Farm Star Equipment Rotary Tiller 3-Point, Category 0, 42in. Length

$1,699.98

Tillers turn hard ground into perfect seed bed quickly and easily. Rugged and built to last. All models feature a rear deflector to keep the soil beneath the tiller and curved or L-shaped blades for thorough pulverization. Oil-bathed over-sized chain drive, shear-bolt PTO driveline, skid depth adjustment and adjustable lower hitch points. Tillers have working depth of 5in-6in. maximum. Hitch Type: 3-Point, Category Type: 1 Pin / 0 Spacing, Working Width (in.): 42, Working Depth (in.): 5 - 6, Max. HP: 25, Required HP: 15 - 20, Offset (in.): 11 1/2, Blades (qty.): 20, Blade Type: Curved [Read more]

Store: Northern Tool and Equipment

Brand: Farm Star Equipment

King Kutter II Gear Driven Rotary Tiller 4ft. Tiller Width, Model# TG-48

$1,599.98

King Kutter II gear-driven rotary tillers are designed to perform with its heavy-duty gear drive and square tube frame. With 6 tines per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping or other jobs. This Category 1 tiller includes a PTO shaft with heavy-duty slip clutch. Available in 4ft, 5ft, and 6 ft. models. The 4 ft. model is offset to eliminate tire tracks. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 48, Working Depth (in.): 8 Max, Required HP: 20 - 35, Flanges (qty.): 6, Blades (qty.): 36, Blade Type: L Tines Adjustable skids control cutting depth while rear shield controls soil mix Heavy-duty cast iron gearbox Heavy-duty gear drive for dependable performance Vented side gear box operates in oil bath 540 RPM PTO drive Shielded PTO shaft with slip clutch driveline protection Heavy-duty square tube reinforced frame with extra gussets Perfect for vegetable or hobby farmers, landscape contractors, municipal maintenance, nurseries and much more Model# TG-48 [Read more]

Store: Northern Tool and Equipment

Brand: King Kutter

King Kutter II Gear Driven Rotary Tiller 6ft. Tiller Width, Model# TG-72-Y

$2,099.98

King Kutter II gear-driven rotary tillers are designed to perform with its heavy-duty gear drive and square tube frame. With 6 tines per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping or other jobs. This Category 1 tiller includes a PTO shaft with heavy-duty slip clutch. Available in 4ft, 5ft, and 6 ft. models. The 4 ft. model is offset to eliminate tire tracks. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 72, Working Depth (in.): 8, Required HP: 35 - 50, Flanges (qty.): 9, Blades (qty.): 54, Blade Type: L Tines Adjustable skids control cutting depth while rear shield controls soil mix Heavy-duty cast iron gearbox Heavy-duty gear drive for dependable performance Vented side gear box operates in oil bath 540 RPM PTO drive Shielded PTO shaft with slip clutch driveline protection Heavy-duty square tube reinforced frame with extra gussets Perfect for vegetable or hobby farmers, landscape contractors, municipal maintenance, nurseries and much more Model# TG-72-Y [Read more]

Store: Northern Tool and Equipment

Brand: King Kutter

King Kutter II Gear Driven Rotary Tiller 5ft. Tiller Width, Model# TG-60-Y

$1,749.98

King Kutter II gear-driven rotary tillers are designed to perform with its heavy-duty gear drive and square tube frame. With 6 tines per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping or other jobs. This Category 1 tiller includes a PTO shaft with heavy-duty slip clutch. Available in 4ft, 5ft, and 6 ft. models. The 4 ft. model is offset to eliminate tire tracks. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 60, Working Depth (in.): 8, Required HP: 25 - 40, Flanges (qty.): 7, Blades (qty.): 42, Blade Type: L Shaped Adjustable skids control cutting depth while rear shield controls soil mix Heavy-duty cast iron gearbox Heavy-duty gear drive for dependable performance Vented side gear box operates in oil bath 540 RPM PTO drive Shielded PTO shaft with slip clutch driveline protection Heavy-duty square tube reinforced frame with extra gussets Perfect for vegetable or hobby farmers, landscape contractors, municipal maintenance, nurseries and much more Model# TG-60-Y [Read more]

Store: Northern Tool and Equipment

Brand: King Kutter

Grower Equipment Tiller Rake 4ft. Length

$2,899.98

Durable tines and reversible scarifying shovels quickly turn hard, compacted ground into a perfect seedbed. Can be changed from a scarifier to a grader, spreader or finishing rake simply by adjusting the top link. Heavy-duty double springs. Great for landscape construction, fire lanes, nursery weed control, soil preparation for sod, and grooming horse arenas, baseball infields and beaches. Truck ship. U.S.A. Factory shipped. Hitch Type: 3-Point, Working Width (in.): 48 [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Agri-Fab Universal Tow-Behind Tiller 36in. Width, Model# 45-0308

$1,299.98

Youve probably never seen anything like this before! Tiller can be towed behind ATVs as well as lawn tractors using a universal pin-type hitch with at least 12 HP. The Agri-Fab tow behind tiller features a powerful 5 HP engine to power through any soil condition. With its large 36in. tilling width and conveniently located controls, you can quickly prepare the perfect planting bed with minimal effort. U.S.A. Application: Tiller, Working Width (in.): 36, Engine: Briggs & Stratton, HP: 5, Overall Width (in.): 38 1/4, Tines (qty.): 6, Tine Type: 7 gauge steel, Height Range (in.): 1 1/2 - 5 1/2, Tire Size (in.): 15 x 6, Depth (in.): 5 1/2 Tiller Width: 36in. Tines:11in. dia Forward rotation tiller and spring loaded hitch reduces stress No sleeve or three point hitch necessary [Read more]

Store: Northern Tool and Equipment

Brand: Agri-Fab

Farm Star Equipment Rotary Tiller 3-Point, Category 0, 50in. Length

$1,999.98

Tillers turn hard ground into perfect seed bed quickly and easily. Rugged and built to last. All models feature a rear deflector to keep the soil beneath the tiller and curved or L-shaped blades for thorough pulverization. Oil-bathed over-sized chain drive, shear-bolt PTO driveline, skid depth adjustment and adjustable lower hitch points. Tillers have working depth of 5in-6in. maximum. Hitch Type: 3-Point, Category Type: 0, Working Width (in.): 50, Working Depth (in.): 5, Max. HP: 25, Required HP: 18 - 22, Offset (in.): 11 1/2, Blades (qty.): 24, Blade Type: Curved [Read more]

Store: Northern Tool and Equipment

Brand: Farm Star Equipment

Troy-Bilt Bronco Tiller 208cc OHV Engine, Model# 21C064MC066

$569.98

This Troy-Bilt Bronco tiller features a powerful 208cc OHV engine. U.S.A. Application: Tiller, Working Width (in.): 14, Engine: OHV, Displacement (cc): 208, Overall Width (in.): 20, Tine Type: Bolo, Tire Size (in.): 10, Depth (in.): 6 208cc Troy-Bilt OHV engine Bolo styled counter rotating tines 10in. tine dia.; 14in. tine width; 15in. tine shield 2.75in. x 10in. wheel size Loop and bail handle [Read more]

Store: Northern Tool and Equipment

Brand: Troy-Bilt

Troy-Bilt Pro-Line 160cc FRT Tiller, Model# 21A-6658766

$1,249.98

The Troy-Bilt Pro-Line tiller uses Honda power and forward-rotating tines to provide premium soil preparation for gardens up to 1500 square feet. U.S.A. Application: Tiller, Working Width (in.): 16, Engine: Honda, Engine Type: OHV, Overall Width (in.): 23, Tine Type: Bolo, Depth (in.): 8 Forward-rotating tines Forward-rotating tines for premium garden soil preparation Designed for gardens up to 1500 sq. ft. Just One Hand operation for ease of use One forward speed, power reverse. Adjustable tilling depth up to 8in. Plow-type handle, front protective bumper, 13in. ag tires [Read more]

Store: Northern Tool and Equipment

Brand: Troy-Bilt

Troy-Bilt Horse Tiller 305cc, Model# 21A-682J766

$1,899.98

The Troy-Bilt Horse tiller is a true workhorse. This versatile tiller is designed for gardens larger than 1500 square feet. U.S.A. Application: Tiller, Working Width (in.): 20, Engine: Briggs & Stratton, Engine Type: OHV, HP: 8, Displacement (cc): 305, Torque (ft./lbs.): 13.5, Tines (qty.): 20, Tine Type: Bolo, Tire Size (in.): 4 x 16, Depth (in.): 8 Forward rotating tines for premium soil preparation PTO for optional attachments 4 forward and 2 reverse speeds Adjustable tilling depth up to 8in. Cast-iron transmission with bronze gears Plow handle [Read more]

Store: Northern Tool and Equipment

Brand: Troy-Bilt

Farm Star Equipment Rotary Tiller 3-Point, Category 1, 66in. Length

$2,199.98

Tillers turn hard ground into perfect seed bed quickly and easily. Rugged and built to last. All models feature a rear deflector to keep the soil beneath the tiller and curved or L-shaped blades for thorough pulverization. Oil-bathed over-sized chain drive, shear-bolt PTO driveline, skid depth adjustment and adjustable lower hitch points. Tillers have working depth of 5in-6in. maximum. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 66, Working Depth (in.): 5 - 6, Max. HP: 40, Required HP: 35 - 40, Offset (in.): 7 1/2, Blades (qty.): 32, Blade Type: L Shaped [Read more]

Store: Northern Tool and Equipment

Brand: Farm Star Equipment

Northern Industrial 3-Pt. Rotary Tiller 71in.L, 50 Blades

$1,399.98

The NorTrac 3-pt. rotary tiller turns up hard ground quickly and easily. Middle gearbox driving system makes working more effective. Hitch Type: 3-Point, Category Type: 2, Working Width (in.): 71, Working Depth (in.): 3 1/2 - 6 3/8, Required HP: 50 - 60, Blades (qty.): 50 Tiller turns up hard ground quickly and easily Middle gearbox driving system makes working more effective Oil-bath gear drive system with skid depth adjustment and adjustable lower hitch PTO shaft is a 6-spline input (tractor side) and an 8-spline output (implement side) Includes rear deflector 790mm PTO shaft [Read more]

Store: Northern Tool and Equipment

Brand: NorTrac

King Kutter XB Rotary Tiller 4ft., Model# TC-48-XB

$1,499.98

King Kutters XB Rotary Tiller is designed for use with sub-compact tractors up to 25 HP. Adjustable shoes control cutting depth while rear shield controls soil mix. This tiller is a must for vegetable or hobby farmers, landscape contractors, nurseries and much more. U.S.A. Hitch Type: 3-Point, Category Type: 1 Pin / 0 Spacing, Working Width (in.): 48, Working Depth (in.): 5 Modified Category 1 subcompact attachment Cat 1 pin Cat 0 spacing 4 tines per flange Slip-clutch protected drive line Cast iron center gear box Chain drive side gear box U.S.A. Model TC-48-XB [Read more]

Store: Northern Tool and Equipment

Brand: King Kutter

Northern Industrial 3-Pt. Rotary Tiller 63In.L, 38 Blades

$1,299.98

The NorTrac 3-pt. rotary tiller turns up hard ground quickly and easily. Middle gearbox driving system makes working more effective. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 63, Working Depth (in.): 4 - 5 1/2, Required HP: 30 - 45, Blades (qty.): 32 Tiller turns up hard ground quickly and easily Middle gearbox driving system makes working more effective Oil-bath gear drive system with skid depth adjustment and adjustable lower hitch PTO shaft is a 6-spline input (tractor side) and an 8-spline output (implement side) Includes rear deflector 790mm PTO shaft [Read more]

Store: Northern Tool and Equipment

Brand: NorTrac

Northern Industrial 3-Pt. Rotary Tiller 49in.L, 26 Blades

$999.98

The NorTrac 3-pt. rotary tiller turns up hard ground quickly and easily. Middle gearbox driving system makes working more effective. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 49, Working Depth (in.): 4 - 5 1/2, Required HP: 20 - 30, Blades (qty.): 26 Tiller turns up hard ground quickly and easily Middle gearbox driving system makes working more effective Oil-bath gear drive system with skid depth adjustment and adjustable lower hitch PTO shaft is a 6-spline input (tractor side) and an 8-spline output (implement side) Includes rear deflector 790mm PTO shaft Category 1 hitch pin [Read more]

Store: Northern Tool and Equipment

Brand: NorTrac

Ardisam Earthquake Front Tine Tiller, Model# 3365B

$429.98

This Ardisam Earthquake front tine tiller features a powerful Briggs & Stratton 190cc, 4-cycle engine that provides 6.50 ft-lbs. of gross torque and an exclusive cast iron wheel mount assembly and isovibe drag stake that provides stability for better control. Application: Tiller, Working Width (in.): 11 / 16 / 21, Engine: Briggs & Stratton, Engine Type: 4-cycle, Displacement (cc): 190, Torque (ft./lbs.): 6.50, Tine Type: Front, Tire Size (in.): 11, Depth (in.): 11 Tiller features sturdy 1in. steel tine shafts and high alloy brass gears for long life and rugged performance Adjustable till widths of 11in, 16in. or 21in. 11in. tilling depth Handlebar folds down and 11in. wheels tuck under for compact transport and storage [Read more]

Store: Northern Tool and Equipment

Brand: Ardisam

Grower Equipment Tiller Rake 7ft. Length

$3,299.98

Durable tines and reversible scarifying shovels quickly turn hard, compacted ground into a perfect seedbed. Can be changed from a scarifier to a grader, spreader or finishing rake simply by adjusting the top link. Heavy-duty double springs. Great for landscape construction, fire lanes, nursery weed control, soil preparation for sod, and grooming horse arenas, baseball infields and beaches. Truck ship. U.S.A. Factory shipped. Hitch Type: 3-Point, Working Width (in.): 84 [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Yard Machines Tiller 208cc, 18in. Tilling Width, Model# 21AA404B000

$699.98

This powerful tiller has counter-rotating slasher-type tines for easy use and great control. 14in. tires and a loop & bail adjustable handle help you direct the tiller anywhere you need it to go. U.S.A. Application: Tiller, Working Width (in.): 18, Engine: Briggs & Stratton, Engine Type: OHV, Displacement (cc): 205, Overall Width (in.): 24 3/8, Tines (qty.): 12, Tine Type: Slasher, Tire Size (in.): 14, Disc Diameter (in.): 12, Depth (in.): 7 The front bumper protects the tiller [Read more]

Store: Northern Tool and Equipment

Brand: Yard Machines

Farm Star Equipment Rotary Tiller 3-Point, Category 1, 58in. Length

$2,099.98

qTillers turn hard ground into perfect seed bed quickly and easily. Rugged and built to last. All models feature a rear deflector to keep the soil beneath the tiller and curved or L-shaped blades for thorough pulverization. Oil-bathed over-sized chain drive, shear-bolt PTO driveline, skid depth adjustment and adjustable lower hitch points. Tillers have working depth of 5in-6in. maximum. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 58, Working Depth (in.): 6, Max. HP: 40, Required HP: 23 - 38, Offset (in.): 7 1/2, Flanges (qty.): 7, Blades (qty.): 28, Blade Type: L Shaped [Read more]

Store: Northern Tool and Equipment

Brand: Farm Star Equipment

Howse 3-Point Rotary Tiller 54in. Width

$1,669.98

Machine can be offset to either side or centered. A-frame extended for smooth operation. 2 disc torque limiter protects tractor and implement. Removable tine shaft. Heavy duty all gear drive, adjustable skid shoes, suggested use with 25-50 HP. 540 RPM at PTO shaft, 75 HP gear box. 28 13 1/4 in. L by 5/16 in. x 2 1/2 in. W blades, rotor speed of 210 RPM. Digs 7 in. to 10 in. deep. Works with category 1 tractors. Truck Ship. U.S.A. Hitch Type: 3-Point, Working Width (in.): 54, Working Depth (in.): 7 - 10, Required HP: 25 - 50, Blades (qty.): 28 A-frame and gearbox assembly can be reversed Clutch, side shift [Read more]

Store: Northern Tool and Equipment

Brand: Howse

TurboTorch LP-2 Swirl Propane, MAPP, MAP-Pro Torch Kit (0386-0007)

$368.00  $303.60

TurboTorch LP-2 Swirl Propane, MAPP, MAP-Pro Torch Kit (0386-0007)TurboTorch LP-2 Swirl Propane, MAPP, MAP-Pro Torch Kit (0386-0007) Components: R-LP Adjustable Regulator, CGA-510 H-4 Handle H-12 Hose T-3 Tip T-5 Tip Soft solders to 4" (100mm) Silver brazes to 2" (50mm) Instruction Manual*Tank not included [Read more]

Store: PlumberSurplus.com

Brand: TurboTorch

TurboTorch STK-8B Hand Torch Kit EXTREME (0386-0404)

$207.00  $170.78

TurboTorch STK-8B Hand Torch Kit EXTREME (0386-0404)TurboTorch STK-8B Hand Torch Kit EXTREME (0386-0404) Components: STK-R Pressure Regulator CGA-600 ST-3 Tip L-1 Striker Packed in Handy Rugged Plastic Box Instruction Manual*Tank not included [Read more]

Store: PlumberSurplus.com

Brand: TurboTorch

TurboTorch STK-8B Hand Torch Kit EXTREME (0386-0404)

$207.00  $170.78

TurboTorch STK-8B Hand Torch Kit EXTREME (0386-0404)TurboTorch STK-8B Hand Torch Kit EXTREME (0386-0404) Components: STK-R Pressure Regulator CGA-600 ST-3 Tip L-1 Striker Packed in Handy Rugged Plastic Box Instruction Manual*Tank not included [Read more]

Store: PlumberSurplus.com

Brand: TurboTorch

TurboTorch LP-1 Swirl Propane, MAPP, MAP-Pro Torch Kit (0386-0247)

$350.00  $288.75

TurboTorch LP-1 Swirl Propane, MAPP, MAP-Pro Torch Kit (0386-0247)TurboTorch LP-1 Swirl Propane, MAPP, MAP-Pro Torch Kit (0386-0247) Components: R-LP Adjustable Regulator, CGA-510 H-4 Handle H-12 Hose T-4 Tip T-6 Tip Soft solders to 6" (150mm) Silver brazes to 4" (100mm) Instruction Manual*Tank not included [Read more]

Store: PlumberSurplus.com

Brand: TurboTorch

TurboTorch TXK-504 Self Lighting Hand Torch Kit (0386-1295)

$300.00  $247.50

TurboTorch TXK-504 Self Lighting Hand Torch Kit (0386-1295) Self Lighting Hand Torch Hose, adapter and regulator Patented Swirl combustion Flame tube swivels 180 degrees MAPP or Propane gas Trigger lock Easy to clean orifice Heavy duty piezo ignitor Machined rotor Use with CGA 600, 1 lb. MAPP or Propane Tanks*Tank not included [Read more]

Store: PlumberSurplus.com

Brand: TurboTorch

TurboTorch STK-9 Hand Torch Kit EXTREME (0386-0403)

$88.00  $72.60

TurboTorch STK-9 Hand Torch Kit EXTREME (0386-0403)TurboTorch STK-9 Hand Torch Kit EXTREME (0386-0403) Components: STK-R Pressure Regulator CGA-600 ST-3 Tip Easy to Change Orifice Swivels 360 degrees Instruction Manual Torches are built with Turbo Torch swirl combustion All models have 360 degree swivel tips Easy-to-clean orifice, interchangeable tips Use with CGA 600, 1 lb. MAPP, MAP-Pro, Propane Tanks*Tank not included [Read more]

Store: PlumberSurplus.com

Brand: TurboTorch

TurboTorch WSF-3 Sof-Flame Acetylene Torch Kit (0386-0089)

$180.00  $148.50

TurboTorch WSF-3 Sof-Flame Acetylene Torch Kit (0386-0089) AR-MC (CGA 200) Regulator WA-400 Handle AH-12 Hose S-4 Tip Soft Solders to 1" (25mm) "MC" Tank connection Instruction Manual*Tank not included [Read more]

Store: PlumberSurplus.com

Brand: TurboTorch

TurboTorch LP-3 Swirl Propane, MAPP, MAP-Pro Torch Kit (0386-0006)

$280.00  $231.00

TurboTorch LP-3 Swirl Propane, MAPP, MAP-Pro Torch Kit (0386-0006)TurboTorch LP-3 Swirl Propane, MAPP, MAP-Pro Torch Kit (0386-0006) Components: R-LP Adjustable Regulator, CGA-510 H-4 Handle H-12 Hose T-4 Tip, Soft solders to 2-1/2" (60mm) Silver brazes to 1-1/4" (30mm) Instruction Manual*Tank not included [Read more]

Store: PlumberSurplus.com

Brand: TurboTorch

TurboTorch PL-4T STD Swirl Propane, MAPP, MAP-Pro Pro-Line Standard Torch Kit (0386-0830)

$195.00  $175.50

TurboTorch PL-4T STD Swirl Propane, MAPP, MAP-Pro Pro-Line Standard Torch Kit (0386-0830)TurboTorch PL-4T STD Swirl Propane, MAPP, MAP-Pro Pro-Line Standard Torch Kit (0386-0830) Components: H-4 Handle PL-4T Tip*Tank not included [Read more]

Store: PlumberSurplus.com

Brand: TurboTorch

Propane Torch Kit 500, 000 BTU

$29.98

Burns weeds and stumps! Heats roof materials, water and sand. Thaws pipes, heats motors, melts ice and snow. With safety valve. Max. BTU: 500,000, Hose Length (ft.): 6, Handle Length (in.): 23 1/4, Automatic Igniter: No, Burner Head: Single, Regulator Included: No, Tank Included: No, Min. Propane Cylinder Size (lbs.): 20 [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Dual Turbo Propane Torch Kit 1, 125, 000 BTU

$39.99

Dual torch works twice as fast as a single torch! Our largest torch kit is great for big jobs extensive weeds or larger stumps! Also works for heating roof materials, water and sand. Thaws pipes, heats motors, melts ice and snow. Includes safety valve. Max. BTU: 1,125,000, Hose Length (ft.): 10, Automatic Igniter: No, Burner Head: Double, Regulator Included: No, Tank Included: No, Min. Propane Cylinder Size (lbs.): 20 [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Single-Head Heating Torch Kit 450, 000 BTU

$54.99

For use with propane gas to burn weeds and unwanted vegetation without chemicals. Great for heating roofing materials, water and sand. Thaws pipes, heats motors and melts away ice and snow. Max. BTU: 450,000, Hose Length (ft.): 10, Handle Length (in.): 22, Automatic Igniter: Yes, Burner Head: Single, Tank Included: No, Min. Propane Cylinder Size (lbs.): 20 [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Propane Torch Kit 500, 000 BTU

$74.98

Burns weeds and stumps! Heats roof materials, water and sand. Thaws pipes, heats motors, melts ice and snow. With 10-ft. hose, safety P.O.L. Valve & flame head. CSA certified. U.S.A. Max. BTU: 500,000, Hose Length (ft.): 10, Handle Length (in.): 27 1/2, Automatic Igniter: No, Burner Head: Single, Tank Included: No, Min. Propane Cylinder Size (lbs.): 20 For use without a regulator connects directly to a 20-lb. or larger tank Length of Burner Head: 6 1/2 in. [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Propane Torch Kit 1, 000, 000 BTU, Model# JET 410 C

$189.99

Power Jet burner melts ice, incinerates weeds and tree stumps, and performs other heating tasks. With steel pilot tip, 0-100 PSI pressure regulator, excess flow POL valve, aluminum extender tube and instructions. U.S.A. Max. BTU: 1,000,000, Hose Length (ft.): 10, Handle Length (in.): 40 1/2, Burner Head: Single, Flame Control Trigger: Yes, Regulator Included: No, Min. Propane Cylinder Size (lbs.): 100 [Read more]

Store: Northern Tool and Equipment

Brand: Northern Tool and Equipment

Flame Weed Dragon Torch Kit 100, 000 BTU

$69.98

Fully assembled and ready to go, the Weed Dragon is ideal for use around the home and garden. Homeowners can now kill weeds, or melt ice, safely and naturally without exposing children or pets to chemicals! Kit includes a 27in. torch with plastic grip, flame adjusting needle valve, hand-tighten P.O.L. fitting and spark lighter. CSA certified. Not for use with disposable cylinder. U.S.A. Max. BTU: 100,000, Hose Length (ft.): 10, Handle Length (in.): 27 1/2, Automatic Igniter: No, Burner Head: Single, Regulator Included: Yes, Tank Included: No [Read more]

Store: Northern Tool and Equipment

Brand: Flame

Generico 9-Pc. Welding and Cutting Torch Kit Model# 72B-WOR-SP

$99.98

Medium duty set includes cutting attachment, cutting tip, welding handle, mixer, 3 welding tips, tip cleaner set, striker and instructions. UL listed, Victor compatible. Tip Type: 1 Cutting, 3 Welding [Read more]

Store: Northern Tool and Equipment

Brand: ProWeld

Northern Industrial Tools OxyAcetylene Torch Kit Victor-Style, Model# 15826236

$129.99

edium-duty torch kit is perfect for welding, cutting, gouging, and heating. Tip Type: 0 welding and 1 cutting, Regulator Included: Yes, Degree of Angle ( ): 45, Welds Up To (in.): 5/64 with 0 tip, 1/2 with optional 5 tip, Cuts Up To (in.): 1/2 with 0 tip, 2 1/2 with optional 3 tip, Tool Length (in.): 14 welding with tip, 16 1/2 with cutting attachment, Hose Length (ft.): 12 1/2, Works With: Acetylene fuel Torch handle/check valves Cutting attachment Fuel and oxygen regulators 12 1/2 feet of RGA-approved Grade R 3/16in. twin line hose for acetylene gas Also includes goggles, striker and tip cleaner Regulators, cutting attachment and torch handle are UL listed [Read more]

Store: Northern Tool and Equipment

Brand: Northern Industrial Tools

Northern Industrial Tools Victor-Style Torch Kit with Tote

$169.99

This Northern Industrial portable Victor-style oxyacetylene torch kit includes a torch handle, cutting attachment, rear entry oxygen and acetylene regulators (all UL listed), along with RMA approved 12.5-ft, 3/16in. twin line hose and #0 welding and #0 cutting tips, all in an easy-to-carry tote with waterproof storage compartment. Cylinders not included. Tip Type: #0 cutting tip, #0 welding tip, Regulator Included: Yes, oxygen and acetylene, Degree of Angle ( ): 90, Welds Up To (in.): 3/8, Cuts Up To (in.): 6, Hose Length (ft.): 12 1/2 [Read more]

Store: Northern Tool and Equipment

Brand: Northern Industrial Tools

Torch Kit. 1 Kit

$92.00  $63.49

Manufacturer: Red Dragon. 1 Kit. Torch head is 2 1/2" in diameter and is useful when a large burner would prove awkward, such as branding iron forge Gas Type = Propane Output Power = 400000 Btu/h [Max] Operating Pressure = 25.0 psi, 5.0 psi [Min], 90.0 p [Read more]

Store: ReStockIt.com

Brand: Red Dragon

50 000 Btu Torch Kit. 1 Kit

$94.50  $64.99

Manufacturer: Red Dragon. 1 Kit. Shop Torch Great for small jobs and detail work 1-1/2" diameter head Gas Type = Propane Output Power = 50000 Btu/h [Max] Operating Pressure = 18.0 psi, 5.0 psi [Min], 25.0 psi [Max] Inlet Size = 1/4 in (NPT) Handle Length [Read more]

Store: ReStockIt.com

Brand: Red Dragon

Torch Kit. 1 Kit

$96.00  $65.99

Manufacturer: Red Dragon. 1 Kit. Simple, lightweight, easy to use and very effective Perfect for farm, home, industry and construction Made in the U.S.A Gas Type = Propane Output Power = 500000 Btu/h [Max] Operating Pressure = 30.0 psi, 5.0 psi [Min], 90 [Read more]

Store: ReStockIt.com

Brand: Red Dragon

Trigger Start Propane Torch Kit. 6 Kits

$184.08

Manufacturer: Bernzomatic. 6 Kits. Stainless steel burn tube and brass tip for durability Adjustable flame control Gas Type = Propane Flame Body Material = ABS (Acrylonitrile-Butadiene-Styrene) Process = Soldering, Heating Includes = 14.1 oz Propane Cyli [Read more]

Store: ReStockIt.com

Brand: BernzOmatic

1/2"" Heavy Duty Impact Wrench w/2"" Extended Anvil. Sold Individually

$286.24  $133.28

Manufacturer: Chicago Pneumatic. Each. Features Benefits: Patented clutch provides smooth operation and extreme durability Comfort and control with new ergonomic grip and trigger Low air consumption and high torque makes this tool the most efficient in [Read more]

Store: ReStockIt.com

Brand: Chicago Pneumatic

1"" Impact Wrench w/6"" Anvil. Sold Individually

$921.18  $536.57

Manufacturer: Chicago Pneumatic. Each. Features Benefits 1450 ft lbs torque provides power to loosen rusted bolts High Performance Clutch means longer life and durability Efficient 6 Vane Motor - power with any air supply Three Position Regulator and D [Read more]

Store: ReStockIt.com

Brand: Chicago Pneumatic

1/2"" Composite Impact Wrench w/2"" Extended Anvil. Sold Individually

$363.11  $182.33

Manufacturer: Ingersoll Rand. Each. Features Benefits: 600 ft./lbs. of maximum torque Full stroke tease throttle and an easy glide forward/ reverse switch Includes a 2" extended anvil Multi position power management The lightweight reinforced aluminum [Read more]

Store: ReStockIt.com

Brand: Ingersoll Rand

1/2"" Drive Super Duty Air Impact Wrench w/2"" Extended Anvil. Sold Individually

$336.24  $175.30

Manufacturer: Ingersoll Rand. Each. Features Benefits: In-handle exhaust directs air away from user Contoured comfort handle 590 ft./lbs. maximum torque Pressure feed lubrication system Adjustable power regulation The classic IRT231 series has set the [Read more]

Store: ReStockIt.com

Brand: Ingersoll Rand

Small, Lightweight Magnesium 1/2"" Drive Impact Wrench w/2"" Anvil. Sold Individually

$480.67  $290.87

Manufacturer: Chicago Pneumatic. Each. Features Benefits Small and Lightweight - 6.3" long and 2.7 lbs Lightweight, yet durable composite housing 500 ft/lbs torque - high performance dual chamber motor featuring magnesium components Magnesium and compo [Read more]

Store: ReStockIt.com

Brand: Chicago Pneumatic

3/4"" Drive Heavy Duty Impact Wrench w/6"" Anvil 1200 ft/lbs. Torque. Sold Individually

$723.33  $430.33

Manufacturer: Chicago Pneumatic. Each. Features Benefits 1,200 ft/lbs of ultimate torque providing power to loosen the toughest fastener Twin Hammer high performance clutch for longer life under tough conditions Efficient 6 Vane Motor - power with any [Read more]

Store: ReStockIt.com

Brand: Chicago Pneumatic

1"" Drive Extra Heavy Duty Impact Wrench w/6"" Anvil. Sold Individually

$973.85  $811.00

Manufacturer: Chicago Pneumatic. Each. Features Benefits: Durable rocking dog clutch ideal for tire work Teasing throttle for easy bolt starting Convenient reverse valve for easy directional changes Applications: high volume tire work on trucks, buses [Read more]

Store: ReStockIt.com

Brand: Chicago Pneumatic

Chisel & Cross Chisel Longnek Tomahawk w/. Sold Individually

$15.00  $10.49

Manufacturer: Atlas Welding Accessories. Each. The Atlas "Long Nek" head design offers 50% greater handle support and protection from handle splinter caused by working over an edge Select Hickory handles are hand fitted and secured in the head by our uniq [Read more]

Store: ReStockIt.com

Brand: Atlas Welding Accessories

Scalemaster Chisel And Cross Chisel Easy Grip. Sold Individually

$16.00  $9.99

Manufacturer: Atlas Welding Accessories. Each. Scalemaster "Easy-Grip" handles allow fast pick up even while wearing heavy welders gloves Head Type = Chisel Cross Chisel Head Handle Type = Flat Grip Overall Head Material = Steel Handle Material = Steel [Read more]

Store: ReStockIt.com

Brand: Atlas Welding Accessories

Chisel&cross Chisel Pattern Welders Chi. Sold Individually

$16.24  $6.29

Manufacturer: Atlas Welding Accessories. Each. These popular models feature "Flex-O" steel coil hand grips welded to tough steel handle shafts. Heads are "pinned" for safety and reliability Manufactured under the same rigid standards as all hammers Heads [Read more]

Store: ReStockIt.com

Brand: Atlas Welding Accessories

18"" Cold Chisel Air Chisel. Sold Individually

$28.76

Manufacturer: Old Forge. Each. Features Benefits: Designed to cut bolts, nuts, tees, angles and frame members Blade is 5/8" Weight: 1 lb. Customers also search for: Discount 18" Cold Chisel Air Chisel, Buy 18" Cold Chisel Air Chisel, Wholesale 18" Col [Read more]

Store: ReStockIt.com

Brand: Old Forge

Replacement Punch Kit for XHC 3300 Punch, Three 11/32"" Heads and 6 Punch Disks. Set

$59.99  $40.31

Manufacturer: Carl Manufacturing, usa Inc. Set. XHC-3300 Extra Heavy-Duty 300-Sheet Capacity 3-Hole Punch, Replacement Punch Heads Drills through 300 sheets of paper with ease. Heavy-gauge steel construction with nonskid base. Replacement Punch Heads/Disk [Read more]

Store: ReStockIt.com

Brand: Carl Manufacturing,usa Inc.

3 Piece Punch Kit. 1 Kit

$47.49

Manufacturer: Sunex. 1 Kit. Features Benefits Works with Presses up to 50 Tons Made in USA This 3 piece punch kit includes the following sizes: 1/2", 1" and 2". Customers also search for: Discount 3 Piece Punch Kit, Buy 3 Piece Punch Kit, Wholesale 3 P [Read more]

Store: ReStockIt.com

Brand: Sunex

8 Piece Knurled Pin Punch Kit. Sold Individually

$25.81

Manufacturer: Mayhew Tools. Each. Features Benefits: Full finish Knurled handle to to provide a grip for fingers Made of S2 stainless steel All included in a handy storage carrying case Made in the USA These pin punches are shaped like a thin rod, with [Read more]

Store: ReStockIt.com

Brand: Mayhew Tools

5 Piece Extra Long Pin Punch Kit. Sold Individually

$34.03

Manufacturer: Mayhew Tools. Each. Features Benefits: Full finish Made of S2 stainless steel Extra long shank Overall length is 8" Packaged in handy storage pouch Made in the USA These pin punches are shaped like a thin rod, with knurled handles. Used f [Read more]

Store: ReStockIt.com

Brand: Mayhew Tools

Extra Heavy-Duty xhc-2300 Two-Hole Punch, Replacement Punch Head, 9/32 Dia.. 1 Kit

$50.59  $36.24

Manufacturer: Carl Manufacturing, usa Inc. 1 Kit. Drill 9/32 holes through 300 sheets with ease thanks to a strong handle grip and hardened precision-ground all-steel punch heads. Built-in paper guide ensures accurate paper positioning. Transparent waste [Read more]

Store: ReStockIt.com

Brand: Carl Manufacturing,usa Inc.

112-k 12 Piece Pilot Punch. 1 Kit

$113.66  $66.49

Manufacturer: Mayhew Tools. 1 Kit. Cutter Cutting Tip Size = 1/16 in, 5/64 in, 3/32 in, 1/8 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in, 3/8 in, 7/16 in, 1/2 in Handle Overall Includes = Pouch Stock Shape = Round, Knurled Tip Blade Material = Alloy St [Read more]

Store: ReStockIt.com

Brand: Mayhew Tools

446k 5 Piece Long Pin Punch. 1 Kit

$39.75  $22.79

Manufacturer: Mayhew Tools. 1 Kit. Cutter Cutting Tip Size = 1/8 in, 3/16 in, 1/4 in, 5/16 in, 3/8 in Handle Overall Includes = Pouch Stock Shape = Hex Tip Type = Round Blade Material = Alloy Steel Finish = Sand Blasted Handle Type = Punch Set Wt. = 1.23 [Read more]

Store: ReStockIt.com

Brand: Mayhew Tools

CARL Extra Heavy-duty Hole Punch Kit

$29.99

0% 1 Each 60003 72-sheet capacity Replacement punch kit features precision-ground Samurai Steel and hollow-core punch head for CARL Extra Heavy-duty Three-hole Punch with a 72-sheet capacity. CARL Carl Manufacturing USA, Inc Extra Heavy-duty Hole Punch Kit No Punch Head Kit Silver www. carl-products.com [Read more]

Store: The Nerds

Brand: Carl Brands

CARL Replacement Punch Kit

$38.99

0% 1 Each 150 sheet capacity 60002 Replacement punch kit features precision-ground Samurai Steel and hollow-core punch head for CARL Extra Heavy-duty Three-hole Punch with a 150-sheet capacity. CARL Carl Manufacturing USA, Inc No Punch Head Kit Replacement Punch Kit Silver www. carl-products.com [Read more]

Store: The Nerds

Brand: Carl Brands

CARL Replacement Punch Kit

$41.99

0% 0.28" 60004 Replacement Punch Kit 3 x Punch Heads 6 x Drill Disks Replacement punch head kit supplies Carl Manufacturing's Extra Heavy-Duty Three-Hole Punch. This set includes three punch heads and six drill disks. CARL Carl Manufacturing USA, Inc No Punch Head Kit Replacement Punch Kit Silver www. carl-products.com [Read more]

Store: The Nerds

Brand: Carl Brands

Husqvarna CRT900LS Rear Tine Tiller - 160cc Honda GCV160 Engine, 17in. Tilling Width

$999.98

This tillers high-speed counter-rotating agricultural tines make light work of your toughest yard projects. It s perfect for preparing large flowerbeds and vegetable gardens. Heavy-tread ag. tires for grip in both cultivated and muddy soil. Application: Tiller, Working Width (in.): 17, Engine: Honda, Engine Type: GCV160, Displacement (cc): 160, Torque (ft./lbs.): 4.6, Overall Width (in.): 18 3/4, Tines (qty.): 10, Tine Type: Rear, Disc Diameter (in.): 17, Disc Type: Rear, Depth (in.): 6 1/2 Easy-adjust drag bar for balance in different working conditions [Read more]

Store: Northern Tool and Equipment

Brand: Husqvarna

Poulan Pro Front Tine Forward Transmisson Tiller - 24in, Model# FT900

$349.98

The Poulan Pro FT900 single-rotation forward transmisson front tine tiller delivers 9 ft-lbs. of torque to power through a 24in.W tilling path. The 900 Series, 208cc LCT engine drives four 8in. dia. discs (16 tines) through packed earth up to 6in. deep. Forward rotation only. Six multi-position depth stakes. 8in. poly rubber tires. U.S.A. Application: Tiller, Working Width (in.): 24, Engine: LCT, Engine Type: 900 series, Displacement (cc): 208, Torque (ft./lbs.): 9, Overall Width (in.): 25, Tines (qty.): 16, Tine Type: Front, Height Range (in.): 32 3/4, Tire Size (in.): 8 x 1.75, Disc Diameter (in.): 8, Disc Thickness (in.): 1 3/4, Depth (in.): 6 [Read more]

Store: Northern Tool and Equipment

Brand: Poulan Pro

Husqvarna Rear Tine Tiller - 17in.W, 208cc, Model# DRT900

$699.98

This powerful tiller has counter-rotating tines and one-gear forward and reverse drive for easy operation, control and transport. A counterweight ensures safe, balanced and sturdy operation by increasing weight on the wheels. U.S.A. Not for sale in California. Application: Tiller, Working Width (in.): 17, Engine: Briggs & Stratton, Engine Type: OHV, Displacement (cc): 208, Torque (ft./lbs.): 9, Overall Width (in.): 23 1/2, Tine Type: Rear, Tire Size (in.): 13 x 5 Agricultural tires with heavy treads give a better grip in cultivated and muddy soil FWRD & RVRS gear transmission 3850 RPM 3-qt. fuel tank [Read more]

Store: Northern Tool and Equipment

Brand: Husqvarna

Yard Machines Front Tine Tiller - 24in. Tilling Width, 158cc Briggs and Stratton Series 500 Engine, Model# 21A-240P000

$349.98

This 158cc front tine tiller is ideal for preparing established garden beds and maintaining gardens throughout the season. Powered by a Briggs & Stratton 500-Series engine. 12in. steel tines hold up to heavier soil. U.S.A. Application: Tiller, Working Width (in.): 13 / 22 / 24, Engine: Briggs & Stratton, Engine Type: 500 series, Displacement (cc): 158, Tine Type: Front, Tire Size (in.): 5, Depth (in.): 6 3-position adjustable tilling width at 13in, 22in. and 24in. allows the operator to till a more narrow or wide path 6in. tilling depth with height adjusters Handles fold for storage [Read more]

Store: Northern Tool and Equipment

Brand: Yard Machines

Husqvarna FT900CARB Front Tine Tiller - 205cc, 24in. Tilling Width, CARB-Approved

$449.98

This Husqvarna Front Tine Tillers size and power make it perfect for homeowners that want to be able to prepare garden patches and flowerbeds without having to use a spade. The Power forward and reverse gears make it easy to power through soil with the 13in. dia. forged steel disks. Application: Tiller, Working Width (in.): 12 / 22 / 24, Engine: Briggs & Stratton, Engine Type: OHV, Displacement (cc): 205, Torque (ft./lbs.): 9, Overall Width (in.): 26, Tines (qty.): 16, Tine Type: Front, Tire Size (in.): 8 x 1 3/4, Disc Diameter (in.): 13, Disc Thickness (in.): 0.195 / 0.179, Disc Type: Welded, Depth (in.): 6 1/2 3-position adjustable tilling width: 12in./22in./24in.W [Read more]

Store: Northern Tool and Equipment

Brand: Husqvarna

Husqvarna Rear Tine Tiller - 17in.W, 208cc, Model# DRT900CARB

$749.98

This powerful tiller has counter-rotating tines and power forward and reverse drive for easy use, control and transport. A counterweight increases weight on the wheels and increases balance for safe and sturdy operation. U.S.A. Application: Tiller, Working Width (in.): 17, Engine: Briggs & Stratton, Engine Type: OHV, Displacement (cc): 208, Torque (ft./lbs.): 9, Overall Width (in.): 23 1/2, Tines (qty.): 10, Tine Type: Rear, Disc Diameter (in.): 13, Disc Thickness (in.): 0.1046 Agricultural tires with heavy treads give a better grip in cultivated and muddy soil [Read more]

Store: Northern Tool and Equipment

Brand: Husqvarna

Husqvarna FT900 Front Tine Tiller - 205cc, 24in. Tilling Width, Not CARB-Approved

$399.98

This Husqvarna Front Tine Tillers size and power make it perfect for homeowners that want to be able to prepare garden patches and flowerbeds without having to use a spade. The Power forward and reverse gears make it easy to power through soil with the 13in. dia. forged steel disks. Application: Tiller, Working Width (in.): 12 / 22 / 24, Engine: Briggs & Stratton, Engine Type: OHV, Displacement (cc): 205, Torque (ft./lbs.): 9, Overall Width (in.): 26, Tines (qty.): 16, Tine Type: Front, Tire Size (in.): 8 x 1 3/4, Disc Diameter (in.): 13, Disc Thickness (in.): 0.195 / 0.179, Disc Type: Welded, Depth (in.): 6 1/2 3-position adjustable tilling width: 12in./22in./24in.W [Read more]

Store: Northern Tool and Equipment

Brand: Husqvarna

Hawkline by Behlen Country Category 1 Rotary Tiller - 60in.W, Model# 80111910YEL

$1,799.98

This Hawkline by Behlen Country Category 1 heavy-duty rotary tiller works the hardest ground with ease. Heavy cast iron center gearbox, gear-driven side gearbox with a heavy-duty slip clutch drive line. U.S.A. Hitch Type: 3-pt, Category Type: 1, Working Width (in.): 58, Working Depth (in.): 4, Max. HP: 40, Required HP: 25, Blades (qty.): 42, Blade Type: Angle Six self-sharpening heat-treated tines per flange with adjustable runners [Read more]

Store: Northern Tool and Equipment

Brand: HawklineBehlen

NorTrac 47in. 3-Pt. Rotary Tiller

$999.98

30 steel blades turn up hard ground quickly and easily. Rear deflector. Category 1 hitch, and 18-25 HP required. 540/1000 rpm PTO driveline with 47in. working width and 3 1/8in. to 4 11/16in. depth. Oil-bath gear drive system with fixed skid plate and adjustable lower hitch. [Read more]

Store: Northern Tool and Equipment

Brand: NorTrac

Hawkline by Behlen Country Category 1 Rotary Tiller - 72in.W, Model# 80111920YEL

$2,099.98

This Hawkline by Behlen Country Category 1 heavy-duty rotary tiller works the hardest ground with ease. Heavy cast iron center gearbox, gear-driven side gearbox with a heavy-duty slip clutch drive line. U.S.A. Hitch Type: 3-pt, Category Type: 1, Working Width (in.): 72, Working Depth (in.): 4, Max. HP: 40, Required HP: 25, Blades (qty.): 48, Blade Type: Angle Six self-sharpening heat-treated tines per flange with adjustable runners [Read more]

Store: Northern Tool and Equipment

Brand: HawklineBehlen

Hawkline by Behlen Country Category 1 Rotary Tiller - 48in.W, Model# 80111900YEL

$1,699.98

This Hawkline by Behlen Country Category 1 heavy-duty rotary tiller works the hardest ground with ease. Heavy cast iron center gearbox, gear-driven side gearbox with a heavy-duty slip clutch drive line. U.S.A. Hitch Type: 3-pt, Category Type: 1, Working Width (in.): 46, Working Depth (in.): 1 - 4, Max. HP: 40, Required HP: 25, Blade Type: Hardened Six self-sharpening heat-treated tines per flange with adjustable runners [Read more]

Store: Northern Tool and Equipment

Brand: HawklineBehlen