pressure washers and more. Engine Displacement (cc): 196, Start Type: Recoil, Application: Tillers, log splitters, pressure washers, compressors, cement mixers, tampers, construction equipment and more, Engine Type: OHV, Rated Power (HP): 6.5, Torque (ft./lbs.): 9.1, Displacement (cu. in.): 12.7, Shaft Output: CCW, Crankshaft: Hardened, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2.42, Shaft Keyway (in.): 3/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 / 24, Shaft Rotation (From PTO Shaft Side): CCW, PTO Height (in.): 4.173, Bearing Type: Dual Ball bearings, Cylinders (qty.): 1, Cylinder Bore: 2.8, Bore x Stroke (in.): 2.8 x 2.1, Compression Ratio: 8.5: 1, Cooling System: Air, Air Cleaner Type: Cyclonic, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 4.3, Fuel Filter: Yes, Oil Capacity (qt.): 0.63, Lubrication System: Splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float with bowl drain, Throttle Control: Engine-mounted, Choke System: Engine-mounted, Max. RPM: 3,600, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 3.625, Mounting Base L x W (in.): 6.378 x 3.149, Mounting Bolt Pattern L x W (in.): 6.378 x 3.149, Dimensions L x W x H (in.): 12.7 x 14.7 x 14, EPA/CARB Approval (California Air Resource Board): Yes Large muffler for quiet operation Large metal fuel tank with metal cap Low oil alert Dual air drains [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Honda Horizontal OHV Engine for Generators - 270cc, GX Series, Tapered 7/8 in. x 4 11/64in. Shaft, Model# GX270UT2VA2

$679.99

The Honda 270cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications: Generators. Limit two per customer. Engine Displacement (cc): 270, Start Type: Recoil, Application: Generator, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 8, Torque (ft./lbs.): 13.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: V type, Shaft Diameter (in.): 7/8 (tapered), Shaft Length (in.): 4 11/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer Fits USA generator sets Does not fit Honda PE generators or others with metric shaft 50-state compliant engine [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 1in. x 2 29/32in. Shaft, Model# GX630RQZB2

$1,349.98

With experience born on the raceways and roadways and a dedication to innovation, there s plenty of reasons to insist on the new Honda GX630 V-Twin engine. There s superior engine design, with a 90 configuration that reduces vibration and allows a compact footprint. There s superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. There s a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. There s even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. What better reason do you need? Engine Displacement (cc): 630, Start Type: Electric, Shift type, Application: Concrete saws, pressure washers, chippers/shredders, trenchers, vibratory rollers and ride-on cement trowels, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 20.3, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: Q Type, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, (Key size 6.3mm x 50mm), Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimens... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 620cc, GX Series, 1in. x 2 29/32in. Shaft, Model# GX620U1QAF

$1,399.98

The Honda 620cc GX Series OHV V-Twin Horizontal commercial-grade engine incorporates proven Honda engine technology and design innovations to make it the most advanced power source available for OEM and replacement use. Overhead Valve design gives more power from a smaller package, runs cooler and lowers fuel consumption as compared to conventional side-valve engines. Cast iron cylinder sleeve provides longer service life. V-Twin offers powerful performance and meets EPA and CARB emission level standards. Common applications include lawn tractors, mowers, utility vehicles, concrete saws, pressure washers, chippers/shredders, trenchers, generators, vibratory rollers and ride-on cement trowels. Engine Displacement (cc): 620, Start Type: Electric, Application: Lawn tractors, mowers, utility vehicles, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 18.1, Torque (ft./lbs.): 29.90 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q Type, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.6, Compression Ratio: 8.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Yes, Oil Capacity (qt.): 1.48, Lubrication System: Full pressure, Low Oil Alert: Yes, pressure indicator, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (wire), Choke Control: Remote (wire), Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 5/16 x 18 x 17 13/16, EPA/CARB Approval (California Air Resource Board): Yes Honda 620cc GX OHV V-Twin air-cooled, 4-stroke, 90 degrees, horizontal engine Centrifugal decompression Spin on oil... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with 2:1 Gear Reduction - 160cc, GX Series, 22mm x 2 3/32in. Shaft, Model# GX160UT1RH2

$569.98

The Honda 160cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pumps, pressure washers and go-karts. This engine has super hill climbing power for go-karts. Engine Displacement (cc): 160, Start Type: Recoil, Application: Pumps, pressure washers, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 4.8, Torque (ft./lbs.): 7.60 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: R type, Shaft Diameter (in.): 7/8 (22mm), Shaft Length (in.): 2 3/32, Shaft Keyway (in.): 3/16, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: R type 2:1 with wet clutch, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 1.8, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Alert: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (standard), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine for Non-Honda Pumps - 200cc, GX Series, Threaded 5/8in. x 2 7/16in. Shaft, Model# GX200UTTX2

$439.98

The Honda 200cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application is for non-Honda water pumps; ideal for US made centrifugal pumps Engine Displacement (cc): 200, Start Type: Recoil, Application: Non-Honda water pumps, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 5.5, Torque (ft./lbs.): 9.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: T type, Shaft Diameter (in.): 5/8 (threaded), Shaft Length (in.): 2 27/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 2.1, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, spark arrester, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 5/8 x 14 13/16 x 13 3/16, EPA/CARB Approval (California Air Resource Board): Yes Honda 200cc GX OHV air-cooled, 4-stroke, horizontal engine Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with 6:1 Gear Reduction - 120cc, GX Series, 3/4in. x 2 3/64in. Shaft, Model# GX120UT1HX2

$469.98

The Honda 120cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. 6:1 gear reduction for cement mixers and pumps. Engine Displacement (cc): 120, Start Type: Recoil, Application: Cement mixers, pumps, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 3.5, Torque (ft./lbs.): 5.40 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: H type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 3/32, Shaft Keyway (in.): 1/4, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: H type 6:1, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.4 x 1.7, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 2.1, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (standard), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes 6:1 can be rotated to position of application Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with 6:1 Gear Reduction for Cement Mixers - 390cc, 1in. x 3 5/32in. Shaft, Model# GX390UT2HA2

$899.98

The Honda 390cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application: cement mixers. Engine Displacement (cc): 390, Start Type: Recoil, Application: Cement mixers, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 11, Torque (ft./lbs.): 18.50 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: H type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 15/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: H type 6:1, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.5 x 2.5, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6.4, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, exhaust pipe protector, spark arrestor, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 1/16, Dimensions L x W x H (in.): 15 7/8 x 17 11/16 x 17 3/8, EPA/CARB Approval (California Air Resource Board): Yes Honda 390cc OHV air-cooled, 4-stroke, horizontal engine Includes gas tank and on/off switch [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 5/16in-24 tap x 3in. taper, Model# GX630RVXE1

$1,299.98

With experience born on the raceways and roadways and a dedication to innovation, there s plenty of reasons to insist on the new Honda GX630 V-Twin engine. There s superior engine design, with a 90 configuration that reduces vibration and allows a compact footprint. There s superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. There s a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. There s even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. What better reason do you need? Engine Displacement (cc): 630, Start Type: Electric, Shift type, Application: Generators, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 20.3, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: V type, Shaft Diameter (in.): (tapered), Shaft Length (in.): 3, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 3, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 7/8 x 16 1/8 x 17 3/16, EPA/CARB Approval (California Air Resource Board): Yes Generator tapered shaft 630cc air-cooled, ... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Briggs & Stratton Intek Snow Horizontal Engine - 205cc, 1in. x 2 27/64in. Shaft, Model# 12D412-0009-E1

$449.98

Briggs & Stratton 205cc Intek Snow Horizontal Engine. Intek engines are designed and built to provide the highest level of performance and power available. Compact OHV design increases engine efficiency and valve life. Aluminized Lo-Tone muffler offers superior sound reduction and corrosion resistance. This engine has large displacement for increased torque and easy removal of wet heavy snow. Freeze resistant recoil starter provides smooth easy starts. Ergonomically designed rewind handle and controls for easy use in cold, snowy weather. Computer optimized snow hood maintains constant carburetor and engine temperatures to optimize cold-weather performance and prevent freeze-up. U.S.A. Displacement (cc): 205, HP: 7.5, Application: Snow Blowers, Torque (ft./lbs.): 9.0, Shaft Output: Horizontal, Engine Type: Snow - OHV, Start Type: Recoil, Shaft Dimensions Diameter x L (in.): 1 x 2 27/64, Mounting Base L x W (in.): 6.38 x 3.12, Bolt Circle (in.): 3 5/8, PTO Height (in.): 4.17, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8-24, Max. RPM: 3,600, Ignition System: Magnetron Electronic, Cylinders (qty.): 1, Fuel Tank Capacity (qt.): 4, Oil Capacity (qt.): 18-20 oz, Muffler Included: Yes, Low Oil Alert: No, Lubrication System: Splash type, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 2.69 x 2.2, Cylinder Bore: Cast iron, Cooling System: Air Cooled, Carburetor: Float, Fuel Pump: No, Governor System: Mechanical, Auto Compression Release: Yes, Dimensions L x W x H (in.): 10 x 16.7 x 15.5, EPA/CARB Approval (California Air Resource Board): Yes Displacement: 12.57 cu. in. Freeze resistant recoil starter and mitt-grip handle Key stop switch [Read more]

Store: Northern Tool and Equipment

Brand: Briggs & Stratton

Kohler Command V-Twin Horizontal Engine with Electric Start - 18 HP, 1 1/8in. x 4in. Shaft, Model# PA-62500

$1,349.98

Kohler 18 HP Command V-Twin Horizontal Engine. This gasoline-driven, 4-cycle, 18 HP engine has reliable features including: OHV, cast iron V-Twin cylinder liners, and aluminum block construction. Engine Displacement (cc): 624, Start Type: 12V Electric, Application: Garden tractors, riding mowers, zero-turn mowers, utility vehicles, construction equipment, Engine Type: OHV, Rated Power (HP): 18, Torque (ft./lbs.): 32.2, Displacement (cu. in.): 38, Shaft Output: CCW, Crankshaft: Hardened, Shaft Diameter (in.): 1.125, Shaft Length (in.): 4, Shaft Keyway (in.): 0.25, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 / 20, Shaft Rotation (From PTO Shaft Side): CCW, PTO Height (in.): 6.125, Cylinders (qty.): 2, Cylinder Bore: 3in, Bore x Stroke (in.): 3 x 2.6, Compression Ratio: 8.5: 1, Cooling System: Air, Air Cleaner Type: Dual-element, Fuel Tank: No, Fuel Type: Gasoline, Fuel Pump: Mechanical, Fuel Filter: Yes, Oil Capacity (qt.): 2, Lubrication System: Full pressure lubrication with full flow filter, Low Oil Alert: No, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Smart choke float, Throttle Control: Remote, Choke Control: Remote, Max. RPM: 3,600, Charging System Amps: 15, Muffler Included: No, Bolt Circle (in.): 5.625, 7.75, 7, Mounting Base L x W (in.): 7.250 x 3.504, Mounting Bolt Pattern L x W (in.): 7.250 x 3.504, Dimensions L x W x H (in.): 14 x 17.7 x 19, EPA/CARB Approval (California Air Resource Board): Yes Oil Sentry Includes muffler and manifold Engine controls Key switch Throttle Choke Controls [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Honda Horizontal Engine with Cyclone Air Filter - 270cc, GX Series, 1in x 2 3/54in. Shaft, Model# GX270UTQXC9

$699.98

The Honda 270cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Engine Displacement (cc): 270, Start Type: Recoil, Application: Pressure washers, compressors, log splitters, chipper/shredders, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 8, Torque (ft./lbs.): 13.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Cyclone, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, inner vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal Engine - 160cc, 3/4in. x 2 7/16in. Shaft, Model# GC160AQHAF

$249.99

Honda 160cc premium residential, horizontal shaft engine features overhead cam technology. The GC series are incredibly quiet and utilize the worlds first internal timing belt. Honda has taken their technology one step further with the development of the GC Series, a line of rugged powerful and economical overhead cam engines designed specifically for home-use and recreational applications. Fixed throttle. U.S.A. Not for sale in CA. Engine Displacement (cc): 160, Start Type: Recoil, Application: Pressure washers, log splitters, Engine Type: GC series OHC - premium residential duty, Rated Power (HP): 4.6, Torque (ft./lbs.): 6.90 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Keyway (in.): 3/16, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Standard, Cylinders (qty.): 1, Cylinder Bore: Aluminum alloy, Bore x Stroke (in.): 2.5 x 2.0, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dry (paper) type, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 1.9, Fuel Pump: Yes, Oil Capacity (qt.): 0.61, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Fixed, Max. RPM: 3,600, Muffler Included: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 2 15/16 to 3 5/32, Dimensions L x W x H (in.): 13 5/16 x 14 1/2 x 13, EPA/CARB Approval (California Air Resource Board): Yes [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine for Non-Honda Pumps - 120cc, GX Series, Threaded 5/8in. x 2 7/16in. Shaft, Model# GX120UT2TX2

$399.99

The Honda 120cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include non-Honda water pumps. Limit two per customer. Engine Displacement (cc): 120, Start Type: Recoil, Application: Non-Honda water pumps, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 3.5, Torque (ft./lbs.): 5.40 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: T type, Shaft Diameter (in.): 5/8 (threaded), Shaft Length (in.): 2 7/16, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.4 x 1.7, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 2.1, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (standard), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes Honda 120cc GX OHV air-cooled, 4-stroke, horizontal engine Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer Does not fit Honda PE water pumps or NorthStar semi-trash pumps 50-state compliant engine [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHV Engine with Electric Start and 6:1 Gear Reduction for Cement Mixers - 270cc, GX Series, 1in. x 3 5/32in. Shaft, Model# GX270UT2HEA2

$999.98

The Honda 270cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application: cement mixers. Engine Displacement (cc): 270, Start Type: Recoil, Application: Cement mixers, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 8, Torque (ft./lbs.): 13.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: H type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 15/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: H type 6:1, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with 6:1 Gear Reduction for Cement Mixers - 340cc, GX Series, 1in. x 3 5/32in. Shaft, Model# GX340UT2HA2

$879.99

The Honda 340cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application: cement mixers. Limit two per customer. Engine Displacement (cc): 340, Start Type: Recoil, Application: Cement mixers, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 9.5, Torque (ft./lbs.): 16.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: H type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 15/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: H type 6:1, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.2 x 2.5, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6.4, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, exhaust pipe protector, spark arrestor, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 1/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Historical rating: 11 HP Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Doub... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 1in. x 2 29/32in. Shaft, Model# GX630RQAF1

$1,349.98

With experience born on the raceways and roadways and a dedication to innovation, there s plenty of reasons to insist on the new Honda GX630 V-Twin engine. There s superior engine design, with a 90 configuration that reduces vibration and allows a compact footprint. There s superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. There s a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. There s even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. What better reason do you need? Engine Displacement (cc): 630, Start Type: Electric, Shift type, Application: Concrete saws, pressure washers, chippers/shredders, trenchers, vibratory rollers and ride-on cement trowels, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 20.3, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: Q Type, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, (Key size 6.3mm x 50mm), Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimens... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine for Non-Honda Pumps - 160cc, GX Series, Threaded 5/8in. x 2 7/16in. Shaft, Model# GX160UT1TX2

$419.98

The Honda 160cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application is for non-Honda water pumps; ideal for US made centrifugal pumps. Engine Displacement (cc): 160, Start Type: Recoil, Application: Non-Honda water pumps, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 4.8, Torque (ft./lbs.): 7.60 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: T type, Shaft Diameter (in.): 5/8 (threaded), Shaft Length (in.): 2 7/16, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 1.8, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (standard), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 1in. x 2 29/32in. Shaft, Model# GX630RQDF2

$1,249.98

With experience born on the raceways and roadways and a dedication to innovation, there s plenty of reasons to insist on the new Honda GX630 V-Twin engine. There s superior engine design, with a 90 configuration that reduces vibration and allows a compact footprint. There s superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. There s a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. There s even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. What better reason do you need? Engine Displacement (cc): 630, Start Type: Electric, Shift type, Application: Lawn tractors, concrete saws, pressure washers, chippers/shredders, trenchers, vibratory rollers and ride-on cement trowels, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 20.3, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: Q Type, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, (Key size 6.3mm x 50mm), Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Remote (wire), Choke Control: Remote (wire), Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/3... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 610cc, GX Series, 1in. x 2 29/32in. Shaft, Model# GX610R1QYF

$1,199.99

The Honda 610cc GX Series OHV V-Twin Horizontal commercial-grade engine incorporates proven Honda engine technology and design innovations to make it the most advanced power source available for OEM and replacement use. Overhead valve design gives more power from a smaller package, runs cooler and lowers fuel consumption as compared to conventional side-valve engines. Cast iron cylinder sleeve provides longer service life. V-Twin offers powerful performance and meets EPA and CARB emission level standards. Common applications include lawn tractors, concrete saws, pressure washers, chippers/shredders, trenchers, generators, vibratory rollers and ride-on cement trowels. Engine Displacement (cc): 610, Start Type: Electric, Application: Lawn tractors, concrete saws, pressure washers, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 16.6, Torque (ft./lbs.): 29.20 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q Type, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.6, Compression Ratio: 8.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Yes, Oil Capacity (qt.): 1.48, Lubrication System: Full pressure, Low Oil Alert: No, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (wire), Choke Control: Remote (wire), Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 5/16 x 18 x 17 13/16, EPA/CARB Approval (California Air Resource Board): Yes Honda 610cc GX OHV V-Twin air-cooled, 4-stroke, 90 degrees, horizont... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHV Engine for Non-Honda Pumps - 270cc, GX Series, Threaded 1in. x 3 1/2in. Shaft, Model# GX270UT2PA2

$669.99

The Honda 270cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application is for non-Honda water pumps; ideal for US made centrifugal pumps. Limit two per customer. Engine Displacement (cc): 270, Start Type: Recoil, Application: Non-Honda water pumps, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 8, Torque (ft./lbs.): 13.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: P type, Shaft Diameter (in.): 1 (threaded), Shaft Length (in.): 3 1/2, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer 50-state compliant engine [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 5/16in. - 24 tap x 3in. taper, Model# GX630RVXA1

$1,299.98

With experience born on the raceways and roadways and a dedication to innovation, there s plenty of reasons to insist on the new Honda GX630 V-Twin engine. There s superior engine design, with a 90 configuration that reduces vibration and allows a compact footprint. There s superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. There s a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. There s even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. What better reason do you need? Engine Displacement (cc): 630, Start Type: Electric, Shift type, Application: Generators, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 20.3, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: V type, Shaft Diameter (in.): (tapered), Shaft Length (in.): 3, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 3, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 7/8 x 16 1/8 x 17 3/16, EPA/CARB Approval (California Air Resource Board): Yes Generator tapered shaft 630cc air-cooled, ... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 1in. x 2 29/32in. Shaft, Model# GX630RQXC2

$1,299.99

With experience born on the raceways and roadways and a dedication to innovation, theres plenty of reasons to insist on the new Honda GX630 V-Twin engine. Theres superior engine design, with a 90° configuration that reduces vibration and allows a compact footprint. Theres superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. Theres a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. Theres even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. Engine Displacement (cc): 630, Start Type: Electric, Shift type, Application: Concrete saws, pressure washers, chippers/shredders, trenchers, vibratory rollers and ride-on cement trowels, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 20.3, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: Q Type, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, (Key size 6.3mm x 50mm), Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 3, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 7/8 ... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHV Engine with 6:1 Gear Reduction - 120cc, GX Series, 3/4in. x 2 3/64in. Shaft, Model# GX120UT2HX2

$469.99

The Honda 120cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. 6:1 gear reduction for cement mixers and pumps. Limit two per customer. Engine Displacement (cc): 120, Start Type: Recoil, Application: Cement mixers, pumps, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 3.5, Torque (ft./lbs.): 5.40 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: H type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 3/32, Shaft Keyway (in.): 1/4, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: H type 6:1, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.4 x 1.7, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 2.1, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (standard), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes 6:1 can be rotated to position of application Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer 50-state compliant engine [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHV Engine with 2:1 Gear Reduction - 240cc, GX Series, 22mm x 2 3/32in. Shaft, Model# GX240UT1RA2

$869.98

The Honda 240cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include go-karts, agricultural equipment and small construction equipment. This engine has super hill climbing power for go-karts. Engine Displacement (cc): 240, Start Type: Recoil, Application: Commercial go-karts, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 7.1, Torque (ft./lbs.): 11.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: R type, Shaft Diameter (in.): 7/8 (22mm), Shaft Length (in.): 2 3/32, Shaft Keyway (in.): 1/4, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: R type 2:1 with wet clutch, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.9 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, exhaust pipe protector, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy startin... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine for Generators - 620cc, GX Series, 5/16in. x 3in. Tapered Shaft, Model# GX620U1VXA1

$1,399.98

The Honda 620cc GX Series OHV V-Twin Horizontal commercial-grade engine incorporates proven Honda engine technology and design innovations to make it the most advanced power source available for OEM and replacement use. Overhead Valve design gives more power from a smaller package, runs cooler and lowers fuel consumption as compared to conventional side-valve engines. Cast iron cylinder sleeve provides longer service life. V-Twin offers powerful performance and meets EPA and CARB emission level standards. Common application: generators. Engine Displacement (cc): 620, Start Type: Electric, Application: Generators, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 18.1, Torque (ft./lbs.): 29.90 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: V type, Shaft Diameter (in.): 5/16 (tapered), Shaft Length (in.): 3, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.6, Compression Ratio: 8.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Yes, Oil Capacity (qt.): 1.48, Lubrication System: Full pressure, Low Oil Alert: Yes, level indictator, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 3, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 5/16 x 18 x 17 13/16, EPA/CARB Approval (California Air Resource Board): Yes Honda 620cc GX OHV V-Twin air-cooled, 4-stroke, 90 degrees, horizontal engine Centrifugal decompression Spin on oil filter Keyswitch control box mounted on engine Low noise and vibration [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with Cyclone Air Cleaner - 160cc, GX Series, 3/4in. x 2 7/16in. Shaft, Model# GX160UT2QXC9

$479.99

The Honda 160cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Limit two per customer. Engine Displacement (cc): 160, Start Type: Recoil, Application: Pressure washers, compressors, log splitters, chipper/shredders, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 4.8, Torque (ft./lbs.): 7.60 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 1.8, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Cyclone, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, inner vent, Throttle Control: Remote (Cable), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (silent type, spark arrester, deflector), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes Honda 160cc GX OHV air-cooled, 4-s... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHC Engine for Generator - 160cc, GC Series, Tapered 3/4in. x 2 53/64in. Shaft, Model# GC160LAVXA

$299.98

Honda 160cc premium residential, horizontal shaft engine features overhead cam technology. The GC series are incredibly quiet and utilize the worlds first internal timing belt. Honda has taken their technology one step further with the development of the GC Series, a line of rugged powerful and economical overhead cam engines designed specifically for home-use and recreational applications. Common Applications: generators. Engine Displacement (cc): 160, Start Type: Recoil, Application: Generators, Engine Type: GC series OHC - premium residential duty, Rated Power (HP): 4.6, Torque (ft./lbs.): 6.90 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: V type, Shaft Diameter (in.): 3/4 (tapered), Shaft Length (in.): 2 53/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Aluminum alloy, Bore x Stroke (in.): 2.5 x 2.0, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dry (paper) type, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 1.9, Fuel Pump: Yes, Oil Capacity (qt.): 0.61, Lubrication System: Forced splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 2 15/16 to 3 5/32, Dimensions L x W x H (in.): 13 5/16 x 14 1/2 x 13, EPA/CARB Approval (California Air Resource Board): Yes Compact and lightweight design [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 5/16in. - 24 tap x 3in. taper, Model# GX630RVXA1

$1,299.99

With experience born on the raceways and roadways and a dedication to innovation, theres plenty of reasons to insist on the new Honda GX630 V-Twin engine. Theres superior engine design, with a 90° configuration that reduces vibration and allows a compact footprint. Theres superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. Theres a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. Theres even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. Engine Displacement (cc): 630, Start Type: Electric, Shift type, Application: Generators, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 20.3, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: V type, Shaft Diameter (in.): (tapered), Shaft Length (in.): 3, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 3, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 7/8 x 16 1/8 x 17 3/16, EPA/CARB Approval (California Air Resource Board): Yes Generator tapered shaft 630cc air-cooled, 4-stroke OHV engine 50-state... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHV Engine with Electric Start - 390cc, GX Series, 1in. x 3 31/64in. Shaft, Model# GX390UT1QNE2

$879.98

The Honda 390cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Engine Displacement (cc): 390, Start Type: Electric with recoil backup, Application: Pressure washers, compressors, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 11, Torque (ft./lbs.): 18.50 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.5 x 2.5, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6.4, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 10, Muffler Included: Silent, exhaust pipe protector, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 1/16, Dimensions L x W x H (in.): 15 7/8 x 17 11/16 x 17 3/8, EPA/CARB Approval (California Air Resource Board): Yes Honda 390cc GX ... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with Electric Start - 390cc, GX Series, 1in. x 3 31/64in. Shaft, Model# GX390UT2QNE2

$879.99

The Honda 390cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Limit two per customer. Engine Displacement (cc): 390, Start Type: Electric with recoil backup, Application: Pressure washers, compressors, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 11, Torque (ft./lbs.): 18.50 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.5 x 2.5, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6.4, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 10, Muffler Included: Silent, exhaust pipe protector, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 1/16, Dimensions L x W x H (in.): 15 7/8 x 17 11/16 x 17 3/8, EPA/CARB Approval (California Air Resource Boa... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHC Engine - 190cc, GC Series, 3/4in. x 2 7/16in. Shaft, Model# GC190LAQHAF

$279.98

Honda 190cc premium residential, horizontal shaft engine features overhead cam technology. The GC series are incredibly quiet and utilize the worlds first internal timing belt. Honda has taken their technology one step further with the development of the GC Series, a line of rugged powerful and economical overhead cam engines designed specifically for home-use and recreational applications. Common Applications: pressure washers, log splitters and chipper/shredders. Engine Displacement (cc): 190, Start Type: Recoil, Application: Pressure washers, log splitters, chippers/shredders, Engine Type: GC series OHC - premium residential duty, Rated Power (HP): 5.2, Torque (ft./lbs.): 8.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Standard, Cylinders (qty.): 1, Cylinder Bore: Aluminum alloy, Bore x Stroke (in.): 2.7 x 2.0, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dry (paper) type, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 1.9, Fuel Pump: Yes, Oil Capacity (qt.): 0.61, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Fixed, Max. RPM: 3,600, Muffler Included: Yes, Auto Compression Release: Yes, Dimensions L x W x H (in.): 13 5/8 x 14 1/2 x 13, EPA/CARB Approval (California Air Resource Board): Yes Internal timing belt Uniblock design Lightweight and efficient for noncommercial use [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with 2:1 Gear Reduction - 200cc, GX Series, 22mm x 2.05in. Shaft, Model# GX200UT2RH2

$629.99

The Honda 200cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include go-karts and farm equipment. Limit two per customer. Engine Displacement (cc): 200, Start Type: Recoil, Application: Farm equipment, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 5.5, Torque (ft./lbs.): 9.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: R type, Shaft Diameter (in.): 7/8 (22mm), Shaft Length (in.): 2 3/32, Shaft Keyway (in.): 1/4, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: R type 2:1 with wet clutch, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 2.1, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Ignition System: Forced splash, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (Cable), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, spark arrester, Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 5/8 x 14 13/16 x 13 3/16, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer 50-state compliant engine [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 620cc, GX Series, 1in. x 2 29/32in. Shaft, Model# GX620U1QYF

$1,399.98

The Honda 620cc GX Series OHV V-Twin Horizontal commercial-grade engine incorporates proven Honda engine technology and design innovations to make it the most advanced power source available for OEM and replacement use. Overhead Valve design gives more power from a smaller package, runs cooler and lowers fuel consumption as compared to conventional side-valve engines. Cast iron cylinder sleeve provides longer service life. V-Twin offers powerful performance and meets EPA and CARB emission level standards. Common applications include lawn tractors, concrete saws, pressure washers, chippers/shredders, trenchers, generators, vibratory rollers and ride-on cement trowels. Engine Displacement (cc): 620, Start Type: Electric, Application: Lawn tractors, mowers, utility vehicles, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 18.1, Torque (ft./lbs.): 29.90 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q Type, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.6, Compression Ratio: 8.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Yes, Oil Capacity (qt.): 1.48, Lubrication System: Full pressure, Low Oil Alert: Yes, pressure indicator, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (wire), Choke Control: Remote (wire), Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Not included, Flywheel Brake: Yes, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 5/16 x 18 x 17 13/16, EPA/CARB Approval (California Air Resource Board): Yes Honda 620cc GX OHV V-Twin air-cooled, 4-stroke, 90 de... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 1in. x 2 29/32in. Shaft, Model# GX630RQZE

$1,299.99

With experience born on the raceways and roadways and a dedication to innovation, theres plenty of reasons to insist on the new Honda GX630 V-Twin engine. Theres superior engine design, with a 90° configuration that reduces vibration and allows a compact footprint. There's superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. Theres a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. Theres even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. Engine Displacement (cc): 630, Start Type: Electric, Shift type, Application: Concrete saws, pressure washers, chippers/shredders, trenchers, vibratory rollers and ride-on cement trowels, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 20.3, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: Q Type, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, (Key size 6.3mm x 50mm), Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 3, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 7/8... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 1in. x 2 29/32in. Shaft, Model# GX630RQYF

$1,299.99

With experience born on the raceways and roadways and a dedication to innovation, theres plenty of reasons to insist on the new Honda GX630 V-Twin engine. There's superior engine design, with a 90° configuration that reduces vibration and allows a compact footprint. There's superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. Theres a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. Theres even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. The image shown is not reflective of the actual item shipped. There is no control panel as shown in the image. Engine Displacement (cc): 630, Start Type: Electric, Shift type, Application: Lawn tractors, concrete saws, pressure washers, chippers/shredders, trenchers, vibratory rollers and ride-on cement trowels, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 20.3, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: Q Type, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, (Key size 6.3mm x 50mm), Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Remote (wire), Choke Control: Remote (wire), Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Not included, Flywh... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 1 1/8in. x 3.54in. Shaft, Model# GX660RTDW

$1,429.98

With experience born on the raceways and roadways and a dedication to innovation, there s plenty of reasons to insist on the new Honda GX660 V-Twin engine. There s superior engine design, with a 90 configuration that reduces vibration and allows a compact footprint. There s superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. There s a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. There s even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. What better reason do you need? Engine Displacement (cc): 660, Start Type: Electric, Shift type, Application: Lawn tractors, mowers, utility vehicles, concrete saws, pressure washers, chippers/shredders, trenchers, vibratory rollers and ride-on cement trowels, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 21, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: T type, Shaft Diameter (in.): 1 1/8, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, (Key size 6.3mm x 70mm), Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Remote (wire), Choke Control: Remote (wire), Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.)... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 630cc, GX Series, 1in. x 2 29/32in. Shaft, Model# GX630RQYF

$1,299.98

With experience born on the raceways and roadways and a dedication to innovation, there s plenty of reasons to insist on the new Honda GX630 V-Twin engine. There s superior engine design, with a 90 configuration that reduces vibration and allows a compact footprint. There s superior construction, with a forged steel crankshaft and an integrated cylinder head. Fewer parts means better durability. There s a digital CDI ignition coil that ensures improved fuel economy and lowered emissions. There s even improved air cleaning, meaning that you can wait 5 times longer between filter changes. Honda even gives their engines a 3-year limited warranty. What better reason do you need? Engine Displacement (cc): 630, Start Type: Electric, Shift type, Application: Lawn tractors, concrete saws, pressure washers, chippers/shredders, trenchers, vibratory rollers and ride-on cement trowels, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 20.3, Torque (ft./lbs.): 35.2, Shaft Output: Horizontal, Crankshaft: Q Type, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, (Key size 6.3mm x 50mm), Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, UNF2B, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Integrated, Bore x Stroke (in.): 3.1 x 2.8, Compression Ratio: 9.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element / Cylindrical, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Boost Type, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Low Oil Alert: Yes, Ignition System: Electonic, Digital CDI with variable ignition timing, Governor System: Mechanical, Carburetor: 2-barrel, fuel cut solenoid, inner vent, Throttle Control: Remote (wire), Choke Control: Remote (wire), Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine for Generators - 160cc, GX Series, Tapered 3/4in. x 2 53/64in. Shaft, Model# GX160UT1VA2

$399.98

The Honda 160cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications: Generators. Engine Displacement (cc): 160, Start Type: Recoil, Application: Generators, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 4.8, Torque (ft./lbs.): 7.60 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: V type, Shaft Diameter (in.): 3/4 (tapered), Shaft Length (in.): 2 53/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 1.8, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (standard), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Cast iron cylinder bore Double walled heavy-duty tank with in tank fuel strainer Fits USA applications Does not fit Honda PE generators with metric shaft [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with Electric Start - 240cc, GX Series, 1in. x 3 31/64in. Shaft, Model# GX240UT1QAE2

$759.99

The Honda 240cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Limit two per customer. Engine Displacement (cc): 240, Start Type: Electric with recoil backup, Application: Pressure washers, compressors, log splitters, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 7.1, Torque (ft./lbs.): 11.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft Keyway (in.): 1/4, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.9 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 3, Muffler Included: Standard, exhaust pipe protector, spark arrestor, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression fo... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHV Engine with 2:1 Gear Reduction - 240cc, GX Series, 22mm x 2 3/32in. Shaft, Model# GX240UT2RA2

$869.99

The Honda 240cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include go-karts, agricultural equipment and small construction equipment. This engine has super hill climbing power for go-karts. Limit two per customer. Engine Displacement (cc): 240, Start Type: Recoil, Application: Commercial go-karts, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 7.1, Torque (ft./lbs.): 11.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: R type, Shaft Diameter (in.): 7/8 (22mm), Shaft Length (in.): 2 3/32, Shaft Keyway (in.): 1/4, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: R type 2:1 with wet clutch, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.9 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, exhaust pipe protector, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Automatic decomp... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHV Engine for Non-Honda Pumps - 240cc, GX Series, Threaded 1in. x 3 1/2in. Shaft, Model# GX240UT2PA2

$649.99

The Honda 240cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application is for non-Honda water pumps; ideal for US made centrifugal pumps. Limit two per customer. Engine Displacement (cc): 240, Start Type: Recoil, Application: Non-Honda water pumps, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 7.1, Torque (ft./lbs.): 11.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: P type, Shaft Diameter (in.): 1 (threaded), Shaft Length (in.): 3 1/2, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.9 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, exhaust pipe protector, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer Fits USA p... [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHV Engine with 6:1 Gear Reduction for Cement Mixers - 390cc, 1in. x 3 5/32in. Shaft, Model# GX390UT2HA2

$899.99

The Honda 390cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application: cement mixers. Limit two per customer. Engine Displacement (cc): 390, Start Type: Recoil, Application: Cement mixers, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 11, Torque (ft./lbs.): 18.50 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: H type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 15/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: H type 6:1, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.5 x 2.5, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6.4, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, exhaust pipe protector, spark arrestor, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 1/16, Dimensions L x W x H (in.): 15 7/8 x 17 11/16 x 17 3/8, EPA/CARB Approval (California Air Resource Board): Yes Honda 390cc OHV air-cooled, 4-stroke, horizontal engine Includes gas tank and on/off switch 50-state compliant engine [Read more]

Store: Northern Tool

Brand: Honda Engines

Honda Horizontal OHV Engine - 120cc, GX Series, 3/4in. x 2 7/16in. Shaft, Model# GX120UT1QX2

$349.98

The Honda 120cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Engine Displacement (cc): 120, Start Type: Recoil, Application: Pressure washers, compressors, log splitters, chipper/shredders, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 3.5, Torque (ft./lbs.): 5.40 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Keyway (in.): 3/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.4 x 1.7, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 2.1, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (standard, spark arrestor), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes Honda 120cc GX OHV air-cooled, 4-stroke, horizontal engine Automatic decompression for easy starting Heavy-duty ball bearing supporte... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 670cc, GX Series, 1 1/8in. x 3.54in. Shaft, Model# GX670RTDW

$1,499.98

The Honda 610cc GX Series OHV V-Twin Horizontal commercial-grade engine incorporates proven Honda engine technology and design innovations to make it the most advanced power source available for OEM and replacement use. Overhead Valve design gives more power from a smaller package, runs cooler and lowers fuel consumption as compared to conventional side-valve engines. Cast iron cylinder sleeve provides longer service life. V-Twin offers powerful performance and meets EPA and CARB emission level standards. Common applications include lawn tractors, mowers, utility vehicles, concrete saws, pressure washers, chippers/shredders, trenchers, generators, vibratory rollers and ride-on cement trowels. Engine Displacement (cc): 670, Start Type: Electric, Application: Lawn tractors, mowers, utility vehicles, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 20.5, Torque (ft./lbs.): 33.90 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: T type, Shaft Diameter (in.): 1 1/8, Shaft Length (in.): 3 35/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.8, Compression Ratio: 8.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Yes, Oil Capacity (qt.): 2.01, Lubrication System: Full pressure, Low Oil Alert: No, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (wire), Choke Control: Remote (wire), Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Not included, Flywheel Brake: No, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 16 3/16 x 18 1/2 x 18, EPA/CARB Approval (California Air Resource Board): Yes Honda 670cc GX ... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines