Honda Horizontal OHV Engine for Non-Honda Pumps 200cc, GX Series, Threaded 5/8in. x 2 7/16in. Shaft, Model# GX200UTTX2

$439.98

The Honda 200cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application is for non-Honda water pumps; ideal for US made centrifugal pumps Engine Displacement (cc): 200, Start Type: Recoil, Application: Non-Honda water pumps, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 5.5, Torque (ft./lbs.): 9.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: T type, Shaft Diameter (in.): 5/8 (threaded), Shaft Length (in.): 2 27/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 2.1, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, spark arrester, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 5/8 x 14 13/16 x 13 3/16, EPA/CARB Approval (California Air Resource Board): Yes Honda 200cc GX OHV air-cooled, 4-stroke, horizontal engine Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Torin Big Red Folding Engine Hoist 1-Ton Capacity

$179.99

This Torin Big Red heavy-duty Folding Shop Crane provides big lifting power for smaller shops. A lifting range from 1in. to 78 3/4in. and a 4-hole telescoping boom deliver needed flexibility. Folds for easy storage. Four heavy-duty steel casters provide added mobility. Heavy-duty 3-ton long RAM jack. Boom is reinforced to increase strength and eliminate flex. Wide base offers maximum stability. Heavy steel hook with safety latch. Truck ship. Capacity (lbs.): 2,000, Lift Range (in.): 1 - 78 3/4, Boom Holes (qty.): 4, Wheels (qty.): 4, Foldable: Yes, Dimensions L x W x H (in.): 52 x 44 5/8 x 57 1/2 [Read more]

Store: Northern Tool and Equipment

Brand: Torin Big Red

Honda Horizontal OHV Engine with 6:1 Gear Reduction for Cement Mixers - 270cc, GX Series, 1in. x 3 5/32in. Shaft, Model GX270UHA2, Model# GX270UTHA2

$799.98

The Honda 270cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application: cement mixers. Engine Displacement (cc): 270, Start Type: Recoil, Application: Cement mixers, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 8, Torque (ft./lbs.): 13.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: H type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 15/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: H type 6:1, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Honda 270cc OHV air-cooled, 4-stroke, horizontal engine [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine 160cc, GX Series, 3/4in. x 2 7/16in. Shaft, Model# GX160UT1QX2

$369.98

The Honda 160cc GX Series OHV Commercial-Grade Horizontal Engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, log splitters and chipper/shredders. Engine Displacement (cc): 160, Start Type: Recoil, Application: Pressure washers, compressors, log splitters, chipper/shredders, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 4.8, Torque (ft./lbs.): 7.60 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Keyway (in.): 3/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 1.8, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (standard), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes Honda 160cc OHV air-cooled, 4-stroke, horizontal engine. Automatic decompression for easy starting Heavy... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with Electric Start 340cc, GX Series, 1in. x 3 31/64in. Shaft, Model# GX340UT1QNE2

$879.98

The Honda 340cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Engine Displacement (cc): 340, Start Type: Electric with recoil backup, Application: Pressure washers, compressors, log splitters, chipper/shredders, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 9.5, Torque (ft./lbs.): 16.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.2 x 2.5, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6.4, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 10, Muffler Included: Standard, exhaust pipe protector, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 1/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Boa... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine 340cc, GX Series, 1in. x 3 31/64in. Shaft, Model# GX340UT1QA2

$679.98

The Honda 340cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Engine Displacement (cc): 340, Start Type: Recoil, Application: Chipper/shredders, log splitters, compressors, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 9.5, Torque (ft./lbs.): 16.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.2 x 2.5, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6.4, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, exhaust pipe protector, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 1/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Honda 340 OHV air-cooled, 4-stroke, horizontal engine Hi... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with 6:1 Gear Reduction for Cement Mixers - 390cc, 1in. x 3 5/32in. Shaft, Model# GX390UT1HA2

$899.98

The Honda 390cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application: cement mixers. Engine Displacement (cc): 390, Start Type: Recoil, Application: Cement mixers, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 11, Torque (ft./lbs.): 18.50 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: H type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 15/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: H type 6:1, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.5 x 2.5, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6.4, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, exhaust pipe protector, spark arrestor, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 1/16, Dimensions L x W x H (in.): 15 7/8 x 17 11/16 x 17 3/8, EPA/CARB Approval (California Air Resource Board): Yes Honda 390cc OHV air-cooled, 4-stroke, horizontal engine Includes gas tank and on/off switch [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine 200cc, GX Series, 3/4in. x 2 7/16in. Shaft, Model# GX200UTQX2

$399.98

The Honda 200cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Engine Displacement (cc): 200, Start Type: Recoil, Application: Pressure washers, compressors, log splitters, Engine Type: GX series OHV - commercial duty, Torque (ft./lbs.): 9.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Keyway (in.): 1/4, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 2.1, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (Cable), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, spark arrester, Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 5/8 x 14 13/16 x 13 3/16, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda OEM Engine Maintenance Kit Fits Item#s 6065, 60651, 60109, 6013, 6066 & 60133, Model# HONDAKIT5

$29.98

Honda OEM engine maintenance kit includes air filter, spark plug, 2-qts. engine oil, STA-BIL fuel stabilizer and instructions. Consult Honda engine owners manual for maintenance instructions, or download from Honda Internet site if owners manual no longer exists. U.S.A. For use with Honda engines: GX240 & GX270 with cyclone air filter and GX340 & GX390 with standard or cyclone air filter Fits Item#s 6065, 60651, 60109, 6013, 6066 and 60133 [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine for Non-Honda Pumps 270cc, GX Series, Threaded 1in. x 3 1/2in. Shaft, Model# GX270UTPA2

$669.98

The Honda 270cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application is for non-Honda water pumps; ideal for US made centrifugal pumps. Engine Displacement (cc): 270, Start Type: Recoil, Application: Non-Honda water pumps, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 8, Torque (ft./lbs.): 13.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: P type, Shaft Diameter (in.): 1 (threaded), Shaft Length (in.): 3 1/2, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with Electric Start and 6:1 Gear Reduction for Cement Mixers 270cc, GX Series, 1in. x 3 5/32in. Shaft, Model# GX270HEA2

$999.98

The Honda 270cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application: cement mixers. Engine Displacement (cc): 270, Start Type: Recoil, Application: Cement mixers, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 8, Torque (ft./lbs.): 13.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: H type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 15/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: H type 6:1, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda GX Muffler Kit 24 HP Engine, Right, Model# VHRM4

$169.99

Hi mount right (facing the PTO shaft) discharge muffler, for our #60242 and 60243 engines. Sides: Right, Application: Hi-mount, Engine Type: Honda, HP: 24 [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start - 620cc, GX Series, 1in. x 2.91in. Shaft, Model# GX620K1QXA

$1,399.98

The Honda 620cc GX Series OHV V-Twin Horizontal commercial-grade engine incorporates proven Honda engine technology and design innovations to make it the most advanced power source available for OEM and replacement use. Overhead Valve design gives more power from a smaller package, runs cooler and lowers fuel consumption as compared to conventional side-valve engines. Cast iron cylinder sleeve provides longer service life. V-Twin offers powerful performance and meets EPA and CARB emission level standards. Common applications include lawn tractors, concrete saws, pressure washers, chippers/shredders, trenchers, generators, vibratory rollers and ride-on cement trowels. Engine Displacement (cc): 620, Start Type: Electric, Application: Lawn tractors, concrete saws, pressure washers, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 18.1, Torque (ft./lbs.): 29.90 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q Type, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.6, Compression Ratio: 8.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Yes, Oil Capacity (qt.): 1.48, Lubrication System: Full pressure, Low Oil Alert: Yes, level indictator, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (rod), Choke Control: Remote (rod), Max. RPM: 3,600, Charging System Amps: 3, Muffler Included: Not included, Flywheel Brake: Yes, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 5/16 x 18 x 17 13/16, EPA/CARB Approval (California Air Resource Board): Yes Honda 620cc GX OHV V-Twin air-cooled, 4-stroke, 90 degrees, horizontal engine Q-type crankcase cover for side-mount muffler 12V, 3 Amp cha... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine 270cc, GX Series, 1in. x 3 31/64in. Shaft, Model# GX270UTQA2

$619.98

The Honda 270cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Engine Displacement (cc): 270, Start Type: Recoil, Application: Chipper/shredders, log splitters, compressors, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 8, Torque (ft./lbs.): 13.10 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with Cyclone Air Cleaner - 390cc, GX Series, 1in. x 3 31/64in. Shaft, Model# GX390UT1QXC9

$779.98

The Honda 390cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Engine Displacement (cc): 390, Start Type: Recoil, Application: Pressure washers, compressors, log splitters, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 11, Torque (ft./lbs.): 18.50 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.5 x 2.5, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Cyclone, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6.4, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, inner vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Silent, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 1/16, Dimensions L x W x H (in.): 15 7/8 x 17 11/16 x 17 3/8, EPA/CARB Approval (California Air Resource Board): Yes Honda 390cc OHV air-cooled, 4-stroke, horizontal engine Cyclone air cleaner w/inner-vent carburetor [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with 6:1 Gear Reduction for Cement Mixers 240cc, 1in. x 3 5/32in. Shaft, Model# GX240UT1HA2

$729.98

The Honda 240cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application: cement mixers. Engine Displacement (cc): 240, Start Type: Recoil, Application: Cement mixers, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 7.1, Torque (ft./lbs.): 11.30 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: H type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 15/64, Shaft Keyway (in.): 1/4, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: H type 6:1, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.9 x 2.3, Compression Ratio: 8.2:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5.6, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Standard, exhaust pipe protector, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 3/16 to 3 11/16, Dimensions L x W x H (in.): 15 x 16 7/8 x 16 1/8, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda GX Muffler Kit 24 HP Engine, Left, Model# VHLM4

$169.99

Original equipment premium-quality Honda engine muffler kit. Sides: Left, Application: Hi-mount, Engine Type: Honda Honda left-hand muffler only (starter side) For Honda GX610, GX620, & GX670 V-Twin engines [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda OEM Engine Maintenance Kit Fits Item#s 601851, 601852, 602052, 60242 & 60243, Model# HONDAKIT6

$69.98

Honda OEM engine maintenance kit includes prefilter, air filter, 2 spark plugs, 2-qts. engine oil, oil filter, fuel filter, STA-BIL fuel stabilizer and instructions. Consult Honda engine owners manual for maintenance instructions, or download from Honda Internet site if owners manual no longer exists. U.S.A. For use with Honda engines: GX & GV 610, 620 with standard air filter and serial number starting with 2 and GX & GXV670 with standard air filter and serial number starting with 1 Fits Item#s 601851, 601852, 602052, 60242 and 60243 [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda OEM Engine Maintenance Kit Fits Item#s 6059, 605921, 605913, 60597, 60596, 60591, 60593 & 6067, Model# HONDAKIT3

$24.98

Honda OEM engine maintenance kit includes air filter, spark plug, 1-qt. engine oil, STA-BIL fuel stabilizer and instructions. Consult Honda engine owners manual for maintenance instructions, or download from Honda Internet site if owners manual no longer exists. U.S.A. For use with Honda engines: GX110 and GX120 with cyclone air filter and GX140, GX160 & GX200 with standard or cyclone air filter Fits Item#s 6059, 605921, 605913, 60597, 60596, 60591, 60593 & 6067 [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Generac Generator Engine Maintenance Kit For Generators with 1.6L engines, Model# 5657

$24.98

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 1.6L engines. U.S.A. Application: Engine maintenance kit, Compatible With: Liquid-cooled standby generators, Kit Includes: Spark plugs, air filter, oil filter, wrench, funnel and chamois [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Generator Engine Maintenance Kit For Generators with 589cc Generac OHVI engines, Model# 5663

$16.98

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 589cc Generac OHVI engines. U.S.A. Compatible With: Item# 167131, Kit Includes: Spark plugs, air filter, oil filter, wrench, funnel and chamois [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Generator Engine Maintenance Kit For Generators with 4.2L engines, Model# 5658

$39.99

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 4.2L engines. U.S.A. Compatible With: Item#s 167139, Kit Includes: Spark plugs, air filter, oil filter, wrench, funnel and chamois [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Generator Engine Maintenance Kit For Generators with 410cc Generac OHVI Engines, Model# 5719

$12.98

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 410cc Generac OHVI engines. U.S.A. Compatible With: Item#s 166543, 167927, 167928, 167929, 167145, 167147, 169148, 169139, 169135 and 166540, Kit Includes: Spark plugs, air filter, oil filter, wrench, funnel and chamois [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Generator Engine Maintenance Kit For Generators with 992cc Generac OHVI Engines, Model# 5721

$24.98

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 992cc Generac OHVI engines. U.S.A. Compatible With: Item#s 167933, 165883, Kit Includes: Spark plugs, air filter, oil filter, wrench, funnel and chamois [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Generator Engine Maintenance Kit For Generators with 410cc Generac OHV Engines, Model# 5662

$14.98

This Generator Engine Maintenance Kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 410cc Generac OHV engines. U.S.A. Compatible With: Item# 167130, Kit Includes: Spark plugs, air filter, oil filter, wrench, funnel and chamois [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Generator Engine Maintenance Kit For Generators with 6.8L engines, Model# 5660

$99.98

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 6.8L engines. U.S.A. Compatible With: Item#s 167302, 167303, 167304, Kit Includes: Spark plugs, air filter, oil filter, wrench, funnel and chamois [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Generator Engine Maintenance Kit For Generators with 4.6L engines, Model# 5659

$99.98

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 4.6L engines. U.S.A. Compatible With: Item# 167299, Kit Includes: Spark plugs, air filter, oil filter, wrench, funnel and chamois [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Generator Engine Maintenance Kit For Generators with 2.4L engines, Model# 5656

$34.99

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 2.4L engines. U.S.A. Compatible With: Item#s 167136, 167137, 167138, 167113, 167211, 167210, 167139, 167298, Kit Includes: Spark plugs, air filter, oil filter, wrench, funnel and chamois [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Generator Engine Maintenance Kit For Generators with 999cc Generac OHVI Engines, Model# 5665

$16.98

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 999cc Generac OHV engines. U.S.A. Compatible With: Item# 165887, 169115 and 167135, Kit Includes: Spark plugs, air filter, oil filter, wrench, funnel and chamois [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Generator Engine Maintenance Kit For Generators with 220cc Generac OHVI Engines, Model# 5718

$12.98

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 220cc Generac OHVI engines. U.S.A. Compatible With: Item#s 169140 and 165886, Kit Includes: Spark plugs, air filter, oil filter, wrench, funnel and chamois [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Generator Engine Maintenance Kit For Generators with 760/990cc Generac OHVI Engines, Model# 5664

$16.98

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 760/990cc Generac OHVI engines. U.S.A. Compatible With: Item#s 167132, 167133 and 167134, Kit Includes: Spark plugs, air filter, oil filter, wrench, funnel and chamois [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Generator Engine Maintenance Kit For Generators with 389cc Generac OHV Engines, Model# 5777

$14.98

This kit from Generac includes everything you will need to keep your generator in top running condition. For liquid-cooled standby generators with 389cc Generac OHVI engines. U.S.A. Compatible With: Item#s 166541, 213500 and 166542, Kit Includes: Spark plugs, air filter, oil filter, wrench, funnel and chamois [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Kohler Command Pro Horizontal Engine with Electric Start 15 HP, 1in. x 3.49in. Shaft, Model# CH15ST-44503

$1,349.98

Kohler 15 HP Command Pro Horizontal Engine. This single-cylinder, air-cooled, 15 HP engine is built to last. OHV, a cast iron cylinder liner, and aluminum block construction make the 4-cycle, gasoline-powered Command Pro ready for the long haul. Engine Displacement (cc): 426, Start Type: Electric with recoil start, Engine Type: Command Pro - CH15 - OHV, Rated Power (HP): 15, Torque (ft./lbs.): 24.8, Displacement (cu. in.): 26, Shaft Output: Horizontal, Shaft Diameter (in.): 1, Shaft Length (in.): 3 1/2, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.55 x 2.64, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element air filter with foam pre-cleaner, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 5, Fuel Pump: Mechanical, Oil Capacity (qt.): 2, Lubrication System: Full pressure, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Fuel injection, Max. RPM: 3,600, Auto Compression Release: Yes, Dimensions L x W x H (in.): 13 7/16 x 19 13/16 x 17 11/16, EPA/CARB Approval (California Air Resource Board): Yes [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Swisher Trailcutter 52in., 18.5 HP Engine, Model# RTB18552

$2,199.98

Blaze a trail or clear a field year-round with this tough, dependable workhorse. Simply hitch a Trailcutter to your ATV or lawn tractor and clear the most rugged overgrown areas with ease. U.S.A. Not for sale in CA Engine: Briggs & Stratton, HP: 18.5, Cutting Width (in.): 52, Stems Cutting Capacity (in.): 3, Start Type: Electric, Dimensions L x W x H (in.): 65 x 75 x 35 52in. cutting deck Battery not included Attaches easily to an ATV or lawn tractor Heavy-duty swinging blades Enhanced deck and hitch system [Read more]

Store: Northern Tool and Equipment

Brand: Swisher

Honda Vertical OHC Engine 160cc, 25mm x 3 5/32in. Shaft, Model# GCV160AS3A

$229.99

This Honda vertical engine powers lawn mowers, chipper/vacs, log splitters and pressure washers. U.S.A. Engine Displacement (cc): 160, Start Type: Recoil, Application: lawn mowers, chipper/vacs, log splitters, pressure washers, Engine Type: GCV series OHV - commercial duty, Rated Power (HP): 4.4, Torque (ft./lbs.): 6.90 at 2,500 RPM, Shaft Output: Vertical, Crankshaft: N3 type, Shaft Diameter (in.): 63/64 (25mm), Shaft Length (in.): 3 5/32, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Cylinders (qty.): 1, Cylinder Bore: Aluminum alloy, Bore x Stroke (in.): 2.5 x 2.0, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dry (paper), Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 0.98, Oil Capacity (qt.): 0.58, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Max. RPM: 3,600, Muffler Included: Yes, Flywheel Brake: Yes, Bolt Circle (in.): 8 1/2, Dimensions L x W x H (in.): 14 3/8 x 13 x 13 13/16, EPA/CARB Approval (California Air Resource Board): Yes Air-cooled, 4-stroke, OHC single cylinder engine [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHC Engine for Generator 160cc, GC Series, Tapered 3/4in. x 2 53/64in. Shaft, Model# GC160LAVXA

$299.98

Honda 160cc premium residential, horizontal shaft engine features overhead cam technology. The GC series are incredibly quiet and utilize the worlds first internal timing belt. Honda has taken their technology one step further with the development of the GC Series, a line of rugged powerful and economical overhead cam engines designed specifically for home-use and recreational applications. Common Applications: generators. Engine Displacement (cc): 160, Start Type: Recoil, Application: Generators, Engine Type: GC series OHC - premium residential duty, Rated Power (HP): 4.6, Torque (ft./lbs.): 6.90 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: V type, Shaft Diameter (in.): 3/4 (tapered), Shaft Length (in.): 2 53/64, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Ball, Cylinders (qty.): 1, Cylinder Bore: Aluminum alloy, Bore x Stroke (in.): 2.5 x 2.0, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dry (paper) type, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 1.9, Fuel Pump: Yes, Oil Capacity (qt.): 0.61, Lubrication System: Forced splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 2 15/16 to 3 5/32, Dimensions L x W x H (in.): 13 5/16 x 14 1/2 x 13, EPA/CARB Approval (California Air Resource Board): Yes Compact and lightweight design [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with 2:1 Gear Reduction 160cc, GX Series, 22mm x 2 3/32in. Shaft, Model# GX160UT1RH2

$569.98

The Honda 160cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pumps, pressure washers and go-karts. This engine has super hill climbing power for go-karts. Engine Displacement (cc): 160, Start Type: Recoil, Application: Pumps, pressure washers, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 4.8, Torque (ft./lbs.): 7.60 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: R type, Shaft Diameter (in.): 7/8 (22mm), Shaft Length (in.): 2 3/32, Shaft Keyway (in.): 3/16, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Gear Reduction: R type 2:1 with wet clutch, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 1.8, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Alert: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (standard), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda V-Twin Horizontal OHV Engine with Electric Start 610cc, GX Series, 1in. x 2 29/32in. Shaft, Model# GX610R1QYF

$1,349.98

The Honda 610cc GX Series OHV V-Twin Horizontal commercial-grade engine incorporates proven Honda engine technology and design innovations to make it the most advanced power source available for OEM and replacement use. Overhead Valve design gives more power from a smaller package, runs cooler and lowers fuel consumption as compared to conventional side-valve engines. Cast iron cylinder sleeve provides longer service life. V-Twin offers powerful performance and meets EPA and CARB emission level standards. Common applications include lawn tractors, concrete saws, pressure washers, chippers/shredders, trenchers, generators, vibratory rollers and ride-on cement trowels. Engine Displacement (cc): 610, Start Type: Electric, Application: Lawn tractors, concrete saws, pressure washers, Engine Type: GX series OHV V-Twin - commercial duty, Rated Power (HP): 16.6, Torque (ft./lbs.): 29.20 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q Type, Shaft Diameter (in.): 1, Shaft Length (in.): 2 29/32, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 2, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.0 x 2.6, Compression Ratio: 8.3:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Not included, Fuel Type: Gasoline, Fuel Pump: Yes, Oil Capacity (qt.): 1.48, Lubrication System: Full pressure, Low Oil Alert: No, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (wire), Choke Control: Remote (wire), Max. RPM: 3,600, Charging System Amps: 20, Muffler Included: Not included, Flywheel Brake: No, Bolt Circle (in.): 5, 6 1/2, 7 3/4, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 21/32, Dimensions L x W x H (in.): 15 5/16 x 18 x 17 13/16, EPA/CARB Approval (California Air Resource Board): Yes Honda 610cc GX OHV V-Twin air-cooled, 4-stroke, 90 degrees, horizont... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal Engine 160cc, 3/4in. x 2 7/16in. Shaft, Model# GC160AQHAF

$249.99

Honda 160cc premium residential, horizontal shaft engine features overhead cam technology. The GC series are incredibly quiet and utilize the worlds first internal timing belt. Honda has taken their technology one step further with the development of the GC Series, a line of rugged powerful and economical overhead cam engines designed specifically for home-use and recreational applications. Fixed throttle. U.S.A. Not for sale in CA. Engine Displacement (cc): 160, Start Type: Recoil, Application: Pressure washers, log splitters, Engine Type: GC series OHC - premium residential duty, Rated Power (HP): 4.6, Torque (ft./lbs.): 6.90 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2 7/16, Shaft Keyway (in.): 3/16, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Bearing Type: Standard, Cylinders (qty.): 1, Cylinder Bore: Aluminum alloy, Bore x Stroke (in.): 2.5 x 2.0, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dry (paper) type, Fuel Tank: Standard, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 1.9, Fuel Pump: Yes, Oil Capacity (qt.): 0.61, Lubrication System: Forced splash, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Fixed, Max. RPM: 3,600, Muffler Included: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 2 15/16 to 3 5/32, Dimensions L x W x H (in.): 13 5/16 x 14 1/2 x 13, EPA/CARB Approval (California Air Resource Board): Yes [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine for Non-Honda Pumps 160cc, GX Series, Threaded 5/8in. x 2 7/16in. Shaft, Model# GX160UT1TX2

$419.98

The Honda 160cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common application is for non-Honda water pumps; ideal for US made centrifugal pumps. Engine Displacement (cc): 160, Start Type: Recoil, Application: Non-Honda water pumps, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 4.8, Torque (ft./lbs.): 7.60 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: T type, Shaft Diameter (in.): 5/8 (threaded), Shaft Length (in.): 2 7/16, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 4 11/64, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 2.7 x 1.8, Compression Ratio: 8.5:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 3.3, Oil Capacity (qt.): 0.63, Lubrication System: Forced splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Manual, Choke Control: Manual, Max. RPM: 3,600, Muffler Included: Yes, (standard), Auto Compression Release: Yes, Bolt Circle (in.): 3 5/8, Mounting Base L x W (in.): 6 3/8 x 3 5/32 to 3 11/32, Dimensions L x W x H (in.): 12 x 13 3/8 x 12 1/2, EPA/CARB Approval (California Air Resource Board): Yes Automatic decompression for easy starting Heavy-duty ball bearing supported crankshaft Double walled heavy-duty tank with in tank fuel strainer [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Horizontal OHV Engine with Electric Start 390cc, GX Series, 1in. x 3 31/64in. Shaft, Model# GX390UT1QNE2

$879.98

The Honda 390cc GX Series OHV commercial-grade engine is designed for the most demanding commercial applications. It has set an industry standard for reliability and durability. Overhead Valve design offers cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. The GX is reliable, easy starting and quiet running. Meets EPA and CARB emission levels standards. This legendary engine has earned the reputation as the preferred engine for construction equipment. Common applications include pressure washers, compressors, go-karts, log splitters and chipper/shredders. Engine Displacement (cc): 390, Start Type: Electric with recoil backup, Application: Pressure washers, compressors, Engine Type: GX series OHV - commercial duty, Rated Power (HP): 11, Torque (ft./lbs.): 18.50 at 2,500 RPM, Shaft Output: Horizontal, Crankshaft: Q type, Shaft Diameter (in.): 1, Shaft Length (in.): 3 31/64, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 3/8 - 24, Shaft Rotation (From PTO Shaft Side): Counterclockwise, PTO Height (in.): 5 1/4, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.5 x 2.5, Compression Ratio: 8.0:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Standard (white), Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 6.4, Fuel Filter: Fuel tank filler neck strainer, Oil Capacity (qt.): 1.16, Lubrication System: Forced splash, Low Oil Alert: Yes, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, external vent, Throttle Control: Remote (wire), Choke Control: Manual, Max. RPM: 3,600, Charging System Amps: 10, Muffler Included: Silent, exhaust pipe protector, deflector, Auto Compression Release: Yes, Bolt Circle (in.): 5, 6 1/2, Mounting Base L x W (in.): 7 11/16 x 3 25/64 to 4 1/16, Dimensions L x W x H (in.): 15 7/8 x 17 11/16 x 17 3/8, EPA/CARB Approval (California Air Resource Board): Yes Honda 390cc GX ... [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Honda Vertical OHV Engine with Electric Start 340cc, GX Series, 1in. x 3 5/32in. Shaft, Model# GXV340UT2DE33

$879.98

The Honda 340cc GX OHV engine has been an industry standard for reliability and durability to thousands of people, on thousands of applications. Overhead Valve design offers, cooler, fuel-efficient operation and cast iron cylinder sleeve provides longer service life. Vertical-shaft engine provides easy-maintenance features and electronic ignition. Common applications include commercial turf equipment, lawn tractors and riding mowers. Engine Displacement (cc): 340, Start Type: Electric with recoil backup, Application: Commerical turf equipment, lawn tractors, riding mowers, Engine Type: GXV series OHV - commercial duty, Rated Power (HP): 8.9, Torque (ft./lbs.): 15.90 at 2,500 RPM, Shaft Output: Vertical, Shaft Diameter (in.): 1, Shaft Length (in.): 3 1/8, Shaft Keyway (in.): 1/4, Shaft End Tapped (Diameter (in.)/Threads per inch): 7/16 - 20, Shaft Rotation (From PTO Shaft Side): Counterclockwise, Cylinders (qty.): 1, Cylinder Bore: Cast iron, Bore x Stroke (in.): 3.2 x 2.5, Compression Ratio: 7.7:1, Cooling System: Air cooled, Air Cleaner Type: Dual element, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 2.2, Fuel Filter: Mesh fuel filter in the fuel tank, Oil Capacity (qt.): 1.2, Lubrication System: Pressure and splash, Low Oil Alert: No, Ignition System: Electronic, Governor System: Centrifugal mechanical, Carburetor: Float, Throttle Control: Remote (wire), Choke Control: Remote (wire), Max. RPM: 3,600, Charging System Amps: 3, Muffler Included: Yes, Bolt Circle (in.): 10, Dimensions L x W x H (in.): 17 x 15 x 15 7/8, EPA/CARB Approval (California Air Resource Board): Yes [Read more]

Store: Northern Tool and Equipment

Brand: Honda Engines

Engine Sprocket 15 Tooth

$10.98

Use on engines, jack shafts, etc. U.S.A. Application: Engine sprocket, Chain Size: #35, Bore Diameter (in.): 3/4, Teeth (qty.): 15 Uses #35 chain Hub on one side Set screw Bore: 3/4in. Hardened case for long life Black oxide for protection [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Oregon Replacement Recoil Starter For Honda GC Engines, Model# 31-066

$29.98

This complete recoil starter from Oregon replaces Honda Part#s 28400-ZMO-013ZA and 28400-ZL8-023ZA for GC160, GCV160 and GCV13 engines. [Read more]

Store: Northern Tool and Equipment

Brand: Oregon

IPT Pumps Trash Pump 670cc Honda GXV670 Engine, 6in. Ports, 1000 GPM, Model# 5581-IPT-96

$8,999.99

IPT Pumps industrial-duty 6in. trash pump handles jobs requiring high volume flow and solid/debris capabilities. Honda GX V-twin gasoline engine moves up to 1000 gallons per minute. Pump mounted on trailer. U.S.A. Flow (GPH): 60,000, Engine: Honda GXV670 V-Twin, Suction Port (in.): 6, Discharge Port (in.): 6, Max. Suction Lift (ft.): 20, Max. Total Head (ft.): 98, Self-Priming: Yes, Solid Handling (in.): 3, Pump Housing: Cast Aluminum, Check Valve: BUNA, Seals: Silicon Carbide/Viton Mechanical, Impellers: Stainless Steel, Volute: Cast Iron, Max. Fluid Temp. (deg.): 180, Start Type: Electric Start, Fuel Capacity (gal.): 12, Run Time: 6, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 93 x 52 x 49 3-year limited warranty on engine Self-priming to 20 feet Digital tachometer/hourmeter Cast iron seal plate, volute and manifold Buna O-rings and flapper/check valve Patented slide mechanism separates pump housing for easy cleanout and maintenance Mounted on DOT-approved trailer with 12in. tires Includes suction strainer and pipe nipple [Read more]

Store: Northern Tool and Equipment

Brand: IPT Pumps

Stanley Finish Mower Honda GXV 530 Engine, 54in.W Deck, Model# 54FS

$3,799.98

This heavy-duty mower is powered by a Honda V-twin engine paired with dual hydrostatic drives, perfect for landscapers and large lot owners. The drive system offers superior maneuverability and variable speed control. The quick-adjust floating deck lets you quickly alter the deck height without tools. Not for sale in California. Engine: Honda GXV 530, HP: 16, Engine Displacement (cc): 530, Gross Torque: 25.2 ft-lbs, Drive: Dual hydrostatic, Cutting Height (in.): 1 1/2 - 4 1/2, Cutting Styles: Finish cut, Cutting Speeds: Variable, Cutting Width (in.): 54, Max. Cutting Speed (MPH): 8, Bagger Volume (bushels): 3, Deck Material: Welded steel, Front Tire Size (in.): 9 x 3 1/2, Rear Tire Size (in.): 18 x 8, Dimensions L x W x H (in.): 80 x 64 x 40 Electric start, includes battery Optional mulch kit and ride-along sulky (Item# 365185) available [Read more]

Store: Northern Tool and Equipment

Brand: Stanley

IPT Diaphragm Pump 5100 GPH, 25ft. Max Lift, 3in. Ports, GX120 Engine, Model# 3D4XH

$1,599.98

This sludge or mud pump is more than capable of getting the water moving. Built for portability without sacrificing durability with sand-cast aluminum and a heavy-duty gearbox. Flow (GPH): 5,100, Engine: Honda GX120 OHV, Engine Displacement (cc): 120, Engine Speed (RPM): 3,600, Suction Port (in.): 3, Discharge Port (in.): 3, Max. Suction Lift (ft.): 25, Pump Housing: Sand-cast aluminum, Diaphragm: TPE, Check Valve: Neoprene, Max. Fluid Temp. (deg.): 180 F, Start Type: Recoil, Fuel Capacity (gal.): 0.66, Run Time: 2.3 hrs, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 26 x 26 1/2 x 23 3/16 Modular component design for easy maintenance [Read more]

Store: Northern Tool and Equipment

Brand: IPT Pumps

NorthStar High-Pressure Water Pump 2in. Ports, 8120 GPH, 94 PSI, Honda GX160 Engine

$549.98

Using a dependable Honda GX160 engine, this NorthStar high-pressure water pump is ideal for sprinkler systems, remote area firefighting and washing down equipment. Uses standard NPT threads for attachment flexibility. NorthStar uses long-lasting, high-end silicon carbide seals that are specially suited for heavy-duty applications. Fully welded frame with durable DuPont Black Wrinkle TGIC Polyester electrostatic finish holds up to jobsite abuse and protects engine and pump. Flow (GPH): 8,120, Max. PSI: 94, Engine: Honda GX160, Engine Displacement (cc): 160, Suction Port (in.): 2, Discharge Port (in.): 2, Max. Suction Lift (ft.): 26, Max. Total Head (ft.): 214, Pump Housing: Steel, Seals: Silicon carbide, Impellers: Brass, Volute: Cast iron Designed to push water long distances or to great heights Silicon carbide seals are 2 times harder, 15% tougher, and 50% stronger than common aluminum oxide seals All sheet metal parts are cut using a state of the art CO2 laser Uses standard NPT threads for attachment flexibility Utilizes a check valve to hold a prime while the pump is not running Replacement parts available from Northern or a Northern retail store [Read more]

Store: Northern Tool and Equipment

Brand: NorthStar

Tsurumi Diaphragm Pump 120cc Honda Engine, 3in. NPT, Model# TD4-300

$2,769.98

Continuous dry operation for seepage dewatering. Handles sand, mud and sludge. Heavy-duty Honda GX120HX gas engine with oil sensor. U.S.A. Flow (GPH): 5,100, Engine: Honda GX120HX, HP: 4, Engine Displacement (cc): 120, Engine Speed (RPM): 3,600, Suction Port (in.): 3, Discharge Port (in.): 3, Max. Total Head (ft.): 40, Solid Handling (in.): 2 3/8, Pump Housing: Aluminum, Diaphragm: TPE, Check Valve: TPE, Start Type: Recoil, Fuel Capacity (gal.): .66, Run Time: 3, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 33 1/2 x 31 1/2 x 31 Durable TPE diaphragm and check valves for extended wear Balanced wheel and handle assembly provide easy handling Maximum pump operation speed of 2800 RPM 5100 GPH (85 GPM) [Read more]

Store: Northern Tool and Equipment

Brand: Tsurumi Pump

NorthStar High-Pressure Water Pump 3in. Ports, 10, 550 GPM, 116 PSI, Honda GX270 Engine

$849.98

Using a dependable Honda GX270 engine, this NorthStar High-Pressure Water Pump is ideal for sprinkler systems, remote area firefighting and washing down equipment. NorthStar uses long-lasting, high-end silicon carbide seals that are specially suited for heavy-duty applications. Fully welded frame with durable DuPont Black Wrinkle TGIC Polyester electrostatic finish holds up to jobsite abuse. Flow (GPH): 10,550, Max. PSI: 116, Engine: Honda GX270, Engine Displacement (cc): 270, Suction Port (in.): 3, Discharge Port (in.): 3, Max. Suction Lift (ft.): 26, Max. Total Head (ft.): 263, Pump Housing: Steel, Seals: Silicon carbide, Impellers: Brass, Volute: Cast iron Designed to push water long distances or to great heights Silicon carbide seals are 2 times harder, 15% tougher, and 50% stronger than common aluminum oxide seals All sheet metal parts are cut using a state of the art CO2 laser Uses standard NPT threads for attachment flexibility Utilizes a check valve to hold a prime while the pump is not running Replacement parts available from Northern or a Northern retail store [Read more]

Store: Northern Tool and Equipment

Brand: NorthStar

Swisher Finishing Trailmower 44in. Cutting Width, 12.5 HP Engine with Electric Start, Model# T12544

$1,299.98

If you have a big mowing job, you need a Swisher Trailmower. Designed to dramatically reduce mowing time, Trailmowers attach to your ATV, lawn tractor or other utility vehicle and are the ultimate time-savers for large lawns and meadows. U.S.A. Item is on backorder until mid-April. Powered by a 12.5 HP Briggs & Stratton I/C engine with 12V electric start Twin blades provide finish cut quality 44in. cutting deck constructed of 11-gauge steel Convenient single-point height adjustment Universal articulating hitch Exclusive bumper/roller system protects against damage to trees and shrubs Antiscalp rollers Wide tires decrease rutting, increase stability [Read more]

Store: Northern Tool and Equipment

Brand: Swisher

Yard-Man 2-in-1 Push Mower 173cc Kohler OHV Engine, 21in.W Deck, Model# 11A-41K3001

$229.99

This Yard-Man push mower has a 2-in-1 deck that can mulch and bag your yard clippings. Makes raking leaves a thing of the past! U.S.A. Engine: Kohler OHV, Engine Displacement (cc): 173, Gross Torque: 7 ft-lbs, Drive: Push, Cutting Height (in.): 1 1/4 - 3 3/4, Cutting Styles: Mulch / rear bag, Cutting Width (in.): 21, Bagger Volume (bushels): 1.6, Deck Material: Steel, Front Tire Size (in.): 7, Rear Tire Size (in.): 8, Dimensions L x W x H (in.): 34 x 24 x 19 Kohler engine with Smart-Choke Nine-position height adjustment [Read more]

Store: Northern Tool and Equipment

Brand: Yardman

Hobart Maintenance Kit for Champion Elite Generator/Welder Use with Kohler Engine, Model# 770666

$49.99

This Hobart maintenance kit provides items needed to perform routine maintenance on your Champion Elite generator/welder (Item# 628571), including air filter, air filter pre-cleaner, oil filter, 2 spark plugs and fuel filter with clamps. Oil not included. [Read more]

Store: Northern Tool and Equipment

Brand: Hobart

Lumbermate Pro Portable Sawmill 23 HP Briggs & Stratton Engine, Model# MX34

$7,599.99

Make your workday easier with a LumberMate portable sawmill. With automated features like Quick-Cycle sawing, youll be more productive and get bigger jobs done faster. Engineered from the ground up for durability with double-plated steel rails, heavy-gauge tubular steel vertical mounts and a solid frame. U.S.A. Application: Portable Milling, HP: 23, Engine: Briggs & Stratton, Engine Type: Vanguard V-Twin OHV, Start Type: Electric, Handles up to (in.): 34in. dia. logs, 28in.W boards, Rails (in.): 2in.W x 8in.H, Rail Material: Twin double-plated debossed galvanized steel, Cross Bunks (in.): 41in.W at bottom x 11 13/16in.H x 29in.W at top, Cross Bunk Material: 1/4in. powder-coated plate steel, Dimensions L x W x H (in.): 192 x 79 x 60 Shipped knocked down, assembly required [Read more]

Store: Northern Tool and Equipment

Brand: Norwood Industries

Lumbermate Pro Portable Sawmill 16 HP Briggs & Stratton Engine, Model# MX34

$6,999.99

Make your workday easier with a LumberMate portable sawmill. With automated features like Quick-Cycle sawing, youll be more productive and get bigger jobs done faster. Engineered from the ground up for durability with double-plated steel rails, heavy-gauge tubular steel vertical mounts and a solid frame. U.S.A. Application: Portable Milling, HP: 16, Engine: Briggs & Stratton, Engine Type: V-Twin OHV, Start Type: Electric, Handles up to (in.): 34in. dia. logs, 28in.W boards, Rails (in.): 2in.W x 8in.H, Rail Material: Twin double-plated debossed galvanized steel, Cross Bunks (in.): 41in.W at bottom x 11 13/16in.H x 29in.W at top, Cross Bunk Material: 1/4in. powder-coated plate steel, Dimensions L x W x H (in.): 192 x 79 x 60 Shipped knocked down, assembly required [Read more]

Store: Northern Tool and Equipment

Brand: Norwood Industries

Tsurumi Diaphragm Pump 120cc Honda Engine, 2in. NPT, Model# TD4-200

$2,769.98

Continuous dry operation for seepage dewatering. Handles sand, mud and sludge. Heavy-duty Honda GX120HX gas engine with oil sensor. U.S.A. Flow (GPH): 3,000, Engine: Honda GX120HX, HP: 4, Engine Displacement (cc): 120, Engine Speed (RPM): 3,600, Suction Port (in.): 2, Discharge Port (in.): 2, Max. Total Head (ft.): 40, Solid Handling (in.): 1 3/4, Pump Housing: Aluminum, Diaphragm: TPE, Check Valve: TPE, Start Type: Recoil, Fuel Capacity (gal.): .66, Run Time: 3 Hours, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 33 1/2 x 31 1/2 x 31 Durable TPE diaphragm and check valves for extended wear Balanced wheel and handle assembly provide easy handling Maximum pump operation speed of 2800 RPM 3000 GPH (50 GPM) [Read more]

Store: Northern Tool and Equipment

Brand: Tsurumi Pump

LumberLite Mid-Size Sawmill Honda GX270 Engine, Model# ML26

$4,199.99

Get ready for any project with the LumberLite mid-size portable sawmill. Its a pleasure to operate, with an all-steel bed, a rigid 4-post carriage frame, and time-saving auto-locking sawhead. This is a reliable, no-nonsense sawmill that will let you take care of any project. Application: Portable Milling, Engine: Honda GX270, Engine Type: OHV, Start Type: Recoil, Handles up to (in.): 25 1/2in. dia. logs, 17in.W boards, Rails (in.): 1 1/2in.W x 5 1/2in.H, Rail Material: 10-ga. galvanized steel, Cross Bunks (in.): 28 1/4in. at bottom x 5 13/16in.H x 23 1/4in.W at top, Cross Bunk Material: 3/16in. powder-coated plate steel, Dimensions L x W x H (in.): 192 x 71 x 56 Shipped knocked down, assembly required [Read more]

Store: Northern Tool and Equipment

Brand: Norwood Industries

LumberLite Mid-Size Sawmill Honda GX390 Engine, Model# ML26

$4,399.99

Get ready for any project with the LumberLite mid-size portable sawmill. Its a pleasure to operate, with an all-steel bed, a rigid 4-post carriage frame, and time-saving auto-locking sawhead. This is a reliable, no-nonsense sawmill that will let you take care of any project. Item is on backorder until September 17th. Application: Portable Milling, Engine: Honda GX390, Engine Type: OHV, Start Type: Recoil, Handles up to (in.): 25 1/2in. dia. logs, 17in.W boards, Rails (in.): 1 1/2in.W x 5 1/2in.H, Rail Material: 10-ga. galvanized steel, Cross Bunks (in.): 28 1/4in. at bottom x 5 13/16in.H x 23 1/4in.W at top, Cross Bunk Material: 3/16in. powder-coated plate steel, Dimensions L x W x H (in.): 192 x 71 x 56 Shipped knocked down, assembly required [Read more]

Store: Northern Tool and Equipment

Brand: Norwood Industries

Generac Portable Generator 5000 Surge Watts, 4000 Surge Watts, 220cc Generac OHVI Engine, Model# XG4000

$999.98

This Generac Portable Generator features rally-style wheels to allow you to bring the power anywhere you need it. U.S.A. Surge Watts: 5,000, Rated Watts: 4,000, Start Type: Recoil, Engine Displacement (cc): 220, Engine: Generac OHVI, Run Time: 13 hrs. at 1/2 load, Receptacles (qty.): 5, Fuel Type: Gasoline, Fuel Capacity (gal.): 4.5, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 27 1/2 x 22 x 23 1/2 Five circuit breaker-protected receptacles: four 5-20R CGFI and one 120V/240V L14-30R locking plug Includes rally-style wheels, handles, maintenance kit and first oil supply [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Portable Generator 3750 Surge Watts, 3250 Rated Watts, 206cc Generac OHV Engine, Model# GP3250

$549.98

Choose this Generac Portable Generator for your campground, construction site or any other place where reliable power is appreciated. U.S.A. Surge Watts: 3,750, Rated Watts: 3,250, Start Type: Recoil, Engine Displacement (cc): 206, Engine: Generac OHV, Run Time: 12 1/2 hrs. at 1/2 load, Receptacles (qty.): 4, Fuel Type: Gasoline, Fuel Capacity (gal.): 4, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 25 x 21 x 19 1/2 Four 5-20R 120V circuit breaker-protected receptacles Low-tone muffler Includes 7in. solid wheels, handle and first oil supply [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Digital Inverter 850 Surge Watts, 800 Rated Watts, 38cc OHV Engine, Model# IX800

$399.98

This Compact Inverter from Generac is a great choice for those times when you need a little extra power to get the job done in a package that is as safe and reliable as the larger models. Please allow between 21 to 30 days for delivery. Surge Watts: 850, Rated Watts: 800, Start Type: Recoil, Engine Displacement (cc): 38, Engine: OHV 4 stroke, Run Time: 3 1/2 hrs. @ 1/2 load, Receptacles (qty.): 2, Fuel Type: Gasoline, Fuel Capacity (gal.): 1/2, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 18 x 10 x 15 Two 5-20R 120V circuit breaker-protected receptacles [Read more]

Store: Northern Tool and Equipment

Brand: Generac

NorthStar Pest Control Skid Sprayer 55-Gallon Tank, Honda GX160 Engine

$1,699.98

Skid-mount sprayer is designed for applying pesticides and other chemical sprays. Tough Comet direct drive pump is powered by trusty 160cc Honda GX160 OHV engine to deliver up to 5 gallons per minute. 150-ft. hose with gun lets user deliver the chemicals for the most effective pest control, even in hard-to-reach areas. NorthStars tank features extra-thick walls wont bulge or sag. It stands up to chemicals because thanks to a special polymer known for its superior chemical resistance. Tank is UV-stabilized to prevent fading and other sun damage. Includes a Coxreel manual rewind hose reel. U.S.A. Engine: Honda GX OHV, Pump: Comet MC25 diaphragm direct drive, Gear Ratio: 1:5 1/2, Spray Gun Type: #31 gunjet, Spray Pattern: Straight, fan, Tank Size (gal.): 55, Flow (GPM): 5, Pressure (PSI): 350, Hose (in. x ft.): 3/8 x 150, Agitation: Yes, Dimensions L x W x H (in.): 47 x 40 x 31 1/2 Wettable pump parts resistant to common chemicals Oil included in pump and gear box PVC hose on manual rewind Coxreel hose reel 8in. lance extension Rugged steel 2.5in. tube frame Replacement parts available from Northern or a Northern retail store [Read more]

Store: Northern Tool and Equipment

Brand: NorthStar

Generac Inverter 2200 Surge Watts, 2000 Rated Watts, 126cc OHV Engine, Model# IX2000

$699.98

This Compact Inverter from Generac is a great choice for those times when you need a little extra power to get the job done in a package that is as safe and reliable as the larger models. Please allow up to 3 weeks for delivery. Surge Watts: 2,200, Rated Watts: 2,000, Start Type: Recoil, Engine Displacement (cc): 126, Engine: OHV 4 stroke, Run Time: 4.7 hrs. @ 1/2 load, Receptacles (qty.): 3, Fuel Type: Gasoline, Fuel Capacity (gal.): 1, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 22 x 12 x 18 Three receptacles: two 5-20R and one 12V DC [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Portable Generator 8125 Surge Watts, 6500 Rated Watts, 410cc Generac OHVI Engine, Model# XG6500

$1,199.98

This portable generator from Generac is a safe and reliable source of power for campgrounds, construction sites or emergencies. U.S.A. Surge Watts: 8,125, Rated Watts: 6,500, Start Type: Recoil, Engine Displacement (cc): 410, Engine: Generac OHVI, Run Time: 13 hrs. at 1/2 load, Receptacles (qty.): 5, Fuel Type: Gasoline, Fuel Capacity (gal.): 9, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 31 1/2 x 25 x 27 Five circuit breaker-protected receptacles: four 5-20R CGFI and one 120V/240V L14-30R locking plug Includes wheel kit, handles, maintenance kit and first oil supply [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Portable Generator 8750 Surge Watts, 7000 Rated Watts, 410cc Generac OHVI Engine, Model# XG7000

$1,249.98

This Generac Portable Generator doesnt skimp on power for portability. Great for work sites were you need lots of power that you can count on. Keeps things running during a emergency too. U.S.A. Surge Watts: 8,750, Rated Watts: 7,000, Start Type: Recoil, Engine Displacement (cc): 410, Engine: Generac OHVI, Run Time: 12 hrs. at 1/2 load, Receptacles (qty.): 5, Fuel Type: Gasoline, Fuel Capacity (gal.): 9, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 32 1/2 x 25 x 27 Five circuit breaker-protected receptacles: four 5-20R CGFI and one 120V/240V L14-30R locking plug Includes wheel kit, handles, maintenance kit and first oil supply [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Portable Generator 8750 Surge Watts, 7000 Rated Watts, 410cc Generac OHVI Engine with Electric Start, Model# XG7000E

$1,449.98

This Generac Portable Generator doesnt skimp on power for portability. Great for work sites were you need lots of power that you can count on. Keeps things running during a emergency too. U.S.A. Surge Watts: 8,750, Rated Watts: 7,000, Start Type: Electric, Engine Displacement (cc): 410, Engine: Generac OHVI, Run Time: 12 hrs. at 1/2 load, Receptacles (qty.): 5, Fuel Type: Gasoline, Fuel Capacity (gal.): 9, Low Oil Shutdown: Yes, Battery Required: Yes, Battery Included: Yes, Dimensions L x W x H (in.): 32 1/2 x 25 x 27 Five circuit breaker-protected receptacles: four 5-20R CGFI and one 120V/240V L14-30R locking plug Includes wheel kit, handles, maintenance kit and first oil supply [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Portable Generator 10, 000 Surge Watts, 8000 Rated Watts, 410cc Generac OHVI Engine, Model# XG8000

$1,499.98

This Generac Portable Generator doesnt skimp on power for portability. Great for work sites were you need lots of power that you can count on. Keeps things running during a emergency too. U.S.A. Surge Watts: 10,000, Rated Watts: 8,000, Start Type: Recoil, Engine Displacement (cc): 410, Engine: Generac OHVI, Run Time: 10 hrs. at 1/2 load, Receptacles (qty.): 5, Fuel Type: Gasoline, Fuel Capacity (gal.): 9, Low Oil Shutdown: Yes, Battery Required: No, Battery Included: No, Dimensions L x W x H (in.): 34 1/2 x 25 x 27 Five circuit breaker-protected receptacles: four 5-20R CGFI and one 120V/240V L14-30R locking plug Includes wheel kit, handles, maintenance kit and first oil supply [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Portable Generator 8000 Surge Watts, 6500 Rated Watts, 410cc Generac OHVI Engine, Model# GP6500

$1,049.98

This Generac Portable Generator doesnt skimp on power for portability. Great for work sites were you need lots of power that you can count on. Keeps things running during a emergency too. U.S.A. Surge Watts: 8,000, Rated Watts: 6,500, Start Type: Recoil, Engine Displacement (cc): 389, Engine: Generac OHV, Run Time: 10 hrs. at 1/2 load, Receptacles (qty.): 5, Fuel Type: Gasoline, Fuel Capacity (gal.): 6.6, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 33 1/2 x 26 1/2 x 27 Five circuit breaker-protected receptacles: four 5-20R CGFI and one 120V/240V L14-30R locking plug Includes 9 1/2in. wheel kit, handles and first oil supply [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Portable Generator 12, 000 Surge Watts, 8000 Rated Watts, 410cc Generac OHVI Engine, Model# XP8000E

$1,849.98

This Generac portable generator doesnt skimp on power for portability. Great for work sites were you need lots of power that you can count on. Keeps things running during a emergency too. U.S.A. Surge Watts: 12,000, Rated Watts: 8,000, Start Type: Electric, Engine Displacement (cc): 410, Engine: Generac OHVI, Run Time: 10 1/2 hrs. @ 1/2 load, Receptacles (qty.): 5, Fuel Type: Gasoline, Fuel Capacity (gal.): 8, Low Oil Shutdown: Yes, Battery Required: Yes, Battery Included: Yes, Dimensions L x W x H (in.): 35 1/2 x 26 x 29 1/2 Five circuit breaker-protected receptacles: four 5-20R CGFI and one 120V/240V L14-30R locking plug Includes wheel kit, handles, maintenance kit, 20ft.L 30 Amp cord and first oil supply [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Generac Portable Generator 5000 Surge Watts, 4000 Rated Watts, 220cc Generac OHVI Engine, Model# XP4000

$1,049.98

This Generac portable generator doesnt skimp on power for portability. Great for work sites were you need lots of power that you can count on. Keeps things running during a emergency too. U.S.A. Surge Watts: 5,000, Rated Watts: 4,000, Start Type: Recoil, Engine Displacement (cc): 220, Engine: Generac OHVI, Run Time: 12 hrs. at 1/2 load, Receptacles (qty.): 5, Fuel Type: Gasoline, Fuel Capacity (gal.): 8, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 30 x 25 1/4 x 26 1/4 Five circuit breaker-protected receptacles: four 5-20R CGFI and one 120V/240V L14-30R locking plug Includes wheel kit, handles, maintenance kit 20ft.L 20 Amp cord and first oil supply [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Jams Turbo 3000D Installation Kit Fits Adapter Kit for Caterpillar Engines, 1999 or Earlier (Use with Item# 710970)

$9.98

This Jams Turbo installation kit contains the specific parts needed to complete installation of a Jams Turbo 3000D Fuel Saver (Item# 710981). It is designed for use with the Adapter Kit for Caterpillar Engines, 1999 or earlier (use with Item# 710970). Works With: Jams Turbo 3000D fuel saver, Compatible With: Caterpillar Engines, 1999 or earlier, Compatible With Item Number (s): 710981, 710970 [Read more]

Store: Northern Tool and Equipment

Brand: Turbo3000D

Jams Turbo 3000D Installation Kit Fits Detroit Series 60 Engines, 2002 or Earlier

$79.98

This Jams Turbo installation kit contains the specific parts needed to complete installation of a Jams Turbo 3000D Fuel Saver (Item# 710981). It is designed for use with Detroit Series 60 Engines, 2002 or earlier. Works With: Jams Turbo 3000D fuel saver, Compatible With: Detroit Series 60 Engines, 2002 or earlier, Compatible With Item Number (s): 710981 [Read more]

Store: Northern Tool and Equipment

Brand: Turbo3000D

Jams Turbo 3000D Installation Kit Fits Detroit Series 60 Engines, 2003-2007

$69.98

This Jams Turbo installation kit contains the specific parts needed to complete installation of a Jams Turbo 3000D Fuel Saver (Item# 710981). It is designed for use with Detroit Series 60 Engines, 2003-2007. Works With: Jams Turbo 3000D fuel saver, Compatible With: Detroit Series 60 Engines, 2003-2007, Compatible With Item Number (s): 710981 [Read more]

Store: Northern Tool and Equipment

Brand: Turbo3000D

Jams Turbo 3000D Installation Kit Fits Detroit Series 60 Engines, 2008

$69.98

This Jams Turbo installation kit contains the specific parts needed to complete installation of a Jams Turbo 3000D Fuel Saver (Item# 710981). It is designed for use with Detroit Series 60 Engines, 2008. Works With: Jams Turbo 3000D fuel saver, Compatible With: Detroit Series 60 Engines, 2008, Compatible With Item Number (s): 710981 [Read more]

Store: Northern Tool and Equipment

Brand: Turbo3000D

Jams Turbo 3000D Diesel Fuel Saver for Cummins ISX Engines

$239.99

The Jams Turbo 3000D works with your trucks fuel injection system to provide efficient and equal delivery of fuel, delivering better fuel economy, increased horsepower and a smoother running engine overall. It delivers fuel rail pressure equalization through change in fuel travel action. This model is designed specifically for Cummins ISX engines and only is not for use with gasoline engines. If you have a gasoline engine, choose Item# 710981. U.S.A. This item requires the purchase of a corresponding installation kit specific to your truck. When you place your order, check the list of Items We Recommend for the installation kit you need, or call 1-800-221-0516 for further assistance. Works With: Fuel injection systems, Compatible With: Cummins engines Stainless steel, brass and aluminum construction with no moving parts Maintenance-free Use with specific installation kit for your truck (sold separately) [Read more]

Store: Northern Tool and Equipment

Brand: Turbo3000D

Kohler 6.5 HP Horizontal Engine - 196cc, 3/4in. x 2 7/16in. Shaft, Model# PA-SH265-0011

$229.99

This Kohler horizontal engine is an excellent choice for log splitters, pressure washers and more. Engine Displacement (cc): 196, Start Type: Recoil, Application: Tillers, log splitters, pressure washers, compressors, cement mixers, tampers, construction equipment and more, Engine Type: OHV, Rated Power (HP): 6.5, Torque (ft./lbs.): 9.1, Displacement (cu. in.): 12.7, Shaft Output: CCW, Crankshaft: Hardened, Shaft Diameter (in.): 3/4, Shaft Length (in.): 2.42, Shaft Keyway (in.): 3/16, Shaft End Tapped (Diameter (in.)/Threads per inch): 5/16 / 24, Shaft Rotation (From PTO Shaft Side): CCW, PTO Height (in.): 4.173, Bearing Type: Dual Ball bearings, Cylinders (qty.): 1, Cylinder Bore: 2.8, Bore x Stroke (in.): 2.8 x 2.1, Compression Ratio: 8.5: 1, Cooling System: Air, Air Cleaner Type: Cyclonic, Fuel Tank: Yes, Fuel Type: Gasoline, Fuel Tank Capacity (qt.): 4.3, Fuel Filter: Yes, Oil Capacity (qt.): 0.63, Lubrication System: Splash, Low Oil Shutdown: Yes, Ignition System: Electronic, Governor System: Mechanical, Carburetor: Float with bowl drain, Throttle Control: Engine-mounted, Choke System: Engine-mounted, Max. RPM: 3,600, Muffler Included: Yes, Auto Compression Release: Yes, Bolt Circle (in.): 3.625, Mounting Base L x W (in.): 6.378 x 3.149, Mounting Bolt Pattern L x W (in.): 6.378 x 3.149, Dimensions L x W x H (in.): 12.7 x 14.7 x 14, EPA/CARB Approval (California Air Resource Board): Yes Large muffler for quiet operation Large metal fuel tank with metal cap Low oil alert Dual air drains [Read more]

Store: Northern Tool and Equipment

Brand: Kohler

Generac Portable Generator - 10,000 Surge Watts, 8000 Rated Watts, 410cc Generac OHVI Engine with Electric Start, Model# 5747

$1,599.98

Take this powerful Generac Portable Generator to your work site, camping ground or construction zone for a power source that you can rely on. U.S.A. Surge Watts: 10,000, Rated Watts: 8,000, Start Type: Electric with recoil backup, Engine Displacement (cc): 410, Engine: Generac OHVI, Run Time: 10 hrs. @ 1/2 load, Receptacles (qty.): 5, Fuel Type: Gasoline, Fuel Capacity (gal.): 9, Low Oil Shutdown: Yes, Dimensions L x W x H (in.): 35 1/2 x 25 x 27 Five circuit breaker-protected receptacles: four 5-20R CGFI and one 120V/240V L14-30R locking plug Includes battery, wheel kit, handles, first oil supply and maintenance kit [Read more]

Store: Northern Tool and Equipment

Brand: Generac

Husqvarna HU700L 3-in-1 Lawn Mower - 160cc Honda GCV160 Engine, 22in. Deck, Model# HU700L

$349.98

The Husqvarna HU700L 3-in-1 Lawn Mower has side discharge, rear bag and mulching functions to take care of all kinds of jobs. Rear wheel drive for better traction in high grass. U.S.A. Engine: Honda GCV160, Engine Displacement (cc): 160, Drive: Rear, Cutting Height (in.): 1 1/2 - 3 1/2, Cutting Styles: 3 in 1, Cutting Speeds: Variable, Cutting Width (in.): 22, Bagger Volume (bushels): 2, Deck Material: Steel, Front Tire Size (in.): 8, Rear Tire Size (in.): 8 Ergonomic handle folds for transport or storage Deck washout port [Read more]

Store: Northern Tool and Equipment

Brand: Husqvarna

Husqvarna Push Mower - 160cc Honda GCV Engine, 21in. Steel Deck, Model# 7021P

$279.98

Sure you hate to mow the lawn. This lawn mower wont change that. But it will give you the best cut lawn on the block. Why not make the best of things? U.S.A. Engine: Honda GCV160, Engine Displacement (cc): 160, Gross Torque: 6.9, Drive: Push, Cutting Height (in.): 1 1/2 - 3 1/2, Cutting Width (in.): 21, Bagger Volume (bushels): 2, Deck Material: Steel, Front Tire Size (in.): 8, Rear Tire Size (in.): 12, Dimensions L x W x H (in.): 40 x 25 1/4 x 17 3/4 Side discharge, 2-bushel rear bag and mulching Double ball bearings for a smooth roll Folding handle for transport and storage 2 blades with electric PTO control [Read more]

Store: Northern Tool and Equipment

Brand: Husqvarna

StormForce Electric Start Snow Blower Engine - 208cc, OHV, 9.5 Ft-Lbs. Torque

$334.98

This StormForce electric start 208cc OHV engine, model PW1HK650178E-ABGOQUVE1S, is an ideal replacement for your tired old 6.5 HP snow blower engine. Displacement (cc): 208, Application: Snowblower, Torque (ft./lbs.): 9.5, Engine Type: OHV, Start Type: 120VAC electric start with recoil backup, Shaft Dimensions Diameter x L (in.): 3/4 x 2 27/64, Mounting Base L x W (in.): 6.38 x 3.05, Bolt Circle (in.): 3 5/8 Industrial cast iron sleeve Dual ball bearing; forged crankshaft Oversized starting grip and fuel cap Patented design of controls for easy use with gloves Safety key switch; primer bulb High oil fill Extended oil drain pipe Replacement engine for snow blowers [Read more]

Store: Northern Tool and Equipment

Brand: Stormforce

Swisher Lawn Vac - 205cc Briggs & Stratton Engine, 51 Cubic Ft, Model# LV87551

$1,249.98

This Swisher Lawn Vac can clear a lawn of leaves without spending hours raking. Swishers Lawn Vac is perfect for a variety of chores around your property. Pull it behind your lawn tractor to pick up leaves and debris. The Lawn Vac is designed to save you from back-breaking chores, and may even let you have some fun while you work. Item is on backorder until mid-March. Mower Type: Lawn vacuum, Application: Pull-behind, Air Velocity (MPH): 180, Air Volume (CFM): 6,000, Engine Type: Briggs & Stratton 900-series OHV, Hose Length (in.): 84, Hose Length (ft.): 7, Vacuum Hose Diameter (in.): 6, Discharge Chute Material: HDPE 550-80, Housing Material: Cloth bag, Overall Dimensions L x W x H (in.): 99 x 43 1/2 x 64, Mounting Type: Hitch pin Briggs & Stratton 205cc 900-series engine 9 ft-lbs. Gross Torque 51 cu. ft. capacity Compatible with mowers that have a 60in. or smaller deck with right-side discharge and 1000-lb. towing capacity Converts to durable polyethylene trailer with easy-to-use dump feature [Read more]

Store: Northern Tool and Equipment

Brand: Swisher

STANLEY Heavy-Duty Brush Mower - 20 HP Kawasaki FR-600V Engine, 36in. Steel Deck, Model# 36BSK

$3,099.98

An electric start 20 HP Kawasaki FR-600V engine gives this STANLEY Brush Mower excellent power and performance. Cuts tall grasses and thickets into a 4in. finish cut appearance in a single pass. Dual break-away blades act like battering axes to cut stumps up to 4in. in dia. and 4in. x 20in. trees. Ideal for landscapers, large lot owners, hunting clubs, grounds keepers and parks departments. U.S.A. Engine: Kawasaki FR600V, HP: 20, Engine Displacement (cc): 603, Gross Torque: 37.5 ft-lbs, Drive: Hydrostatic, Cutting Height (in.): 4, Cutting Styles: Brush, Cutting Speeds: Variable, Cutting Width (in.): 36, Max. Cutting Speed (MPH): 8, Deck Material: 6-ga. steel, Rear Tire Size (in.): 16, Dimensions L x W x H (in.): 82 x 39 x 43 Break-away blades on a 50-lb. flywheel Front discharge for added safety Optional finish kit available [Read more]

Store: Northern Tool and Equipment

Brand: Stanley

NorthStar- Generator Head - 3500 Surge Watts, 3000 Rated Watts, J609A Engine Adaption

$199.99

This NorthStar 3000 Watt generator head is designed as a replacement for portable electric generators that are powered by a 6 HP gas engine and require a J609A engine adaption. Brushless generator heads are proven to be superior in efficiency, performance and lifespan compared to brush-style generator heads. Engine Required: 5.5-6 HP (3600 RPM), Shaft Diameter (in.): 25/32, Rated Watts: 3,000, Surge Watts: 3,500, Dimensions L x W x H (in.): 11 x 7 1/8 x 7 3/4 Brushless design with high quality copper windings 25 Amps @ 120V; 12.5 Amps @ 240V SAE J609A engine adaption 3 5/8in. bolt hole circle with 4 mounting holes 45 off vertical 1.625in. center pilot 25/32in. engine shaft diameter x 2 53/64in. shaft length with taper of 2.25in./ft. Includes generic wiring harness Will fit Honda GC160VHA, GC160VXA, GX160VX and GX160VXW engines Fits engine Item#s 605941, 605921 Fits generator Item# 165912 May fit many U.S. manufactured generators with Briggs & Stratton, Kohler, Tecumseh or Honda engines Replacement parts available from Northern or a Northern retail store [Read more]

Store: Northern Tool and Equipment

Brand: NorthStar

Briggs & Stratton Home Standby Generator with Vanguard Engine - 15 kW, Model# 40303

$3,999.98

Whether you are home or away, the Briggs & Stratton Home Standby Generator will provide fully automatic operation and a permanent connection to natural gas or propane during a power outage. Design is half the size, sound, fuel consumption and price of most competitive systems. U.S.A. Engine: Vanguard, Engine Displacement (cc): 895, Rated Watts LP (kW): 15, Rated Watts NG (kW): 14, Surge Watts LP (kW): 18.5, Surge Watts NG (kW): 17, Volts: 120/240, Amps: 125/62.5 LP, 116.7/58.3 NG, Fuel Type: Propane or Natural gas Air conditioning control module (ACCM) can manage up to two 5-ton air conditioner units and homes entire panel (load dependent) when partnered with Briggs & Stratton transfer switch Item#s 213286 or 213287 Hour meter Includes hardwired remote system status indicator Fuel consumption @ 1/2 load: 1.56 gallons/hr. (LP); 126,000 BTU/hr (NG) Synthetic oil in the crankcase Standby generators require installation involving permanent outdoor placement, electrical wiring and fuel source connections. We recommend the use of a trained professional for final connections of gas and electric Generator sales are final [Read more]

Store: Northern Tool and Equipment

Brand: Briggs & Stratton